Fast Cure Mold Making Silicone

[@JakeThompson]

Hello everyone! I hope you liked the video. Check out my silicone molds HERE www.northsidecustomcrafts.com/new-products/silicone-molds

[@wandapiedra8973]

I am in love with the mold! Single one is my favorite! I hope I win 🤞

[@JakeThompson]

@@wandapiedra8973 Thank you Wanda😀😀

[@PowwowRoDogg]

Hope I win 💪🏽🙌🏽

[@snowmoon83]

Single mold. No more hammering the blanks out. Thank you Jake.

[@JakeThompson]

Very welcome!! 👍🍀good luck

[@Toonpish]

Single mould thank you so much Jake. Great video

[@JakeThompson]

Thank you .. Good luck 👍🍀

[@southwindswoodworks8260]

Nice work Jake 👍🏼👍🏼 The gold in the blanks is sweet! I think I’d prefer the singles mold. Cheers!

[@JakeThompson]

Thank you Buddy 👍👍🍀 Good luck!!

[@hilariethompson9934]

Those are the prettiest pen blanks that you have ever made!!! Love it!!

[@JakeThompson]

Awww They aren’t bad.. 😀😀

[@TravisMoore813]

Impressive! Single blank mold would be great. Thanks for sharing the video.

[@JakeThompson]

Thank you Travis! 👍👍

[@lakeshorewoodturner5136]

They really turned out great Jake and those blanks are awesome. I like the individual mold the most pop it out and you are ready.

[@JakeThompson]

awesome.. I’m glad you like it.. good luck! 👍👍

[@annemcdonley5983]

Very informative. You make me want to learn how to make a mold using your method. Very cool. Appreciate you taking the time to share this with all of us!

[@JakeThompson]

Thank you Anne .. I’m glad you like the videos.. good luck 🍀

[@anubin7625]

Just getting started making pens and pencils with my son. Beautiful work. Single mold.

[@JakeThompson]

Thank you Jason!!👍👍

[@TLFWorks]

Great video Jake, Thanks for all you do. That stuff cures fast. I guess this means I have entered you giveaway. I like that single mold. I hope I get to see you live stream the Virtual Craft Festival. They are always fun.

[@JakeThompson]

Thanks Buddy.. See ya on the 29th 🍀👍

[@TimeLessTraveled]

block mold because you always give great instructions.

[@JakeThompson]

Thank you 👍👍

[@chunt4300]

LOVE this!!! I'm going to get some and try it. Was waiting for you to demo!!!!!!!!!

[@JakeThompson]

Awesome.. have fun with it 👍👍

[@lauracoopey3062]

Wow great video Jake! Either mold would be great but the single mold would be awesome. Thank you!

[@JakeThompson]

Thank you Laura.. good luck 🍀

[@stevegronsky8904]

The gold in the pen blanks is awesome!!!! Good job, Jake.

[@JakeThompson]

Thanks Steve.. I love those colors

[@BeInspiredwithDominic]

Those are some beautiful metalic blanks, Jake! Well done, and a cool mold to begin with - especially the single mold. Thanks for sharing!

[@JakeThompson]

Thank you Dominic!👍👍

[@kamenvelitchkov6533]

The pen blanks are very , very good! And the molds are like machine made, just perfect! Really good job Jake !

[@JakeThompson]

Thank you Kamen. 👍👍

[@fil232323]

Single mold indeed ;) Great Job

[@JakeThompson]

👍👍👍👊

[@deekocur9674]

Great molds and awesome pen blanks! Single mold please 👍😀

[@JakeThompson]

Thank you Dee .. glad you enjoyed. 👍👍

[@Musker824]

That was almost unbelievable! Mold to resin blanks! Seeing is believing. Awesome video Jake

[@JakeThompson]

Thank you!! I’m glad you enjoyed it. 👍👍👊

[@breteckert3093]

Awesome molds 👍👍 i was thinking about the fast cure silicone now that i seen this video i might get it. Single mold , great video

[@JakeThompson]

Thank you Bret.. good luck!! 🍀

[@OConnor4635]

They look awesome. Thank you and block mold

[@JakeThompson]

👍👍

[@joshmorris8510]

Like the way they came out! The block mold would be awesome.

