FedEx MD-11 Papercraft

[@backfischtvhd5156]

Right in Time! I just finished cutting mine half an hour ago

[@bingbong608]

Cool!

[@Aerocraft-mq1rn]

Finally! I wanted to see this for soo long! Nice job. Seems that this model took a lot of time and effort!

[@bingbong608]

Thanks! What will your next model be?

[@Aerocraft-mq1rn]

My next model wont be till spring break because I am moving now to chicago!

[@bingbong608]

Wow! That sounds exciting!

[@Aerocraft-mq1rn]

It is! I hope to continue making paper models there. Have you thought about your next model?

[@bingbong608]

I am almost done with a Delta Airlines L-1011. I just need to finish the landing gear.

[@JPYamremVlogs]

Nice work!, There is a fact of it: FedEx flight 14 was a scheduled cargo flight from Singapore to Newark, New Jersey, via Malaysia, Taiwan, and Alaska. On July 31, 1997, the aircraft flying this route crashed during landing on its final segment at Newark International Airport (EWR), inverting and catching fire, injuring all five people on board and FedEx flight 80 was a scheduled cargo flight from Guangzhou Baiyun International Airport in the People's Republic of China, to Narita International Airport in Narita, Chiba Prefecture (near Tokyo), Japan. On March 23, 2009, the McDonnell Douglas MD-11F (N526FE) operating the flight crashed at 6:48 am JST (21:48 UTC, March 22), while attempting a landing on Runway 34L in gusty wind conditions. The aircraft became destabilized at flare and touchdown resulting in an unrecovered "bounced" landing with structural failure of the landing gear and airframe, and came to rest off the runway, inverted, and burning fiercely. The captain and first officer, the jet's only occupants, were both killed.

[@swisschocolat001]

Flight14 pilots didnt die on flight 80 they did

[@Paper2322]

I have a 120 grs. Paper Opalina. It is strong enough to build the wings?

[@dyland618]

Bing Bong, I have a request. On Hermercraft's channel it has a Hawaiian airlines a330. Is there a way he can change it to pdf or you? Possibly you could email him?

[@bingbong608]

Sorry for the late reply, but I've been really busy lately as the school year is coming to a close. I'll look in to it when I have time, and I'll let you know.

[@dyland618]

Okay! Take your time I understand. ☺

[@bingbong608]

I've gotten the PDF files. Would you like me to email them to you?

[@dyland618]

Yes! Thank you very much my email is [e-mail]

[@dyland618]

I'm making the model to display in my room

[@daniellalydia9578]

Oh yaaaaaaaaaaaaaaaaaaaaaaaaaaaaas FedEx

[@someairplane2666]

Nice, and what's the music?

[@daniellalydia9578]

FedEx 🥺🙏

[@pilbo_winklater]

WOW still amazing

[@bingbong608]

Thanks! Are you still planning to upload your videos? If you are having trouble uploading, Maybe I could help you.

[@emilygriffiths6654]

how do you get the instructions

[@contactsatyam]

Will you creat a new vedio or not

[@ThatAustralianBall]

i built that too

[@wantanmen]

This is a Google translation. I will excuse myself in Japanese because I do not understand English. It is beautifully made. I am looking for a paper craft of DC-9 MD-80 MD-90 Boeing 717. 英語が分からないので日本語で失礼します。 綺麗に出来てますね。 私は、DC-9 MD-80 MD-90 ボーイング717のペーパークラフトを探しています。

[@bingbong608]

Hi, I have a video of a Hawaiian Airlines 717. Here is the link: kzbin.info/www/bejne/iqGXopluhdWoZrM You can download it for free at papermodelers.com as long as you are a registered member. I don't have any videos of any of the other planes that you have mentioned, but you can buy a DC-9 papercraft here: www.skylinepapermodels.com/products/172-scale-airliners-medium I hope this helps!

[@wantanmen]

This is a Google translation. Reply Thank you very much. You have already registered your great channel. Paper Modelers has also been registered. It is collecting an aircraft that can be said to be an ancestor of ARJ 21 made in China. Thank you very much again. これは、グーグル翻訳です。 返信どうもありがとうございます。 あなたの素晴らしいチャンネルは、既に登録しています。 Paper Modelersも登録済みです。 中国製ARJ21の、祖先とも言える機体をコレクションしているのです。 改めてどうもありがとう。

[@bingbong608]

You are very welcome.

[@Paper2322]

​@@bingbong608DC 9 cost to buy? Aww i wanted to do or repaint to Aeromexico one 😅

[@someairplane2666]

No formers???

[@SNC9]

I like fedex livery！ But, in Japan I cannot see much…… I want to go to Memphis int’l airport once!!!

[@bingbong608]

Nice, I usually see FedEx MD-11s at Newark and John F. Kennedy.

[@soundwave2120]

I saw a FedEx DC-10 fly over my head once I can tell becuase it didn’t have winglets

[@BoeingMAXGhanni-nx8co]

The sound 737 MAX☺️☺️☺️

[@camnhungvo9295]

❤🎉😊

[@gabrieleduardoraabalmeida802]

Qual será a próxima miniatura papercraft

[@bingbong608]

The next papercraft will be the Lockheed L-1011-500 in Delta livery. It should be uploaded in early 2018.

[@russianpapercraft7984]

Bing Bong wow O-O you have already done it?

