Much respect! That is a lot of hard work! Please be careful. Hello from NC
@mikep78103 ай бұрын
Thank you
@jayrobert59173 ай бұрын
@@mikep7810what about a bale cutter, cut the bale in half? Would that help any, just a thought.
@dembeckfarms3 ай бұрын
Necessity is the mother of invention, came out good
@mikep78103 ай бұрын
Thank you. I think it will be good until a tmr mixer arrives
@danielglaus20643 ай бұрын
Sorry ware did you get that round bale unrouler from
@kevinwallace47513 ай бұрын
Good video Mike. The cows dont seem to be complaining, so its all good buddy👍
@mikep78103 ай бұрын
Thank you Kevin. Cows love the baleage
@Zeke-yv3nw3 ай бұрын
Great job Mike! Do what you have to do until you can make things better.
@mikep78103 ай бұрын
Thank you, and that's true
@michaelmonthey59743 ай бұрын
There’s nothing that satisfies me more than giving the cows beautiful hay.
@mikep78103 ай бұрын
A beautiful site indeed
@Blueriverfarms3 ай бұрын
Thank you for the video Mike. I think your proposed set up for handling round bales; being a temporary TMR gap set up is working fine until the farm is able to obtain a TMR mixer.
@mikep78103 ай бұрын
Thank you. I think it will be a good stop gap
@scottsargent85643 ай бұрын
Thumbs up Mike your plan is coming together one step at a time.
@mikep78103 ай бұрын
Thank you Scott. Slowly but surely
@Adam-n1i1z3 ай бұрын
Hey Mike just a little advice if you plan on putting baleage in your Tmr once you get one get a round baler with a precutter. A vertical Tmr will process long hay but it will wear out significantly faster.
@mikep78103 ай бұрын
Thanks Adam
@carloscordova69343 ай бұрын
Amazing work mike greeting from burley Idaho
@mikep78103 ай бұрын
Thank you Carlos
@miwilia3 ай бұрын
This video reminds me just how hard work farming is.
@mikep78103 ай бұрын
It sure is
@genechronister70853 ай бұрын
Another great vid!
@mikep78103 ай бұрын
Thank you Gene
@mennoreuten15633 ай бұрын
Hey Mike, just thinking out of the box, switch the youngstock to the old barn and the milking cows to the heiferbarn make some freestall of it and find a used milkingparlor, there comes a time youre dad will take a step back so prepare for that moment, that is what is comming to my mind but like i sad just some thinking no offense,thanks and greetings from a Dutch dairyfarmer
@mikep78103 ай бұрын
Maybe some day
@anthonyhengst29083 ай бұрын
Whatever works best for, go with it. Seems like a pretty good system for you. I think probably the same way we would do it too essentially. At least until we can find a better way.
@mikep78103 ай бұрын
I hear that
@rogerhenry28703 ай бұрын
Mike I might suggest that you try a rissler unwrapping cart we have had one for at least eighteen years and it is still going and I don't know how we ever got along without it
@mikep78103 ай бұрын
I mentioned the Rissler cart at the end of the video and why it wont work. It would be fine going down the front of the cows but I wouldn't be able to get it from one side to the other
@dennistembreull27183 ай бұрын
Hey Mike love your videos. What is the name brand name of your bale unroller. Would like to get one
@mikep78103 ай бұрын
Thank you Dennis. That is a worksaver bale unroller.
@tonymckeage10283 ай бұрын
Great Video Mike, your shed systems remind me of my dads system in the 1960's BUT at that time Cows were 100% grass fed, if you want i can share some NZ You Tube Channels, Please don't hate me!
@mikep78103 ай бұрын
Sounds good Tony. Always good to see different set ups
@frankdeegan89743 ай бұрын
A wet warm winter and spring wil require some gravel near the barn area leding to the barn door and the unrolling area,
@mikep78103 ай бұрын
There is a construction outfit up the road that I already spoke to about getting some of the gravel
@donniethebeau-dr1qp3 ай бұрын
Hi Mike this is Donnie Thebeau 😅 I used to be a former myself whenever I was younger I never deal with round bales of hay I used to use the square Vols what is more easier to use on cattle the round bail or the square Bell I have always used square bales because it's easier to pick up
@mikep78103 ай бұрын
Hi Donnie. We still have square bales. That's still the easiest to feed in our barn. Getting the round baler has allowed us to get the hay baled up quicker and also allowed us to go to baleage
@antonyfarming3 ай бұрын
Good job seems to work OK What u going to do with old plastic wrap ? Is there anyone around there to recycle it
@mikep78103 ай бұрын
I'm looking in to see what other neighbors do with it
@billcampbell29433 ай бұрын
U work with what u have available good stuff
@mikep78103 ай бұрын
Thank you Bill. You're right, work with what you got
@jameschapman69083 ай бұрын
I wondered if you could unroll them in the Manger. Probably isn't enough room and they're to heavy to move by hand. Looks like you need to put down some concrete in front of the door. ( in your spare time lol)
@mikep78103 ай бұрын
You probably could but getting the bale over to the other side would be an issue plus what do you do with the roll when you unroll it to the other end
@jameschapman69083 ай бұрын
I thought maybe turn it around and roll it back the other way. Or build a 100 cow freestyle with a center feed alley.
@JjDay-id7vr3 ай бұрын
Time think about expanding and build freestyle barn and robot
@mikep78103 ай бұрын
Its been time to think about that for a while now
@MorganOtt-ne1qj3 ай бұрын
Can you just spear the bale, and save the time of switching from the hugger to the unroller? Just a thought from a lazy guy.😯
@mikep78103 ай бұрын
You could but could knock over the pile. Most of the time the hugger is on the loader anyway so its not a big deal
@bradreynolds66983 ай бұрын
What town are you in or nearby just curious
@mikep78103 ай бұрын
Not too far from Cortland
@brysonhaggard3 ай бұрын
Know that you've seen how the bales do with feeding would you got knives in the baler if it was do to over
@mikep78103 ай бұрын
I'd consider it
@johnhenderson2993 ай бұрын
Great feeding concept just needs some fine tuning
@mikep78103 ай бұрын
Thanks John
@codymccauly3493 ай бұрын
Hi Mike I'm not going to watch the video tonight if that's okay butt but I got a little vacation tomorrow I'm going to the hotel tomorrow I probably want your video this week not tonight I know this message is going to be long ok😊
@mikep78103 ай бұрын
Awesome
@codymccauly3493 ай бұрын
@@mikep7810 happy 4th July Mike
@jeffyurek43423 ай бұрын
I know it’s easy for me to say but would a big square baler have worked better.
@mikep78103 ай бұрын
They both have their advantages but I like the decision we made to go with a round baler