What's the best speedcube?

[@lovedeshwal5993]

*Feliks logic* *Scramble -10 secs* *Solve - 4 secs*

[@bungacomel4199]

Lol😂

[@zaydbag7438]

Scramble is 4 secs too inspection 10 sed

[@seiraeziar8631]

wrong scramble ~4 sec inspection ~7-10 sec solve ~5-7 sec

[@phil7247]

I find it very funny how Feliks got 2 out of his 12 solves to he faster than the actual world record

[@siatsu3631]

He's legendary for everyone anywaya.

[@wjrainbow9797]

Well pretty much every single one of his Friday Four solves are a WR, sol no surprise there

[@bonerici]

Lol same

[@patakk8145]

yes, but this video proved that he can achieve the WR every few solves, which is not obvious from the weekly episodes from which we can only deduce that he gets the WR about once a week

[@elreyY299]

yeah, obviously he can get under the world record a few times, and people comparing him to Lucas... 😂bitch please Lucas only had a so fucking good luck to get this time.

[@keystonecuber9632]

Feliks gets an 8: *slams hand down on table* I get an 8: MOM I GOT A PBBBBB

[@savagecuber2801]

same

[@truscorpio13]

I'm still over here trying to get a sub 15

[@FifaPlayer-pf3uq]

+ApricotPit02 XD lol im still going for a sub 25 average

[@truscorpio13]

***** I was just practicing today and I got a sub 19 and 20 . I'm sure I'll get a sub 15 soon with just a bit more practice and another lucky solve. I have been improving though. A couple weeks ago I couldn't stop getting 27-35 seconds and now I'm getting about 26 seconds for my worst solves. I also just beat my best average of 5 with 21.534 yesterday. So I'm getting there. Hopefully in about a week or so I'll at least get a sub 16.

[@MyTwizzMyTwizzy]

Sadly enough my pb is 14.... I average sub 20 xD

[@mohdshayril9038]

Feliks : later on 2018. Me : watching this in 2018

[@thephysicistcuber175]

Dont read my comment feel old yet?

[@alexrosen8071]

The Physicist Cuber my your comment has been here for 7 hours and I’m all ready considering your comment to be old JK

[@thephysicistcuber175]

Aquatic Cuber sick, I'm reading *your* comment 7 hours after being posted

[@alexrosen8071]

The Physicist Cuber nice🙏

[@XonterYT]

same

[@gvito1]

1:06 if only he made that time at competitions

[@SplixCreates]

Fr

[@kscuber5865]

@@SplixCreates ?

[@jadenwhite3419]

@@kscuber5865 that means for real dummy

[@mommailim9616]

@@jadenwhite3419 Geez calm down sherlock.

[@GovindNadathur12]

ive never clicked on a video so fast

[@phononmusic]

i feel the same way

[@facundofunes8475]

speedclicker

[@saltbjorn]

the new rage

[@alphaomega9387]

Govind N i think he solved the cube faster than u click the video

[@awesomeguy9573]

I was about to say that +AnimeXSparts lmao

[@cebrown23]

THE ZHANCHI NOSTALGIA

[@1312_PV]

Still my main. The cube that made history ;-;

[@SteezyVlogs]

+Rubertoe its still mine too 😂😂

[@1312_PV]

It trully changed the world of speedcubes and speedcubing forever. It is the monocoque chassis and carbon fiber in racing equivalent of cubing. From them on many new cubes have been made but none has been a clear winner, cheap and apt for OH and normal solving as well as for newbies and pro solvers alike.

[@MAINFRAMELaboratories]

2:16 Yeah just got sub-5 no biggie

[@emperorzant2850]

He has a weekly playlist for Sub-5 :P

[@MAINFRAMELaboratories]

Philip Lauer Yeah I know. But you'd think that would take a little more than a couple tries

[@emperorzant2850]

CuffRox Well, Feliks certainly has practiced and committed to cubing for several years... he's setting the bar pretty high.

[@MAINFRAMELaboratories]

Philip Lauer Soon he's gonna be doing Thursday Three's I bet

[@cobydacat7564]

CuffRox yea i thought thats a world record right

[@axen2181]

1:10 Feliks no reaction wakes my mom up and breaks a window

[@bragtime1052]

Feliks, you should make a new video like this. I feel like there are a lot of new competitor cubes that have taken over the market.

