Feelworld F5 - The 4K DSLR Monitor - Setup & Review!

[@carlosalbertopalacioamado8742]

The dummy battery would work with the Canon 6D and the Ferlwordl 5.5 Pro monitor. Thank you very much for your comments and congratulations on your excellent video.

[@giandjo]

Thanks for this video! It was very helpful!

[@dmitryabolmasov4676]

Can you please tell me how I can activate the option in the menu to show information about the camera display (about the recording, whether it is running and about the battery and SD card capacity)? It is displayed for one second and then goes out

[@pixlygifts6226]

Excellent real life review.. Thank you!

[@hugh.munguzs]

I don't understand. The DC port clearly labeled 'Input', but it is sending power out to the camera dummy battery?

[@ALEJA_Studios]

Great video and thanks for the insight. Did you turn off the camera display for the external monitor or you can't have both running simultaneously?

[@TrendingReviews]

Hey Bola, thanks for the comment. Yes, you can have both screens on at the same, not a problem!

[@iyushfilms7058]

@@TrendingReviews I have the same monitor, how do you display it on both screens?

[@keonnathomas1349]

Can you explain how did you select the histogram. I know where it is located but how do you select it to be on screen? What button did you press to select histogram?

[@MaadhyamPhotography]

Sir my sony np 750 batteries only last about 20 min...by adjusting backlit to 35 it goes upto 45min..hows your smaller battery giving 3.5 hrs. I am also not using dummy battery for sony

[@bombvisuals5171]

after u insert the dummy power will also produce sound as well as video im having trouble with sound from my feelworld monitor s55

[@carlosalbertopalacioamado8742]

If I connect a power bank to the monitor, will this also serve to feed the fake battery? Thank you very much for your comments

[@sharree5673]

If I have a HDMI wire do I still need the dummy battery to connect with my camera screen?

[@TrendingReviews]

Yes. HDMI doesn’t provide any power, you still need a power source, i.e. Battery

[@MHDIMN]

It seems like 1080 resolution would result in cropped display on the screen. 4K resolution would fill the screen entirely without any crop. Such a bummer. Reviewing photos and videos would fill the screen, but the Live View would be super cropped.

[@rjaymolina]

Correct. It’s not terrible though as the display is still big enough for you to see what you’re doing, and way better than using the on camera display

[@jeepurz57]

Great vid, plenty of volume and easy to understand for a novice. Thanks!

[@kylenichols6838]

Is the dummy battery required for proper operation or can you just use the battery pack and be okay?

[@TrendingReviews]

Battery Pack is used to power the Monitor, but I use the Dummy battery to connect & power the camera using the Feelworld Monitor.

[@cafeundergroundshow]

​@TrendingReviews I don't think you answered the question.... you I use my camera battery to power my camera? And use a separate battery pack for the monitor. Is this possible? Or will it only work the way you have it connected?

[@caseyonlocation8257]

Hi again, one more question please? Might you have a recommendation for a 12 volt cable connecting to a USB-C or USB-A port on an external battery pack? I was checking out various 12 volt cables on Amazon and found it confusing for all the many sizes available. I also wasn't sure if this will work due to 5 volts versus 12 volts specified on various cables. I am currently able to use a USB-C cable into the USB-C DC port to power the monitor, but I also want to try a 12 volt cable as well. Thanks!

[@TrendingReviews]

Hi mate - Just so I get it right, you mean you want to connect a Powerbank that has a USB-C/A port, and use this to power the Feelworld device, rather than a RAVPower battery attached directly to the Monitor - is that correct?

[@caseyonlocation8257]

​@@TrendingReviews Howdy. Yes, correct. I currently already am able to power the FeelWorld monitor using an external Anker 20,000 mAh battery pack using a USB-C to USB-A cable, so that works well. I'm curious to also try powering the monitor via the 12 volt port with some type of cable connected to the Anker battery. I'm not trying to power together at same time via 12 volt port and USB-C port. I just want to figure out how to power the monitor via the 12 volt port but I'm confused trying to find the correct 12 volt cable with the other end going to either USB-C or USB-A. On Amazon there is a perplexing variety of different 12 volt cables. Might you have a link you can provide for the correct 12 volt cable that will work for above scenario?

[@takeachance182]

Why is my f5 monitor displaying my image cropped and not full screen? Is it because I’m shooting in 4K? Or can I change it?

[@TrendingReviews]

I noticed that it gets full screen when I switch to 1080p instead of 4k, but that shouldn't be the case since its a 4k monitor. There could be something in your settings of your monitor or your camera that changes output to full screen

[@rebeccam4093]

I have a Fuji TX-3. Which battery pack would I get?

