Felix probably crafted his entire house with a Swiss Army knife.
@FelixImmler4 жыл бұрын
This is the topic for the next video😂
@SCCIT-jq6jh4 жыл бұрын
I did mine with a Randall.
@jurajg82484 жыл бұрын
@@FelixImmler I wondered how it would go with the rangergrip 79? Will you try? :D Thx ;)
@utharkruna11164 жыл бұрын
😂😂😂
@jakubfator55623 жыл бұрын
😅😂 That's excellent comment!!!
@monkeythe1st4 жыл бұрын
Right there is the difference between a good Swiss Army knife and a Chinese knockoff.
@FelixImmler4 жыл бұрын
I agree!
@moundain42203 жыл бұрын
Anything made in china
@jonasandersson73673 жыл бұрын
@@moundain4220 is awesome considering how little you paid for it*
@moundain42203 жыл бұрын
@@jonasandersson7367 Now theyre actually getting expwnsive too
@jonasandersson73673 жыл бұрын
@@moundain4220it's you guys getting poor I'm afraid
@iluvusomuch12704 жыл бұрын
Bro you a legend, you use a Swiss Army knife in ways that seem impossible like I think you could straight make a house if you wanted with just a Swiss Army knife. Good job bro
@stevebettany87784 жыл бұрын
That was a tremendous effort I’ve seen a shrink cup before but not made with such limited tools. Very impressive.
@FelixImmler4 жыл бұрын
Thanks a lot!
@cellerfeller14747 ай бұрын
I spent 25 years hand carving wooden spoons and kitchen goods for a living. I always carved green wood then dried it gently in a simple light bulb kiln. This was just a basic wooden plywood box with a top lined with foil insulation - wire rack at the top of the box - 4 standard shop light bulbs. If I wanted to slow the process I could unscrew one or two bulbs - moisture escaped through the gaps around the lid. It was a very basic setup but worked perfectly. You could tell when the wood was dry by the feel - warmth coming from the wood and by the sound when you knocked two pieces gently together.
@theflyinggearman31284 жыл бұрын
Best brand ambassador ever :-)
@scottjohnson6764 жыл бұрын
Wow, great video demonstrating patience and determination. Didn't know so much can be done with one tool. This is taking bushcraft to the next level. This is the first video of yours that I've seen. I will be checking out your other videos. Thanks for your hard work.
@FelixImmler4 жыл бұрын
Hello Scott. Thanks a lot for your valuable support!
@stevedriscoll25393 жыл бұрын
I wouldn't have believed it, but I saw it with my own eyes. Sir, you are extraordinary! And you have a delightful personality...extremely relaxing and entertaining video 👍👍👍👍👍👍👍👍
@FelixImmler3 жыл бұрын
Wow, thank you for this wonderful feedback!
@OdeeOz4 жыл бұрын
I have several styles of Victorinox pocket knives. Fisherman, and the one you show here, are my two favorites, and I always keep one or the other in my pocket. 3:57 I would have used saw to cut several times toward what I want thickness of cup to be. Then used blade like chisel, down tree rings. Much quicker with locking blade that way.
@dennisleighton28122 жыл бұрын
Same here! 👍
@impermanenthuman8427 Жыл бұрын
What is the model he is showing here?
@bostaffarts3 ай бұрын
Wow. Das ist in diesem Jahr meine wohl persönlich beste Kanal-Entdeckung. Selten so viel gelernt rund um das Schweizer Messer. Mir war dies bis dahin nicht bewusst wie dieses Tool einem in einer vielleicht möglichen Not-Situation gute Dienste leisten kann. Alleine schon die anschaulichen Erklärungen mit den beiden zu vernähenden Musterteilen einfach klasse. Ähnlich wie bereits in dem Video wo es um das schärfen der Schere gegangen war. Eine tolle und wichtige Erklärung die das Scherschneiden behandelt und worauf man hier unbedingt achten muss. Ich freue mich schon wenn mein erstes Victorinox die Woche eintrifft. Vielen Dank für diese tollen Videos.
