FastEddy Bearings TRX 4M Bearing Install. Step By Step

A step by step video on how to install FastEddy Bearings into you Traxxas TRX-4M.

[@s1mp13m4n]

Thank you very much. No loud music, no jibber jabber ramblings, no politics, just a great how-to. Thank you. In doing this, you showed how to disassemble and reassemble the truck. This video is a tutorial for parts swapping the entire rig. Great job.

[@roundoval9991]

Just used this video too put bearings in two new TRX4M's, thank you so much for the video, and I also appreciate you just jumping in and going for it, relieves some of my anxiety of tearing two new trucks apart!

[@brandonjones5096]

Dude, so glad to still see some videos popping up on here

[@unclepauly3205]

Super glad you started with the Trx4m in your return! Helped me out so much for a first timer

[@steph4050]

VERY VERY useful clip. I really appreciate you took the time to do this. It really helps the newbies to get around these little beast. Thanks a lot!

[@edwardknapp9522]

Hard to find the time these days. I still enjoy making them when I can

[@Tesso12]

you ever think of doing a 5th scale build again? i cant tell you how much the baja sc build series helped me! =) thank you for everything you do man!

[@tomkrushlin]

Thank you for taking the time to show us how to do it !!

[@robertferrara427]

I have bought 2 bearing kits already and just got the bronco. and probably will get this set too. nice, paced explanation, I have built about 20 kits in cars and helicopters and always like added information in a non annoying presentation, which you have here.

[@AlexNoheda]

Thank you so much for your time and patience to go through the whole proccess, much appreciated! 😊

[@appalachiancrestrailroadja6801]

Nobody’s mentioned this,but my two day old trx4m has stripped ring gear in the rear diff. I called traxxas and they will replace them under warranty with more nylon gears but it’s just going to do it again. I ordered metal gears,hopefully they will last a little longer.

[@danielkmit4145]

I love your bearing kits it’s the only bearing kit I use

[@FishHardGetLucky]

Does this video work on the high country ford version?

[@GraveDigger78]

Thanks for the video, I learned a lot

[@gartennunu21]

My servo gear broke up after three hours, I replaced it with the Traxxas metal gear and it works fine

[@colininscore1286]

45:29 of course your snaps right together no problem. I wonder what I’m doing wrong.

[@cheesychuck123]

Upon install I found my low range transmission I bought to replace the stock unit had bearings pre installed.

[@bray_boi_2227]

Are the bearing water tight sealed?

[@linou1968]

It s better than stock?

[@minortrash5062]

My 1.5 does not fit properly into the 2 screws at the end of the axles. I even tried the alien wrench supplied by Traxxas and it still spins freely. Very frustrating, not sure what to do now.

[@rickbarg3980]

The CA glue will harden the plastic and possibly break it

[@johnlujan8706]

Well done! Subscribed.

[@DarylFoster-f5p]

I'm so worried I will lose bits or not put it back together properly haha

[@Muffdaddy28]

How did u get the stripped screw out I’m having the same problem?

[@denniscornelissen731]

Hello, did you get the screw out yet. I have the same problem.

[@bluddywulf6796]

This is why I got so far with mine and then sold it. I was unimpressed with the plastic everything and bushings. We are too far along with products for this type of bs from manufacturers. The truck was ok stock ,just needed weight and better tires for crawling but it was a slab walker out of the box if you prepped the tires first. Imho it's not worth 150. Mabe 75 bucks. I had 400 into mine and it was ok....didnt really reflect what was put in it.

[@busman2050]

Just run it the way it comes don't waste money on unnecessary items

[@rickbarg3980]

Don’t forget to grease your gears

[@MellowYe77ow]

The noise gate on your microphone is set a little too high.

[@flashthunder829]

Thank you for this!

[@andyrichey1192]

You forgot to grease the gears just saying

[@busman2050]

The guy sounds asleep.

[@aaronlanger7555]

You know some time stamps would be invaluable so I don't need to watch a 50 minute clip for one bearing

[@john-lenin]

You mean “Trucksus.”

[@denniscornelissen731]

How did u get the stripped screw out I’m having the same problem?