FASCO Super Slick 2000 Install On My Duck Boat Build! (Full walkthrough tutorial!)

[@c-baumbaumgart6613]

Thanks for making this best super slick 2000 how to on KZbin I’ve seen.

[@Take-emTv99]

Thank you! I appreciate it.

[@kadekash2883]

Very helpful thanks for the tips and tricks.

[@Take-emTv99]

Of course!

[@coltensawyer6761]

Hey what do you think of that roller set on the trailer. I have a riveted Jon boat that I got with those on there trying to decide weather to keep rollers or do regular bunks. I feel like all the weight being on those points will dent it. Have you had that ?

[@Take-emTv99]

I could definitely see some small divots in the bottom of the boat, but no real damage. My boat is a 1982 bass tracker and have been on this trailer all its life. So I don’t really see any damage being done. However for a duck boat I really like the rollers. Sometimes loading and unloading the boat into shadow water is really difficult, but the rollers make easy work of it. Plus I feel like I have more points of contact with the trailer by having the roller.

[@c-baumbaumgart6613]

When taking off Jon boat paint I highly recommend using paint stripper followed by a wire brush on an angle grinder, works wonders. Note dont use a super aggressive wire brush.

[@Take-emTv99]

That would definitely be a great option. Unfortunately some paint strippers just don’t work great some times and I didn’t wanna spend a bunch of money on the expensive stuff! However we did have really good success useing the wire brush and the going over it with 80 grit sandpaper as much as we could. Tried to follow manufacturer instructions as best as possible.

[@utahlakewaterfowlassociati996]

For future paint removal, use aircraft stripper, do it on a warm day, take a hose or pressure washer afterwards, hell of a lot faster

[@mrsir2378]

Oven cleaner is cheaper and far more effective

[@Take-emTv99]

I believe the old paint that was on the boat was some kind of epoxy. The paint stripper I used has worked wonders in my buddy’s boat but just not mine.

[@danyo2453]

How many ounces was the pigment bottle? Trying to buy on Amazon but doesn’t come with pigment.

[@Take-emTv99]

The bottle I bought was 4oz, they say 1oz per quart kit

[@perrymason7492]

On my kit and it was one gallon kit it was 4 ounces one ounce per quart

[@perrymason7492]

I used a drill mixer and it done just fine

[@Take-emTv99]

I was just following their instructions online. I’m glad it worked for you!

[@rhettbailey3833]

hey bud how wide and long is your duck boat ?

[@Take-emTv99]

Bottom width is 50in and it 16 ft long