[@Paints]

I can't wait to watch this in 2018

[@NarwhalFPS]

Natalia we are in 2018

[@aether1370]

2018¿

[@aussiecuber3142]

I judged you in 4x4 Final feliks, it was great!

[@aussiecuber3142]

- At Aussie nats

[@GovindNadathur12]

that's amazing

[@WrenCubes]

Aussie Cuber lucky

[@thelcuber5048]

Aussie Cuber What happened? Why are all your videos gone. ☹️

[@radyagardianpranoto2603]

When he says _2018 or so_ you get a chill

[@mdoe8]

Hello folks in 2020, nice to have you back

[@pbcuber7830]

Feliks I love how calm you talk

[@jacksoaresjr5718]

Where's the Rubik's brand?

[@daviddtrinh]

A Rubik's brand cube isn't a speedcube... Its more like a failed attempt at a speedcube.

[@imagzz4942]

I think he was kidding guys ;)

[@wjrainbow9797]

+iMagZ z What do you mean "guys

[@jacksoaresjr5718]

+iMagZ z lol someone gets it xD

[@sabelch]

Didn't Felix get an 8s solve with one in competition? (A Rubik's sponsored competition where you could only use rubik's brand cubes)

[@arecus54]

And I'm here, still liking the LingYun after all these years

[@EPICGUYDUDE]

I wish I still had one

[@coldjello]

Me an intellectual: watches in 2020

[@blackleafpg3d640]

Cold Jello im watching in 2020too

[@rexyaxy4314]

@@blackleafpg3d640 ayy same, how's the quarantine going for you guys

[@mazehew3946]

@@rexyaxy4314 let's just say I haven't solved a cube in about 5 years but now I've found my old cubes and yeah, got so bored I've learnt how to solve them all again in the past couple days

[@nihalsameer6417]

Hey! me too, I am watching in 2020, the best cubes have changed so this video is old...

[@Sevonarola]

Lol same

[@vinnie6205]

You made heaps of unofficial world records in this video. Your just too good👍

[@ResuelveloTu]

You are the best of the best ever definitively...

[@lenurple2945]

weilong gts or gans air?

[@fzemdegs]

Depends on your turning style and desired characteristics of a cube.

[@lenurple2945]

yeah I guess I'll follow your advice and just try other cubes until I find what I want. For now I'll stick with my Thunderclap!

[@lenurple2945]

obligatory OMG

[@geogamer3126]

+Feliks Zemdegs what is your main?

[@enriqueibarra8340]

didnt you watch the video.

[@akhcubing]

Gan is my favorite. It fits my turning style. I use Gan 249 v2 M, Gan 356 air SM, and Gan 460 M.

[@ashaydwivedi420]

WuQue is so much better. Even J Perm agrees

[@FastCubeMaster]

Don't you think the WeiLong GTS is worthy enough for that list? I think it's an upgrade from the yuexiao.

[@supertommy6422]

I reckon YueXiao is better than Weilong GTS

[@supertommy6422]

+Ethan585790 I have both of them, either my weilong GTS is faulty, or you facts are wrong? YueXiao corner cuts better for me

[@supertommy6422]

+Ethan585790 yea

[@supertommy6422]

+Ethan585790 Weilong GTS is my close second too, really the only difference I find between the two is that the Weilong GTS just rarely fails a corner cut and locks a bit, but I haven't failed a corner cut in a solve before up to now. :)

[@supertommy6422]

+SuperTommy64 or maybe I set up my GTS wrong XD

[@handle0158]

0:40 HOW DID YOU KNOW???

[@supercoolmunkee]

Bruh, I am watching this in 2020

[@tofu3661]

@@supercoolmunkee me too

[@datboi0669]

I don't get it???

[@benjastuff1347]

IM WATCHING THIS IN 2021

[@Anthony-wo9qp]

0:39 HOW DID HE KNOW?!?!?!?!?!

