A great video Richard, you certainly pack a lot into your videos, covering a myriad of topics, brilliant stuff as always. Cheers, Julian
@onnomulder97753 жыл бұрын
Very nice update Richard!! Cheers Onno.
@stmichaelshill74213 жыл бұрын
Thanks Onno! I really appreciate the support! Hope you're well mate.
@DudleyCentral3 жыл бұрын
Nice update Richard, the 37 sounds immense! Joe
@medwaymodelrailway71293 жыл бұрын
Like the new video.Keep it up.
@stmichaelshill74213 жыл бұрын
Thanks very much Dave!
@Pennington_TMD3 жыл бұрын
Excellent! This has to be one of my favourite KZbin channels .
@stmichaelshill74213 жыл бұрын
Thanks so much! Really lovely to hear that!
@ModelTrainOutsider3 жыл бұрын
Very interesting/cool update, Richard. A bit of a stroll down Memory Lane with some firsts and more to see. Sorry about the class 60, but nice to see the Class 37 is coming along! Anyhow, always great to get an update from the Hill! Cheers and best wishes!
@stmichaelshill74213 жыл бұрын
Hi mate! Yeah, always good to go down memory lane! I managed to sort the class 60 last night, needed quite a lot of work in the end! Bit disappointing to have to do it but main thing is it's all sorted!
@davestrains68163 жыл бұрын
Great update, you have been really busy. Thanks for sharing. Dave
@stmichaelshill74213 жыл бұрын
Cheers Dave! Hope you're well mate.
@charlie18723 жыл бұрын
Great video. I enjoyed seeing your stock, tge storage boxes and I have similar however they are 12x12 and can hold seven or eight locis; they really help to deal with the original box storage problem as you describe. I liked your trees and have made some myself by picking dead flowers from the garden, spraying with adhesive/hairspray and applying various flock. One thing I need to do is add putty or tape to the trunk. The skips and boxes look good, I have taken to try scratch building instead of buying as living in Toronto becomes an expensive proposition in terms of postage. Your 3D components look great and this brings another level of excitement to the community. I have a printer; it prints ABS and I have printed buffer stops successfully although I am thinking of changing to the resin type which I think printed your components, a bit more clean up required but they do provide a great level of detail. My layout is DC and I am too far in to change now. It would require selling mist of my collection, keeping those locos which could be converted, do all tge wiring which could be a nightmare etc. I’ve subscribed and look forward to seeing more of what you are up to. Cheers
@stmichaelshill74213 жыл бұрын
Really glad that you enjoyed the video Charlie and thanks for subscribing. Having the storage boxes really helps, looking forward to getting the original ones up in the loft ASAP. 3D printing is really a game changing I think - in 5-10 years I think things will be even more impressive! Lots of people still swear by DC and I've seen some stunning layouts operated on DC!
@moorlandmodelrailwayandy3 жыл бұрын
Another very informative update. Really like the weathering that you do on your stock. The class 37 sounds awesome atb Andy
@stmichaelshill74213 жыл бұрын
Thanks Andy! I really like the sound of the 37!
@AndyHudson-ModelRailwayBuilds3 жыл бұрын
Nice update Richard, SMS look great once you paint them and weather them, it makes all the difference Andy
@stmichaelshill74213 жыл бұрын
Yeah they are really nice kits - looking forward to getting them painted up.
@penjunction3 жыл бұрын
Great update id be interested in the bachmann nuclear flask wagon number 21 thx again
@stmichaelshill74213 жыл бұрын
Ideally I'd look to sell it all together if I do, but I'm open to splitting it. Drop me an email to stmichaelshilltrains@gmail.com if you're interested.
@tail_lamp75383 жыл бұрын
Great update Richard, you're working on some nice stock. I may be wrong but I didn't think the Hornby 60 had any screws to hold the body on? Hopefully you'll find the reason for the motor bogie being so loose.
@stmichaelshill74213 жыл бұрын
You're right! I actually fixed it last night, the whole bogie was ruined. I had to basically re-build half of the bogie frame from plasticard. The body wouldn't sit right because at some point some one had put some heat-shrink under the light pick ups to get a better contact, but it had gone hard and so wouldn't allow the body to clip into place. All fixed now and I've detailed one of the ends. Interestingly there seems to be two slightly different toolings, the accessories from 60070 didn't fit 60007 and vice versa.
@gerardburton37413 жыл бұрын
For the wheels, Why do you not just replace them. Far cheaper than replacing them. The coach you think is a Mk1 is actually a 57ft Stanier LMS brake. I do not think they were ever used in South Wales. But with a bit of imagination I am sure that you could find a reason for it being their. Part of a heritage train perhaps.
@stmichaelshill74213 жыл бұрын
Hi Gerard. Not quite sure what you mean by this mate.
@gerardburton37413 жыл бұрын
Hi, You talked about the Lima parcels van and the TA tankers in the video that the wheels were running on the chairs and that you may sell them. Just thought it would be more cost efficient to buy better wheels. Unless the cost of the etchings you also mentioned for the tanks made it too expensive to do them all. At 5.50 in the video you show a maroon carriage that you thought was a Mk1. As I said it is not a Mk1 but a 57ft Stanier LMS brake. It think you are doing a wonderful job with this layout, Good luck with it in the future.
@NicholassTrainChannel3 жыл бұрын
Nice update Richard will there be any videos about your first ever loco so the class 58 will you restor it and have it running on your layout? Cheers and all the best. Nicholas.
@stmichaelshill74213 жыл бұрын
Hi Nicholas. The 58 runs fine, could be hardwired but I don't think I will do that. It doesn't fit in my period that I'm modelling. So I'm just going to keep it safe and sound!
@ferrotranspor77142 жыл бұрын
hello friend I subscribe to your channel I find it very interesting and emotional 🎞️🎥👌
@russellbenton29873 жыл бұрын
That’s not a Mk1 it’s a Stanier coach . Good video
@stmichaelshill74213 жыл бұрын
Ah good to know! Thanks!
@whiteroseBR3 жыл бұрын
Beat me to it
@andrewsartorius73502 жыл бұрын
Hi mate how's your layout coming alone haven't seen anything in agies hope your well
@ChrisHamblypopsidelad3 жыл бұрын
I’d be interested in your flask set?!
@stmichaelshill74213 жыл бұрын
Hi Chris - drop me an email at stmichaelshilltrains@gmail.com
@ChrisHamblypopsidelad3 жыл бұрын
@@stmichaelshill7421 done ✅
@Cheadleridgelanetmd3 жыл бұрын
Where did you get the foam??
@stmichaelshill74213 жыл бұрын
I got it from Jon Burman - really good stuff
@Cheadleridgelanetmd3 жыл бұрын
@@stmichaelshill7421 do you have a link ?
@stmichaelshill74213 жыл бұрын
@@Cheadleridgelanetmd He doesn't have a website - was just given his number a few years ago