[@darrellreesejr]

When i record a video then try to play it back in the monitor it switches to 480p.. any help with this?

[@gilmeralex]

Same happened to me, i think is the HDMI, but i'm not sure

[@darrellreesejr]

@@gilmeralex I figured it out. It was the tv connection setting in my camera. You can switch it to 1080p

[@castelofotografiacreatingm4043]

Hello, I need your help! I have the same Sony camera as yours and the same FW568 monitor, but when I connect the camera to the monitor, there is no signal at the monitor, only the blue screen and the "no signal" message How did you set up your camera to show the image on the screen?

[@TrendingReviews]

Hi! Just a few questions for me to diagnose and see if I can help: 1. Do you have a dummy battery connected to the camera and the monitor? 2. Is your camera set on Movie mode? 3. In your Camera settings, can you check to see Proxy Recording is set to off? www.sony.co.uk/electronics/support/articles/00120915 / helpguide.sony.net/ilc/1710/v1/en/contents/TP0001667428.html

[@thenationrecords95]

I have the vx 870 and everytime I try to record 4k on my camera it goes to a blank screen how can I fix this ?

[@Phatboy414]

my camera settings and controls arent showing up on the monitor

[@frankyklevz5202]

When you play back dose it show on the monitor too

[@simonholland8500]

I have 2 problems with this; I am confused what I need to buy for power. The HDMI cable, does not connect to my Nikon D5300, the mini HDMI cable end does not fit in my camera port, the port is too small. I don't want to use the dummy battery, that would make it easy to snap the battery cover. I have a cable mini HDMI on both ends, my Nikon D5300 does have that mort, would that work? TIA

[@CassieDePecol]

Same issue

[@caseyonlocation8257]

Thanks for your video, thumbs up! I'm puzzled about one thing if you might have an answer. My new FeelWorld F5 5.5" 4K monitor has a "volume" control. But I hear no sound coming out of the monitor when I play back a video. I only hear sound coming out from the camcorder external speaker, nothing from the monitor. I made sure to unplug any cables from the camera's mic-in port and headphone-in port, but still no sound coming out of the monitor. This should be a simple no brainer thing. Any clues?

[@TrendingReviews]

Hey Casey - thanks for the comment and feedback! Oh, yours has a Volume control? Mine doesn't - Are you sure they sent you the F5 model, because the F5's for sure are not specced to have in-built speakers. As far as I'm aware, only the FW279 series only have in-built speakers.

[@caseyonlocation8257]

@@TrendingReviews Thanks @Trending Reviews for your reply, much appreciated! I was mistaken. I assumed the monitor has a built-in speaker because it has volume control. In fact, it only has a 3.5mm AUX port at the bottom that can be used to hear sound with headphones. I didn't notice the 3.5mm AUX port because the included L bracket mount is obstructing the view and access for both the 3.5mm AUX port and the USB-C DC power port. The 3.5mm AUX port does in fact work for sound when plugged into with wired headphones. The one thing that annoys me the most is that the USB-C DC power port is also blocked by the included L bracket when attaching the monitor to the L swivel bracket on a camera hotshoe. I think this is a poor design on FeelWorld's part, otherwise I'm liking the F5 5.5" touch screen monitor quite a bit. I ended up ordering a right angle USB-C cable that will hopefully work while using the supplied L bracket with the monitor on top of my Canon Vixia G60 camcorder's front "cold"-shoe. I want to use that USB-C port for powering the monitor with an external rechargeable USB power pack, such as a 20,000 mAh battery pack. I tested this and it works great, versus using my Sony batteries that will die in a couple/few hours. Do you ever use the USB-C port for external power? Or do you use the 12 volt port? Or simply use rechargeable Sony (or Canon?) batteries? Here's the right angle USB-C cable I ordered, hopefully this short 1.5" cable will fit into into the USB-C port while attached to the L bracket, link here: amzn.to/3kWjB1q AND here's the Anker 20,000 mAh rechargeable battery pack I'm using: amzn.to/371Guvp

[@da33ie]

Hi. When you connect the hdmi cable, does the image automatically appear on the monitor, or do i need to configure it thru monitor first...an if so...how? Please Cheers

[@carlosalbertopalacioamado8742]

excuse me but in the canon 6d I would have to put a battery with the fake battery thanks

[@simonholland8500]

Hey mate; I bought this monitor after seeing your video, but when I plug in the cable, the screen stays blue...I got the batteries charged on the back and everything, can you help me? Simon

[@TrendingReviews]

Hey Simon - Not sure why its staying Blue, without knowing how you've connected it. What camera, what HDMI port, which settings?