[@julius6005]

magic bro, magic

[@georgesukanto6219]

@@julius6005 yez

[@caioellery9117]

Yah

[@scorpse6244]

@@julius6005Even the floating laptop said for himself

[@Babyboss65]

My main is the Gans 356 Air. I really like Ganspuzzles, so I had to order it. On the day I got it I broke all my PBs. I am now more averaging like 16 seconds, a lot faster than 17.5 seconds as I did on the 356 S. My PB ao5 got down by 1.2 seconds and my single got down by 1.8. I also got a sub-16 ao12. I don't think I will ever change my main again.

[@emperorzant2850]

Idk, sometimes just setting up a cube right can make it better than a current one (this is from experience, and from a fellow Gan enthusiast).

[@quietducks1149]

YO HOW DID YOU GET 2018 STRAIGHT OFF THE BAT

[@amarm.m.5968]

he didn't get me I am from 2019 😎😎😎😎😎

[@deedonhulu9721]

Amar M.M. I am from 2020😎

[@saharsh4419]

@@deedonhulu9721 I am from 2021 😎😎😎😎😎😎😎😎😎😎

[@deedonhulu9721]

@@saharsh4419 i’m here😹

[@Isaistr8]

ik Feliks won't reply but just In case... will you show your Rubiks cu e collection

[@radiostation6366]

He doesn't really have much of a collection (especially for the worlds best cuber) at least from what I've seen. It looks like just a bunch of each wca event, but I could be wrong.

[@truscorpio13]

Felik's isn't really one to collect different cubes. Like Cubie said, he mainly does speedcubing so that's what he practices on. Unlike RedKB, he is still a speed cuber but isn't nearly as fast. This is probably because he spends so much time with strange looking cubes like a 3x3x4 or something that they don't use in a competition. Felik's is about competition. Although I'm sure he has a couple strange cubes.

[@Isaistr8]

+Cubie Cuber does he even have 8x8

[@radiostation6366]

+FightZombie 22 I have no idea, but I do agree with apricot about that he is about competition, and doesn't really collect much

[@Isaistr8]

+Cubie Cuber yeah

[@mrme433]

Felix I have a question how do you feel about a Dayan zhanchi compared to uhm idk like an xmen tornado. Which would you choose for a competition

[@TheTwistyCuber]

His turning style is SO NEAT

[@royvivat113]

Who else is watching in 2018

[@thephysicistcuber175]

Roy Vivat I feel old

[@germancubesolveryolo4524]

2019😎

[@Awesomeness-ee4rc]

2019

[@Hannah-xc4rl]

2019...

[@parmjitsingh2504]

2020

[@user-vd8et2ow3d]

That 4.58

[@fawami]

Feliks: Uh, this is as of 2016 so if you are watching this video a while after this, 2018 or so Me: **watches in 2019**

[@ardavvpp]

2020*

[@spooderdan9127]

@@ardavvpp 9 months later

[@justintai879]

The power of Feliks made the laptop float

[@mapesofpv9819]

You got me into rubix's cubes/magic cubes

[@tchop6839]

Any one else noticed he broke the WR- he got 4:58

[@TNTflames]

T Chop its not official

[@ksok715]

TNTflames yeah im suprised he wasnt pissed at that point

[@cobydacat7564]

T Chop yea he was just like world record well i dont care

[@bberriesissimpconfirmed5684]

T Chop no at 1:09

[@purplekitty-minecraftmore1819]

Jonashitthemup 734...... He meant that was the *TIME* he got, not what time it was during the video

[@MathijsHerremans]

I was out of cubing for a few years, a lot has changed inside the community. I'm still cubing with the DaYan ZhanChi. Are the cubes now a big difference? What would you recommend me for a cube.

[@nathanbegel4505]

If anyone still has the same question as you 5 years ago: yes it's a big improvement especially because of magnets. As of 2023 I believe the best cubes are the RS3M Super (very cheap and flagship performance), the Xman tornado V3 (My favourite, very high performance and amazing feel), and the Weilong v9/YS3M. Gan flagship are good but 80$ is just unreasonable given how good other cheaper cubes are

[@kota69420]

You know the drill 1:Valk 3 2:Gans 473 3:Moyu Weilong GTS 4:Moyu Hualong 5:Gans Rubik 6:Thunder Clap 7:Yuxin 3x3 8:Moyu Aolong V2 9:Rubiks Edit:0:Cyclone Boys

[@shrek8781]

Rubiks :(

[@AnilSoni-ch9xb]

IS QIYI thunderclap is good?

