Fatbike V20 Amsterdam

Fatbike V20 adjusting speed to maximum 45km/ph ❤️❤️❤️ Enjoy! 😊 #amsterdam #fatbike #V20 #speed

[@Elgaspa1971]

hi James, I'm Andrea from Italy,...I also have v20 pro version 3.0 2024, your tutorial is perfect and the speed unlocks without any problem!...I would like to know some more info from you on your computer board, how it can be connected to the smartphone, how it can be updated, what are the other menu items besides 4, what are they for and how are they configured to make the most of the potential of this! finally I would like to know if there is a manual that explains how it works because it wasn't delivered to me with the bicycle, and if you have it maybe in PDF if you can send it to me! let me know thanks!

[@tour2778]

I only have the v3 screen on my ouxi v8 but have no bluetooth, for other settings you also need other controller

[@jamesss1108]

Hey, thank you for this. I appreciate it ❤️ Going to post it soon ❤️

[@Elgaspa1971]

very good, I'm waiting for it....

[@Elgaspa1971]

in the meantime I'll send you what I found on the net, at the moment I haven't been able to make P02 appear, which I don't know what it's for or if it exists, and P03 and for this reason I can't increase from pas 3 to pas 5 in the display ,...I also haven't yet figured out if the display is equipped with Bluetooth to be connected to a smartphone to be updated and therefore I don't know if the H6C can be updated in the firmware!

[@Elgaspa1971]

- P01: mileage unit, 0: KM; 1: MILE. - P02: ? = I NOT HAVE THIS MENU! - P03: 0 = 1-3 Top speed 25km/h , 1 = 1-5 Top speed 45km/h The default 0 = 1-3 top speed 25km/h/Enter Password = The default password is “1111" = I NOT HAVE THIS MENU! - P04: Speed limit setting, default 25km/h Enter Password = The default password is “1111" for setting sped until 45km/h. - P05: Start mode,default : 0 0 = zero start, 1 = non-zero start I NOT UNDERSTAND WHAT IS REFERS TO AND WHATS IS DOES! - P06: Drive mode, default 2 0 = Only PAS drive 1 = Only Throttle drive 2 = PAS drive + Throttle drive，exists at the same time. If it does not have the throttle handbar you must set 0 otherwise the error E 020 will appear on the display - P07: Mileage reset + restore factory Settings, Press and hold the [+ button] 5 seconds mileage clear Press and hold the [- button] for 2 seconds to restore factory Settings. - P08: Automatic cruise , default : 0 0 = automatic cruise 1 = no automatic cruise. - P09: Change the undo password, default : 1111 Press and hold down [Power button] and [+ button], and enter the old password 1111 at ----. Press and hold down [Power button] and [+ button] at the same time, and switch to example 0000 at ---- to enter the new password. Press and hold down [Power button] and [+ button] at the same time to save and exit the password setting. - P10: Change the speed display ratio, Default = 100% then the right value is 100.

[@stefanfianen7866]

Hoi. Ik heb een fatbike v20 pro 4.0 h6c scherm. Maar ik weet nou niet hoe ik bij het code schermpje kom. Kunt u mij daarmee helpen? Want nu kan de fatbike alleen maar 25 kilometer per uur, maar ik will hen naar 45 kilometer per uur krijgen.

[@jamesss1108]

You just need to press the - and + together for 2-3seconds

[@user-su3zw2do3r]

Hello, I have a fatbike V20 Pro 5.0. I bought it yesterday. He doesn't drive more than 25 km. Do I need to change the monitor? It does not enter the settings to enter the code.

[@jamesss1108]

What monitor do you have? Same H6C display? If not need to buy it online.

[@sharfinarif3112]

Hi, Can you give the exact link from where you bought your bike v20? Thank you.

[@jamesss1108]

@@sharfinarif3112 Oh i'll try to search it but it was in dappermarkt

[@Yemeni_jeff]

Kan je nog een andere video maken ik kan niet zien waar je drukt😅

[@jamesss1108]

@@Yemeni_jeff check my new video

[@marcinwar1779]

@@jamesss1108

[@RobertoRomenken]

Is opvoeren van de v20 pro 2024 ook mogelijk??