[@simonholland8500]

@@TrendingReviews I got one of the cables online to connect the nikon DS5300 mini HDMI to the monitor HDMI - the cable connects to the right places...

[@elpoderdelaoracion777]

3 to 4 hours?

[@dabidabidoo]

So if you use this with a canon camera, you need a different battery pack to power the monitor?

[@dabidabidoo]

And will this work with just the dummy battery? Or do you need the battery pack and dummy battery?

[@TrendingReviews]

You can use the same battery pack for the monitor as I've mentioned, irrespective of what camera you have. However, you will need to get the dummy battery specific to your camera, so for your case, a Canon one. And to have this setup work, yes, you will need both of those things. Hope that helps!

[@dabidabidoo]

Thanks a lot, man! It sure helped! More power!

[@TrendingReviews]

Anytime buddy!

[@alfiejhowells1751]

Hi how do I get the both screens to work and how do I make the video fill the whole screens? Thanks

[@TrendingReviews]

Go into your camera's menu and find the setting called: Proxy Recording. Make sure this is set to OFF, then you will have both screens work at the same time.

[@alfiejhowells1751]

Thank you so much

[@jonymatiagubca17]

So I can't see my camerascreen on the monitor if I'm ONLY using a HDMI Cable?

[@oneiros7314]

i’m confused about this too

[@cristiantorres305]

Hi there ! Good video ! I have the same monitor, I use it with a Sony a 6000. I have an issue, this monitor turns off suddenly when I’m recording 😢 would you be kind to tell me why ? Thanks so much ! ps.- I just subscribed 🙂💪

[@TrendingReviews]

Hi! Thanks for the comment and the sub! I've not come across the issue where it turns off during recording before. Maybe a faulty HDMI cable? How are you powering the monitor?

[@cristiantorres305]

@@TrendingReviews thanks for answering! I’m using the same HDMI cable that came with the monitor. I am using Rav Power Batteries. Thanks again !

[@jamesbaldwin1132]

@@cristiantorres305 I just got this and have the same problem, your comment was from a year ago so maybe if u fixed the issue you could tell me how?! Thank you

[@aydenjmellion7056]

Is there volume????

[@israrhussainaquarius]

It has only side mounting holes but does not have mounting hole in the bottom, and also not having touch screen 😏

[@jessdegruyter]

Does it work of you shoot 120 fps ?

[@edwardfenyesgyorgy265]

it depends on your camera capability, not the monitor... my Sony A6400 can output only 60 fps maximum, but a Sony A7S3 can output 120 because it has a full HDMI connector plug-in, while A6400 has only a micro HDMI connector - I hope I could help you

[@jessdegruyter]

@@edwardfenyesgyorgy265 thanks Edward. It works fine!

[@Real.Pain.]

@@edwardfenyesgyorgy265 can you explain? Do you mean with the a6400 if you playback the video on the monitor and you recorded 120FPS it doesn’t work ?

[@edwardfenyesgyorgy265]

@@Real.Pain. I never tried playback, I know that A6400 can do send out only maximum 60fps signal via the micro-hdmi... I wanted to shoot a wedding with 120 fps when the couple walks in and it could not display it

[@Real.Pain.]

Ohh damn usually what I film sports videos I only film in 120 fps. I’m looking for a Monitor now but I guess it would be smarter not to even get one now. Thanks for telling me that ! Enjoy your day.

[@muddabuwshi6510]

is the screen really that cropped??

[@TrendingReviews]

In that resolution, yes. It's dependent on the camera settings as well as monitor settings. There is also an option to zoom in the frame of the screen to fill it.

[@muddabuwshi6510]

@@TrendingReviews Thanks!!

[@Leotardoification]

The live view on the monitor is not full screen and seems to be virtually the same dize as on the camera monitor. Seems kinda pointless tbh

[@manalihunters1007]

Good vro

[@carmenmedina9030]

Great informative video, Thank you!

[@bastienpiallier]

Hi , I try record video in 4k but the screen become black how can I fix that

[@TrendingReviews]

Have you taken a look at screen settings on this device?

[@bastienpiallier]

Trending Reviews I found it was because I have proxy on in my camera

[@TheSouroti]

@@bastienpiallier Hello friend, did you find the settings for the screen, for the 4k projection without a black screen..Please I have the same problem, do you have a solution?

[@bastienpiallier]

@@TheSouroti yes the solution is you have to turn off the record proxies on your sony