Troubleshooting Your Downstream Injector: Why It Won't Suck Bleach

[@shender944]

This video is a hidden gem absolutely the best one I’ve seen on down stream injectors since it’s the first one I’ve come across giving details on tip size importance

[@1slan550]

I really appreciate this video just starting out with the pressure washing thanks

[@kkutube1972]

I have been using it but never understood it, thank. Can you point me your video taking it completely apart and reassembling if available, thanks.

[@j.d.williams6882]

Great video, this is going to help a lot of newer washers. I had to replace a hose a few months ago for the same thing you explained. Cheers

[@wingedfoot198]

How do you choose the right Down stream injector? They are sometimes stamped with number such as 1.8 or 2.3. Which one will give you higher chemical mix? Thanks.

[@Medomsley]

Great videos Jason, keep them coming! Got to ask when is the long goatee coming back again? Was always a great look.

[@dramslife]

Great video sir! I had a question regarding sealing concrete. When sealing should you clean the concrete normally with a post treatment and then apply the sealant? I did some testing and the SH seemed to make the sealant turn a little milky. Not sure if it was concrete temp or my post treatment was too hot. Thanks!!

[@kingofpressurewash]

Yes, I would not put a SH down after you clean it and before you seal it. Because it's gonna cause your problems.

[@papintoodeep]

My fixed chemical injector is shooting water out like unloader. Will it cause damage to my pressure washer.or do i just slap a pressure tube on it and call it my unloader?????

[@MedinasProWashSolutions]

Thanks for this video. I am still currently trying to figure out why my setup won’t pull chem through injector. I’ve checked the injector spring and ball, changed it, manipulated the loader (I have a pressure gauge so I can see the pressure changing on the outlet of the machine)… I just cannot get it… I’m going to try another Jrod next

[@kingofpressurewash]

Will it pull with no gun on it?

[@MedinasProWashSolutions]

So i put the downstream hose inside a big clear bowl and I took the whipline off of the hose reel… I started the machine and the injector pulled all the liquid out of the Tupperware bowl with the whipline not tied into the hose reel. I put the whipline back on the hose reel and no luck. Also, sometimes I have liquid flowing backwards and OUT of the nipple of the downstream injector. It’s a real pain in the butt why I can’t get this thing to work properly

[@tyriceholliday4151]

Just got into DS I stared off using a 2.5 gpm for practice. I brought the correct DS for the 2.5. I made sure it’s flowing with the water. When I place it into the bucket with water on and psi not attached THERES FLOW I can see the soap water flowing and bucket going down. when I attach the psi hose there is still flow from the bucket to the DS into the hose. Once I attach the gun to the hose no flow. this is all while the washer is off. There’s no flow with the. I removed the tip and still no flow from the bucket. Yes the water has been on all the time I’m thinking it’s the gun but here’s the kicker I added a ball valve and there’s still no flow. I’m confused

[@EliteWashServicesLLC]

Thanks for the info! Pretty new soft wash business here. Elite Wash Services LLC in Indiana

[@brosiahshowdoi3765]

Thanks!

[@kingofpressurewash]

Thank you for taking the time to watch and comment!

[@BradDePriest-o9v]

What about when your injector won’t stop sucking chemical?

[@AmericasFavoriteLawnBoy]

Awesome

[@kingofpressurewash]

Your support means the world to me!