[@JakeThompson]

Thank you Josh! 👍👍😀

[@angim8984]

I really like how those blanks turned out. I'd prefer the single mold.

[@JakeThompson]

Awesome!! Thank you Anji 😀

[@jeffs7944]

Good job, Jake! Single mold is my preference.

[@JakeThompson]

Thank You Jeff.. 👍😀

[@theclarks6280]

Love the molds. Having a larger mold for individual blanks is a great use of the space in the larger pressure pots

[@JakeThompson]

Thank you Scott!! 👍👍👊

[@2unruly]

Great video, single mold... I'm also looking forward to when you start selling these. Keep up the great work!!

[@JakeThompson]

Thank you Bill .. stay tuned!! 👍👍

[@JakeThompson]

If you are still interested, plz message me on instagram, facebook, email.. Thank you

[@robswitzer5555]

Single mold. Thanks for that video, Jake, very informative.

[@JakeThompson]

Thank you Rob!👍👍

[@eweisshf]

Block mold or single mold both would be amazing!

[@JakeThompson]

👍👍😀😀

[@curtisbancroft4070]

Great Video Jake! the molds look amazing. love both the block mold and singles also

[@JakeThompson]

Thank you Curtis!! 👍👍

[@nathanchappell9131]

Block mold. 😁 Love it!! Another great video Jake! You make this stuff seem so easy. Thanks so much! 👍🏻

[@JakeThompson]

Thank you Nathan 😀👍 Good luck 🍀

[@boneyardwoodturning1811]

That's some cool stuff makes a awesome pattern love the block mold right on!

[@JakeThompson]

Thank you 😀😀 Good Luck! 🍀

[@TurningsbyTurner]

Single mold. Good video Jake! 👍

[@JakeThompson]

Awesome .. Thank you David!!

[@brandoncariveau]

Great video. When I get a chance I’ll have to try myself, but for now I’d live the single mold for my pens.

[@JakeThompson]

Thank you Brandon!👍👍

[@larabaker1]

Before I say which mold, I wanted to say I'm so glad I found you on You Tube. I have watched several of your videos and find them to be very thorough and informative. My favorite part is always the clapping on of the gloves. I have been wanted to learn how to make molds and this product seems like a good option for me. Before I get to it though, would love to win the block mold. Thanks for sharing your knowledge with all of us out here.

[@JakeThompson]

Thank you so much.. I’m glad you found the channel.. welcome aboard.. I’m glad you enjoy the videos.. Good luck. 👍👍

[@SpitFire-fj6ip]

Single Mold - nice to see improvements in the manufacturing of the silicone mixtures I just wish they would give a bit more working time. I enjoy watching your instructional videos keep up the great work

[@JakeThompson]

This stuff mixes lots easier than other silicone I’ve used.. it was mixed fast and was easier to stir 👍👍

[@misfit4777]

Very cool project. Single mold

[@JakeThompson]

Thank you .. Good Luck!! 🍀

[@jencstephens5452]

It's great to see they can be used in the pressure pot, and I would love to have either the block mold or the single mold.

[@JakeThompson]

Thank you Jen.. Glad you enjoyed!! Good luck!! 🍀

[@kris_kreations]

Awesome video, Jake, as usual. And those molds and blanks turned out great!!

[@JakeThompson]

Thank you Kris 😀😀 I’m glad you enjoyed

[@stephanielambert891]

Single mold. I was skeptical when I saw this product come out but I think I'm going to give it a try. Thanks for great video & giveaway 🙂

[@JakeThompson]

I have used fast cure silicone before so I was thinking this stuff would be the same.. it’s way better

[@CindyKGenX]

Single mold! Great job!

[@JakeThompson]

Thank you Cindy!👍👍

[@joanbusby3213]

Great video, love the block mold

[@JakeThompson]

Thank you Joan! 👍👍

[@cjcsr1]

As always Jake wonderful content. Would love the pen blank mold.