[@taverasabogadosconsultores3364]

we want the gans zemdegs

[@raphashakalaka9357]

Feliks what's your main??😐😜

[@raphashakalaka9357]

And by the way I'm asking this half through the video....😐😜

[@joeytarnowski6018]

+Rapha Magic Gans air

[@raphashakalaka9357]

+Joey Tarnowski OK,THANKS!!😜

[@mooncake9862]

Who’s watching in 2019?

[@jaydenhpiano5600]

try speed cube on a normal rubiks... because them damn non cubers keep complaining that im not using the official rubiks so its "technically not solving the rubiks cube" you know how hard it is to turn those rubiks cubes

[@mattevans1643]

After tensioning it and making it not super tight, i was able to corner cut at about 30°. Thise cubes are trash. But they are nastalgic.

[@jpx8341]

Thanks to the KZbin algorithm that brought me back here, to my good old days

[@myvideos9839]

Which is the best cube for 40 dollars between gan ,moyu ,qiyi and da yan magnetic cubes ???

[@MaxiOfficial]

Ahora entiendo por que eres el mejor del mundo... ;)

[@Stewy-]

yeah but he got a 4.58 on the 356s v2 so it's the best one!!!1

[@fzemdegs]

Makes sense!

[@Bl4ckinferno178]

Preach!!!!1111!!

[@heat3622]

#logic

[@GrahamSiggins]

That 4.58 was effed though #realtalk

[@Stewy-]

+Cube-alig yeah that 0.96 ZBLL was a nice touch

[@conalstewart5596]

1:11 he got faster than the world record

[@rodrigohuetefernandez-brav7314]

Thank you Feliks, this video has been very helpful for me.

[@CrispDZN]

I swear you broke the world record more than once in that video

[@yafi2475]

I am new to cubing and I am sub 50. My cube is really bad so I want to buy a speed cube. So which one will be better? As I am new I don't have any certain style or preference.

[@emperorzant2850]

QiYi Thunderclap. It's only $8, you can buy off TheCubicle.us. It's currently the best cube for its price, and is very flexible for turning style preferences. Give it a try!

[@yafi2475]

Philip Lauer Thanks for the advice. I was also thinking about Thunderclap

[@saltbjorn]

try a not so fast one at first - if you go for like an aolong or a gans then it'll just be too fast for you. guanlongs are very cheap and pretty quick so go there - it's like $6 or something

[@emperorzant2850]

Thomas The Racer GuanLongs are not good cubes, and Thunderclaps are very controllable by nature--perfect for beginners and advanced cubers alike. GuanLongs are really badly designed, I recommend against getting one.

[@saltbjorn]

Philip Lauer guanlongs aren't great but they're a good cheap starting point and i already had one but i lost it

[@paper2222]

-Felix- Feliks, is Moyu good for speedcubing?

[@iamrni248]

How did he know its 2018!!!

[@gabrielbowman1267]

Hey feliks thank u for the awesome review especially towards the gan cubes!!

[@wardednickel2552]

I wish you still made videos like this

[@EricGallant24]

What is a modern speed cube that feels like the zhanchi but is better?

[@emperorzant2850]

Zhanchi is pretty tight and blocky, so not too many cubes feel like it. Maybe the MoYu TangLong or Gans 357?

[@EricGallant24]

Philip Lauer What i'm looking for is something smooth and fast like my Zhanchi but with less popping and better corer cutting but still controllable

[@emperorzant2850]

eric Gallant If you're willing to put enough time into setting this cube up properly, I'd recommend getting a QiYi Thunderclap v1. It's everything you describe except smooth out of the box (it feels more crunchy), but you can break it in and lube it specifically to make it more smooth with something like Lubicle Silk. If you want that feeling out of the box, though: the newer Gans cubes (356 v2 and Air) are smooth, don't really pop, control very well, and corner cut very well. The choice is yours!

[@EricGallant24]

Philip Lauer thanks alot ill do some more research and ill get back to you if i buy any of the ones you recomended😁

[@DamianS78]

eric Gallant just buy a dayan zhanchi 2017

[@iqbalhakim2658]

2019??