[@bingbong608]

I have finished most of it, just the engines and gear are not yet completed. I will most likely finish before winter break is over.

[@russianpapercraft7984]

Bing Bong Good news for us:). I recently have finished 737-800 and I`m gonna post video today too. P.s Will you gloss your Lockheed?

[@bingbong608]

Unfortunately, no. I have tried using the technique of putting a thin layer of glue over the models before building and spraying the models after completion, but I can never get a proper result where the glue and gloss go on properly without ruining the model. However, I have recently gotten a new printer that is much better than my old one so I can try using glossy paper on my papercraft Concorde that I will be making after the Lockheed.

[@genrest8041]

I’m almost done building mine. I made a video about it. edit: im finally done lol

[@bingbong608]

Nice, I checked out your video!

[@genrest8041]

Thanks!

[@bingbong608]

No problem, I liked and subbed!

[@genrest8041]

Thanks!

[@soundwave2120]

Document password please

[@gayaraaukwaththa9170]

Sub to this poor person hardly made this 🙂

[@dyland618]

I made one and it's huge! Great for display

[@dyland618]

2 feet long to be exact!

[@bingbong608]

Nice!

[@747heavyboeing3]

I built a 1 48 PSA Boeing 727 3D design paper model. This MD 11 should be an easy build.

[@BombilloTD]

very nice model; and i like your wood floor design.

[@evanndrofreitas6114]

Senha

[@dyland618]

By the way bing bong, I'm kind of new to papercraft. Do you have any tips to making the nose of the plane

[@bingbong608]

The nose of this plane is pretty tricky to make. First, I folded and glued the nose into the correct shape as shown in 00:2, then, I folded the tip of the nose into the correct shape and put a drop of glue into the inside of the nose. After it dried, I added another drop. This will form the nose into the correct shape, and the part will be very strong.

[@dyland618]

Thank you for the advice!

[@dyland618]

I am making a Boeing VC-25 Air Force one model right now. Any other tips?

[@dyland618]

Oh and also!! Will my papercraft look better if I coat it with clear glue and then put mod podge gloss on it?

[@bingbong608]

Yes, it can make your model look glossier, but I have not had any experience with this. I'd suggest you watch some other KZbinrs like Hermercraft who show how they gloss their models.

[@alsaif3386]

I’m out of words this is spectacular and you have a new subscriber which is me

[@bingbong608]

Thank you!

[@BYMARTIN_pbs]

On the minute 2:28, where did you got the treadwheel thing? Please.

[@bingbong608]

If you're talking about the rims, I just took those from the paper-replika A330: paper-replika.com/index.php/airliner/airbus-a330-343x-cebu-pacific?start=1

[@dyland618]

SUBBED!!

[@bingbong608]

Thank you!

[@russianpapercraft7984]

Hi do you need ATR 72 American eagle ?

[@bingbong608]

I'd love it if you could send it to me if it is a free model. If it is paid, please don't feel like you have to send it to me. I don't want you to do anything illegal.

[@Chop._.]

wow good

[@bingbong608]

Thanks!

[@TSKALEX876]

what song is this

[@hmlsch.2388]

I’m going to make a video of this plane, my first one on a different account. But the ink goes green and dusty when I put glue on. How do I fix this？I just want to say the md 11 and l-1011 are my favourite planes so pls dont say i copied u. Cheers, I'm only a child using my mums account.

[@bingbong608]

Sorry for the late reply, make sure to use thick photo paper and don't apply too much glue to the glue strips.

[@mariebcfhs9491]

this reminds me of the Narita accident when a FedEx MD-11 landed with a boeing boeing boeing and turned upside down before catching fire barbecuing all 2 pilots

[@bingbong608]

Yeah, there were a lot of similar accidents, like FedEx Express Flight 14, FedEx Express Flight 80, and China Airlines flight 642.

[@mariebcfhs9491]

boeing boeing boeing

[@mariebcfhs9491]

It's notoriously hard to control when landing, because the plane is longer than the DC-10 and they keep the same horizontal stabilizer& elevator so in order for the elevator to have enough force to control the plane they have to land at a faster speed than most airliners. This results in a lot of bouncing around on the runway and the pilots tend to over-correct the bounce by pushing the nose down, stressing the main landing gears and when they break something very nasty will happen. The problem is after such a huge number of accidents involving the MD-11 they NEVER seem to improve it leading to further more accidents.

[@ihatechinese_]

Kênh toàn là mô hình tàu đây đúng ko

[@KoolKidCG12]

ultimate paper plane

[@joaquinvincent1169]

wow cool 👍

[@AviTheWolf]

What kind of paper to use,printing or other

[@bingbong608]

I use Canon 170 GSM matte photo paper.

[@vickyharianto9505]

Wow

[@russianpapercraft7984]

Wow! Great job! Keep up!

[@bingbong608]

Thank you!

[@russianpapercraft7984]

Bing Bong you are welcome

[@genrest8041]

Where do you get the landing gear templates?

[@bingbong608]

Most if the landing gear is on the template. However, I got the rims of the tires from the A330. Here is the link: paper-replika.com/index.php?option=com_docman&task=doc_download&gid=811&Itemid=200093 The instructions for the MD-11 landing gear are here: paper-replika.com/index.php?option=com_content&view=article&id=9583&limitstart=1

[@genrest8041]

Thanks. I was always looking for the rims, nice vid btw

[@bingbong608]

Thanks, and glad to help!