[@JakeThompson]

Awesome!! Thank you!! 👍👍

[@jenniferrushton8533]

These molds look so awesome. It definitely would cut down on the mess to have the single blank molds!! I hate cleaning up resin dust! Lol

[@JakeThompson]

Thank you Jennifer. Glad you enjoyed.. Good Luck!! 👍👍

[@ConnieConnie824]

Pen Blanks also came out beautiful 😊

[@JakeThompson]

Thank you Connie ☺️☺️☺️

[@superincognito7322]

Great Video Jake! the molds look amazing. I missed the premiere on accident. Cant wait for the VCF on the 29th. The blanks looked super cool. Single blank mold. Enjoy your day! Great video as always.

[@JakeThompson]

Good stuff.. Thanks Alex!! Good luck 🍀 see you on the 29th

[@jameskekalos2702]

Block mold! Love your stuff!

[@JakeThompson]

Thank you James! 👍👍

[@barbaraharmer7353]

Always interesting, with new ideas. Love it. Block mold please.

[@JakeThompson]

Thank you Barbara 😀😀

[@barbaraharmer7353]

Went ahead and bought the Fast Cure Mold Making Silicone using your discount code. Thanks Jake.

[@JakeThompson]

@@barbaraharmer7353 Totally appreciate it Barbara.. Thank you!!

[@JakeThompson]

You win Barbara.. please message me on Instagram or Facebook

[@BrickhouseCraftWorks]

Great video Jake!! Been looking at this stuff ever since it came out but, was a little skeptical of it not requiring degassing. After watching this video though, I think I’ll pull the trigger on some and give it a shot! Thanks for doing this! - Seth

[@JakeThompson]

Awesome Seth.. it worked great.. I didn’t believe it either .. but I was wrong.

[@Vintauri]

I've been following you for a while on Instagram, how did I miss subscribing to your KZbin? Love all your pen blank content! I'd love the mold with the larger block in the middle.

[@JakeThompson]

Awesome.. welcome to the channel!! 👍😀😀

[@vinniebaio2535]

Those look great. Block mold

[@JakeThompson]

Thank you Vinnie 👍👍👊

[@Highlandboxes]

Very nice I can’t get this stuff in uk sadly but great results Jake :-)

[@Highlandboxes]

No idea if you send uk but single mould Jake :-)

[@JakeThompson]

Thank you Pam.. Good Luck 🍀

[@kevinjensen9817]

Great video. Single mold would be amazing

[@JakeThompson]

Thank you Kevin 👍👍 Good luck

[@graemetaylor6511]

Love these moulds.. question for you.. thinking about a 3d printed former for making my own moulds.. do you think would work well?

[@JakeThompson]

Thank you.. I think it will work.. as long as it willde-mold easily.

[@jpwoodwork]

great video jake! Single Mold

[@JakeThompson]

Thanks Mate!! 👍👍

[@carldembek3494]

Love it! Single mold

[@JakeThompson]

Thank you Carl!!👍👍

[@williamstephens3466]

Would love to win either of the molds. (If I am forced to choose, I would say single) Thanks for making this opportunity possible.

[@JakeThompson]

Thank you William.. 😀👍👍

[@70chippie]

Single mould, amazing video Jake and awesome giveaway 😁😁

[@JakeThompson]

Thank you buddy!! Good luck 🍀

[@chrisgriego549]

Love the designs of the molds.

[@JakeThompson]

Thank you Chris!! 👍👍

[@rachellemongosa1953]

Another Great video Jake! You never disappoint! Why do you not have your own TV show yet? I would definitely watch it also!! Would love to win one of your block molds!! Wishing everyone who is entering The contest Good Luck!!! I’m keeping my fingers crossed for ya!!

[@JakeThompson]

Thank you Rachelle... TV show... That would be cool. 😀😀

[@SteelBladeWoodworks]

Awesome video, those blanks look amazing!!!! If my name is pulled I’d like block mold.

[@JakeThompson]

Awesome buddy!! Good luck!!

[@davescreations7793]

I enjoyed watching this video a lot

[@JakeThompson]

Thank you Dave.. I’m glad you enjoyed 👍👍

[@BennyViola]

Jake, would it be worth it to degas post pour and leave Alumilite Amazing Mold Maker in the chamber until its fully cured? Or, would any potential bubbles expand once ambient pressure is restored? thoughts?

[@JakeThompson]

I think it would over flow the forms they are in. I didn’t do anything with them and it was fine, but I think having them in the pressure pot after the pour would probably make it awesome!