[@ralfverheij5909]

die heb ik ook weet het niet

[@user-rq2vh8nt9c]

Ja is mogelijk ik heb de fatbike v20 pro 5dagen geleden gekocht

[@user-rq2vh8nt9c]

Alleen code 1111 werk noet

[@mckursat]

@@user-rq2vh8nt9cwat moet je dan doen kan geen codes invoeren

[@jamesss1108]

Not sure about that 😭

Hey. I buy mine yesterday also. Can you explain a bit writing in English how you set it to go faster than 25km and what are the 4 number digits 1111 that you put there

[@jamesss1108]

Hold + and - together, go to set4, press + to input the code 1111, hold the power button then you can adjust the speed already :) Stay safe 🙏

@@jamesss1108 did you had when you buy the bicycle at the beginning this error code on the left side of the screen: E 020 error

[@jamesss1108]

Didnt have any error with me check my new video

@@jamesss1108 I fixed with the error but when I get to set4 I push + but it's not writing any number 1 at all

[@marcinwar1779]

You dot show what u doing because you pointed camera in wrong direction by the time u go to that setimgs with numbers 111 . Can u please record new video.

[@AlbertDeboer-oo9vf]

Kan je een video maken dat je laat zien waar je op klikt

[@jamesss1108]

I made another video, you can see it there ❤️

[@muttekindje1]

Hoe heb je de begrenzing eraf gekregen???

[@jamesss1108]

You need to input the code 1111

[@leeroyeastside8180]

Yo hello James ik heb gisteren voor me dochter gehaalt precies de zelfde is het mogelijk om deze iets harder te laten rijden gr 👊🏽🤝🏽💪🏾

[@AllthewayupG]

Kijk wel uit maat niet te hard..

[@user-tc2oe6pp6u]

Ni verschieten da je dochter dan wat klappen krijgt als ze een ongeluk veroorzaakt he..en dat je genoeg spaargeld hebt ,want de verzekering zal niets dekken als ze een ongeluk veroorzaakt,

[@jamesss1108]

Yes, it is on the video how to increase the speed. But please stay safe 🙏

[@K.A-87]

WEET IEMAND HOE JE DAT START LICHT ERAF KRIJGT DIE AUTOMATISCH AANGAAT IN HET DONKER??????????

[@jamesss1108]

It is part of it already unless you want to change the whole front light.

[@karolinaparys3134]

Hoe de gashendel te ontgrendelen

[@jamesss1108]

My fatbike doesnt have a throttle, only pedal assist

[@santinofs]

Haha top maar hoe kom je in dat streepjes menu dan? Heb dezelfde maar hij knippert alleen 25 en daarna van alles geprobeerd…

[@veyrononyoutube9210]

Weet je het antwoord al?

[@veyrononyoutube9210]

Ik heb hetzelfde probleem

[@aminb5695]

Ik heb hetzelfd

[@ekkaphongsachomphoo7257]

Ik heb hetzelfd knipper aleen 25 kan niet verde.

[@jamesss1108]

You need to press + or - then put the code 1111

[@jacques86]

Pls how you put on screen numbers for code?

[@jamesss1108]

@@jacques86 You can use the + and - to put in the code and hold + and - together so you can go to the editing mode.

[@user-cm6oh8fs3f]

Why you don’t let see it , make a full new video mate so people can learn it .

[@jamesss1108]

@@user-cm6oh8fs3f I dont know why is the video like that, i had it captured perfectly fine but when i uploaded it, the video is different :(

[@jamesss1108]

@@user-cm6oh8fs3f check my new video

[@user-cm6oh8fs3f]

@@jamesss1108 oké

[@ayoubhalui7243]

Strijder ❤️

[@jamesss1108]

Thanks! ❤️

[@PaulTheTurkish-ny1wc]

I hope they ban these as soon as possible. Stupid and illegal, endangering other people on the road.

[@hsshhs-j6r]

go cry harder 😂😂😂😂

[@bigHT456]

They cant ban these, there are too many police wont have time to catch REAL criminals

[@jamesss1108]

Let's claim it ❤

[@RobertoRomenken]

Is opvoeren van de v20 pro 2024 ook mogelijk?

[@blubiesrl5371]

ja

[@narutoharutunian7874]

@@blubiesrl5371hoe ik heb 5.0 en dan gaat hij Gew knipperen

[@jamesss1108]

Yes it is possible

[@veyrononyoutube9210]

@@narutoharutunian7874k ook weet je hoe je dat fixt