[@pjmcuber4878]

Whats better gans air or valk 3?

[@fzemdegs]

It's different from person to person, that's the point of this video.

[@tlfypbyqtlfypbyq4469]

+Feliks Zemdegs Is the Gans air fast? Because I prefer faster cubes.

[@user-jv8mg9gi2s]

+tlfypbyq tlfypbyq did you even read the comment that he posted on this very thread?

[@tlfypbyqtlfypbyq4469]

He said it's different from person to person. He didn't say if it's fast.

[@user-jv8mg9gi2s]

tlfypbyq tlfypbyq "Fast" is also a quality that differs from person to person..

[@abdulhamidtomal5204]

Thanks Feliks Zemdegs😄. It helped me a lot!

[@thebullseyebandits]

Personally the YAN3 is my favorite cube, based on feeling, mine has never locked up even thought I have sort of a rough turning style, so I really am comfortable with it

[@rounok3061]

Anyone in 2018

[@加波かなみ]

I watched it at 2018

[@1000subscriberswithoutanyvideo]

valk 3😎😎😎

[@aadil-alihamir5986]

are you going to do a part 2 2020 edition of this. there is so much debate about the best speed cube these days (gan x,gan xs, gts 3m etc)

[@DivnoorCubes]

This embodies the greatest wisdom

[@yaej]

did he set an unofficial wr?

[@fzemdegs]

+GMD PizzaDerp it was at the time :)

[@fzemdegs]

+GMD PizzaDerp it was at the time :)

[@albandetouche1913]

feliks use goguan yuxeiao for the oh

[@신수겸-n9u]

Feliks Zemdegs what's your favorite cube?

[@Ferotiq]

Feliks Zemdegs hi

[@philbarry7979]

who's seeing this in 2018?

[@MixSillyMax123456789SBO]

2018

[@xac39]

Feliks you made me wanna start solving a rubiks cube when i saw you solve one in 4.73 seconds i was "wow that was so fast" now i can only solve one in 60 seconds

[@karna5998]

Feliks zemdegs predicted that I'm watching in 2018

[@edwin_pig]

Who's watching in 2023?

[@ben1996123]

wew i use a guanlong

[@bagel168]

Your profile pic matches that perfectly

[@EPSKRCMPK]

+Alex Lu looool

[@familyryu3547]

ben1996123 lololol

[@OortCloud]

ben1996123 guanlongs suck!!!!!

[@redhunter408]

which cube would you use if gans is not sponsoring you?

[@fzemdegs]

+Sounak Mukherjee a Gans Air, haha

[@redhunter408]

Gans air or valk3

[@cobydacat7564]

Sounak Mukherjee did you get a world record on one of them you got like 4.5 isnt that a record

[@Wow-gd3vc]

Its Not A Record Unless Its In Competition

[@Samuel_536]

KJRWARWET 123 no you have to be In a comp to break a wr so the delegates know the solve wasn't fake. I am not saying the solve was fake tho

[@ishtarxdd]

Feliks, I'm from the future. Cubes have changed massively. There's a new gan model. Called the 356x. they also made a budget gan called the 356r. It costs 16$ but everyone knows it sucks. We are expecting the gan air sm 2019. Good luck in 2016! Love, future guy.

[@DiegueteLoquendo]

[Cube Noises] Jaja i love thats subtitles xD

[@superhelixdrew6213]

Lol I’m watching this in 2018. Cubes are outdated 😂

[@martindamasin8669]

They are still good

[@calebyao.]

Eveyrone knows Dayan Zhanchi is outdated

[@sanchbs250]

2019!

[@sweepy9198]

@@hiruno1697 I dont know if you're british or australian but that was the most australianist thing ever 😂

[@jirikadlec9388]

In 2020, they're outdated more XDDDD

[@trentonhamilton3891]

You got a 4.5. That's a record

[@emperorzant2850]

The solve was unofficial, so he didn't break any world record. Official world record single is 4.73 by Feliks Zemdegs, and Feliks' unofficial PB is 3.52 seconds.