[@booyaa1851]

I like the mould with the larger cavities, gives me more options

[@JakeThompson]

Awesome Buddy .. Good Luck

[@fleetswoodshop3339]

Hey my friend great video great video I'm sorry I missed the live stream I'm so so sorry buddy our set a reminder and everything. But I didn't have the time zone right. My apologies my friend and thank you thank you from Doug

[@JakeThompson]

All good my friend!! Glad you enjoyed!!

[@youngfilmmaker9622]

Great video (block mold)! Couple questions...How do you find the rigidity of your molds being that large? I noticed in your other mold video you mentioned the different numbers...would plat 45 be best? Just wouldn’t want my mold to flex too much (resulting in spilling) when transferring to my pressure pot. Also, I have the ability to degas. Would you recommend one over the other (the quick vs the 24 hour one you degas)? Thanks again Jake...such informative videos!!!

[@JakeThompson]

Thank you for watching Chris.. the blanks that came out of these are just fine.. this is a lot of silicone and more expensive to use the fast curing silicone.. This stuff is a hardness of 20 where the hardness of plat 25 is better.. the plat 25 is better for this in my opinion, but the fast cure molds work just fine.

[@kandiecandelaria3134]

Amazing and really cool

[@JakeThompson]

😀😀😀

[@ozzydeschapell3618]

Very interesting I thought the same thing when heard about this silicone that if you don't degas it you can't use it in a pressure pot.

[@JakeThompson]

The old stuff I’ve used without a pressure pot is good for fast prototypes but it leaves the cast rough.. this stuff leaves it smooth

[@juliebloomer5673]

Love the video! Single mold, please.

[@JakeThompson]

Thank you Julie!! 👍🍀

[@georgeburgoon207]

Single mold Jake. Great video!!

[@JakeThompson]

Thank you George!! 👍👍👊

[@RichardP1966]

single mold, great instructional video

[@JakeThompson]

Thank you Richard!! 👍👍

[@grumpywoodchucker]

Turned out great!!

[@JakeThompson]

Thank you 👍👍👊

[@turningtrades8583]

Very nice! Single mold for me

[@sonyhk3824]

So nice, cheers Jake 👍

[@JakeThompson]

Thank you Sony!! 👍👍

[@JerryBWagoner]

Great video! Mine has been hanging with the FedEx peeps for over 10 days, but I hope it gets here someday. Single mold please. :)

[@JakeThompson]

😀😀 Good stuff 👍👍👊

[@kellyfrenette5308]

Single mold preferred but either would be awesome ☺️

[@JakeThompson]

😀😀👍👍

[@freelancemotorsportsllc2826]

I have a couple more questions. Do you have any advice for cleaning up flashing? I also wondered if you see any lines from the leftover silicone you pour on the second mold (that drys) and the fresh silicone you mix and pour over it? If its invisible and no seam that would be great!

[@JakeThompson]

Silicone sticks to silicone, so if you do a second pour to top it off .. as long as the color is the same, you can’t tell at all.. I cut flashing off with a razor blade. Pretty easy.

[@exotictones1054]

Good stuff.never have gone to insta gram for anything.

[@JakeThompson]

Thank you.. that’s too bad that you don’t go to Instagram.

[@ericbardell496]

very interesting, all good tips, thanks single mold

[@JakeThompson]

Thank you Eric👍

[@valeriescraftyattic3337]

Hi Jake, really enjoyed your video & the blanks turned out really nice, love the metallic colours. I would like to enter your giveaway & if I was to win would love the block mold please. Thanks for all you're awesome & informative videos xx.

[@JakeThompson]

Thank you for all or your support. I appreciate it. I’m glad you enjoyed. 🍀👍

[@valeriescraftyattic3337]

@@JakeThompson You're so welcome ☺

[@biozombieactive8792]

Oh wow... I was looking up different silicone to use for mold making like last week, and now this showed up in my recommendations. Glad I didn't buy anything yet, cause that looks perfect.

[@JakeThompson]

Super cool.. glad you enjoyed!

[@HammerHead524]

Single mold would be cool!!!

[@JakeThompson]

👍👍

[@OOAK-Ireland]

what is the silicone you are using for the mould ?