[@thejcb8]

Feliks’ current PB is now 3.01 seconds

[@evelyncubes]

Correct term of a wr at home is sub-WR

[@romie.m]

Guys I really need help. I want a speed cube that is great and that isn't up to $15 on amazon otherwise I can't afford. If someone has some advice or suggestions I would be glad because I really wanna improve my pb since I have a speed cube that sucks because it's actually a really bad quality cube. (I'm sub 35 rn)

[@yzlee1423]

Romie M. Qi Yi Thunderclap.

[@romie.m]

Lee Yu Zhe Thanks :) I think I will buy the thunderclap soon

[@koopa643]

Romie M. thunderclap 100%

[@romie.m]

koopagameri Thanks :)

[@jmountain6691]

I use a guaguan and it works awesome for me

[@kaimingyao4662]

oh,I love gan's cube.Thy are really good!

[@krisiaction]

Feliks what do you thing Gan 356S V2 or Gan 357

[@TheDesiDragon]

I hope that the Yangchen Yan 3x3 and the MoFang Jiaoshi MF3RS are good cubes. They are fairly cheap, and I bought them to start to get better times and transition from an ordinary Rubik's brand cube. I used a worn-out Gans cube that my friend showed me, and it was amazing. I get why many people like Feliks use them as their main, as it is so controllable, and the circular center makes for great corner cutting.

[@Kameronjaye]

Your my favorite speed cuber

[@ethanhonest9206]

I wasn't even paying attention to the reviews i was just watching u solve

[@Midgentics]

Hey, I watch ur videos so I decided to subscribe to u. Thanks a lot for making the videos!😃😃😃

[@G7Beats]

i know its really old but the aolong v2 is just so perfect for me!

[@adelmarounkhalil2516]

What speed cube method do you use and who did you learn your first beginner method from

[@martydospel1625]

Can you do a cube collection video?

[@benjaminvanderhoff7101]

Hi can you make an update on this video please? Thx! And BTW congrats on new wr!!!

[@presentfigure92yearago89]

Can you make a video of all the speed cubes and which one is best?

[@Miner8600]

I was going to comment this guy should be the world record holder for the cube, but noticed that he is 😂😂

[@purerandomness5101]

Is there a specific way you set up the different GANS cubes or do you set them up the same? How do you set them up? Could you upload a video like Kevin Hays did for how to set up a 6x6 only you do one for a 3x3?

[@InfernalZeus]

How'd you compare yuxin little magic. A lot say its like the gans air

[@T4nm4y]

How do you have your Zhanchi set up? I have one and I like it loose but it keeps popping :/ Also, thoughts between Gans Air and Valk, I quite like my friends YueXiao. I'm also planning to try out a magnet mod on the Zhanchi 😂

[@Tokyo_Pessi]

do you prefer stickered or stickerless? and if stickered, which is your preferred fitting?

[@SaneTheBro]

You actually TURNED the 357 DURING INSPECTION

[@Talinbene]

Hi Felik, I want to buy a high quality speed cube that I will have for a while. I am looking at the Gan 365 Air Advance but I am afraid the stickers will peel and it will become annoying. Do they peel? What do you think I should get?

[@shahanshahpolonium]

i use qiyi sail3 and i avg 28 seconds and my pb is 8.2sec(seriously) with du yusheng's wr scramble but i have screwed it up and it pops out too much and is kinda tight. can sum1 tell what to do?

[@genericusername4206]

ПОЛОНИYM ГАМИНГ OП thé screws might be uneven. stretch the cube on the left and right sides and see if they spread apart the same. try it with all the sides if they are uneven make the screws the same another thing, the screws could be too tight/loose

[@shahanshahpolonium]

@@genericusername4206 thanks but now its okay, and BTW how the heck did you manage to find my comment

[@genericusername4206]

ПОЛОНИYM ГАМИНГ OП i sort comments by new

[@genericusername4206]

ПОЛОНИYM ГАМИНГ OП top comments are boring

[@shahanshahpolonium]

@@genericusername4206 still dude this is like 3 months old

[@NotPofkp]

i am very proud to be an australian like you, Feliks.

[@xposeRanger]

What timer do you use for solving?

[@genericusername4206]

IceBlitz BS cstimer

[@calebyao.]

qqtimer

[@jacksmith6169]

That guy just unofficially broke the world record