[@RatedRWoodturning]

I want to try this one day. Id be after the block mold if i won

[@JakeThompson]

👍👍

[@acemaker2002]

Love your videos!

[@JakeThompson]

Thank you Stephen!! 👍👍

[@plooms1]

Love love this. I need a 4x4x12 😁

[@JakeThompson]

😀😀😀

[@plooms1]

@@JakeThompson well 4x4x11 will do... LOL do you think it can be done with alumilite products

[@Thewatson77]

Great stuff as always Jake! Single mold for me…and if I happen to win , I’d like to donate it to someone that doesn’t own any mold blanks yet. I know I would’ve loved that if it were the other way around. Thanks for the vid! 🙌🏻

[@JakeThompson]

Great attitude!! Jonathan .. That’s what I’m talking about 👍👍

[@Rob-fn1kp]

I'm a bit of a nightmare when it comes to wasting silicone- I hate doing it- I'm getting better.... but..... you adding the leftover silicone after your first pour into the second mold- hypothetically- how long do you have spare to pour the second lot of silicone over that ? whats the maximum time you'd have? 30 mins? 60 mins? THANKS!!!!!

[@JakeThompson]

Silicone will stick to silicone at any time frame.. as long as it doesn’t have mold release on it.

[@Rob-fn1kp]

@@JakeThompson thanks!!!!!!

[@WackeyWorxWorkshop]

Very nice sir!! Block mold please 🙏

[@JakeThompson]

Good stuff Matt!!

[@walshjp17]

Great review and video. Single mold.

[@JakeThompson]

Thank you John .. Good luck 🍀👍

[@jameswatson8630]

Great information, thanks. Block mold.

[@JakeThompson]

Thank you James.. Good luck 🍀

[@danej7335]

Did you use mold release for the silicone, or is the HDPE/silicone slippery enough without it? Have you used the fast silicone to duplicate something else like a flat emblem? Either you did not mention bubbles/pits, or I missed it. ;) IMO when you are making pen/turning blanks bubbles/pits in the mold are not a big deal cuz they are going to get turned out. The definitive test would be modeling and molding something that is not going to be machined or otherwise worked. BTW -- single ;) #madeittotheend !

[@JakeThompson]

Good Job!! #madeittotheend 😀 I do use mold release but the HDPE is pretty slippery anyway.. I definitely use it on the letters on the front. I have the same opinion on the turning blanks not needing to be smooth. I will be doing some molds of eyeballs here in the near future, that will be a good test. 👍👍

[@HammerHead524]

Cool stuff buddy!

[@JakeThompson]

Thanks Buddy!!

[@freelancemotorsportsllc2826]

Jake, do you think this silicone can be thickened? 20A is too soft for my application.

[@JakeThompson]

I’m not sure how thickening it would work.. I use plat 25 for my molds.. I was just showing how quick and easy this quick set mold maker is

[@freelancemotorsportsllc2826]

@@JakeThompson Thanks for your reply. I probably should have used a more descriptive word (harden). I would like something that cures quickly but be at least 40A (harder would be better). Any advice?

[@stevehougham4236]

Great video Jake...Block mold, thanks.

[@JakeThompson]

Thank you Steve!! Good luck 👍🍀

[@robertmiranda2398]

Hi Jake, great video! Detailed. Single mold, please

[@JakeThompson]

Thank you Robert 👍👍

[@jimmobley9725]

are you going to make pen mold that fit into 21/5 gal pot?

[@JakeThompson]

In the works right now.

[@TetraCNC]

Single mold, where did you get the HDPE for your forms

[@JakeThompson]

Thank you Richard.. I get it from Amazon

[@bobbyfowler7319]

Single or block. I'm easy like that be safe be cool! Beach, NC

[@JakeThompson]

Lol Thank you Bobby!! Good luck 🍀

[@fahcpa]

Nice work, my friend...Block Mold for me

[@JakeThompson]

Thank you Rick!! 👍👍

[@nywoodworx]

Great video!!! Love the molds, I’d like a single please...........can I get it in blue ???? How much for the first ones you made?? 😂😂😂🙄🙄🙄

[@JakeThompson]

You aren’t too big for a whoopin!! 😂😂