@SidJ83003 жыл бұрын
Thank you for sharing. You really demonstrated the capabilities of this blade .. subscribed
@FelixImmler3 жыл бұрын
Thanks for the sub!
@WayPointSurvival4 жыл бұрын
I really like it, my friend! I have been waiting for this video and I was not disappointed! Thank you for all your efforts in bringing these excellent how-to videos to us. All the best, James.
@FelixImmler4 жыл бұрын
Thank you so much James for this wonderful feedback!
@WayPointSurvival4 жыл бұрын
@@FelixImmler You are welcome!
@samvereecke32133 жыл бұрын
this guy, what a hero, a lot of skills and something between Ray Mears and Mr.Bean
@FelixImmler3 жыл бұрын
Haaa ha haa i prefere the comparison with Ray!
@josercarlucci4 жыл бұрын
Hi Felix, interesting technique, I just hope the parts fit and you get dry! Thanks for the video!
@FelixImmler4 жыл бұрын
Thank you my friend, I hope so too!
@jayman6905 Жыл бұрын
A hard piece of work, but great piece of work and great carving skills
@levinskki38254 жыл бұрын
I always find myself shouting „Hello Felix“ in your intro😅 Mach wiiter so, Felix! Bisch eifach de Hammer.
@FelixImmler4 жыл бұрын
Haa ha haa, dankä Levin!
@AdirondackAmerican4 жыл бұрын
Very clever way to seal the cup. Awesome 😎
@FelixImmler4 жыл бұрын
Thanks a lot for your feedback!
@liveonthesun33684 жыл бұрын
Thank you Mr Felix. Your videos are much much appreciated and enjoyed
@FelixImmler4 жыл бұрын
Ohhh, thank you so much!!
@nomadicafrica4 жыл бұрын
This guy just puts a smile on my face!
@FelixImmler4 жыл бұрын
Thanks a lot!
@jeffreyoldham554 жыл бұрын
"Persistent" That's the best word to describe our friend, Felix. We shall see you two weeks, and drink a toast to you with your fully sealed cup! 🤤 👍
@FelixImmler4 жыл бұрын
Next friday comes a Q&A video to the shrink cup
@2greeksandacamera3 жыл бұрын
This is really interesting! Thank you !
@FelixImmler3 жыл бұрын
Glad you enjoyed it!
@micaelalves68044 жыл бұрын
The only thing I was thinking through the video was “where I can find a nice jacket like that”
@FelixImmler4 жыл бұрын
Oh, this is a cheap supermarket jacket from Aldi.
@dr.rajasaurusandunclebonec65264 жыл бұрын
Use the Dragon balls to make a wish!
@havers243 жыл бұрын
www.amazon.de/-/en/TACVASEN-Softshell-Waterproof-Military-Multi-Zip/dp/B085C6J6Q6/ref=sr_1_8?dchild=1&keywords=tacvasen&qid=1610307479&sr=8-8 pretty sure this Is what Aldi copied but super tough and comfortable jackets and protective hiking gear..
@StartledPancake62123 жыл бұрын
@@FelixImmler You find one off things there that are amazing sometimes. Most things are cheap junk but a few that are amazing for 10 euros...
@johnnygunz23004 жыл бұрын
You bring me peace and knowledge.... Thank you.
@FelixImmler4 жыл бұрын
Thanks a lot Johnny!
@jasonp43852 жыл бұрын
This guy is the coolest! I like his videos
@daverichards65572 жыл бұрын
I’m speechless. Truly amazing talent. Bagsy him on my team Please!
@FelixImmler2 жыл бұрын
Thanks a lot Dave!
@emremat334 жыл бұрын
this man able to make an entire civilization with a swisschamp.
@harrier61773 жыл бұрын
I'm going to try and make one when I get the chance. It was a good video.
@FelixImmler3 жыл бұрын
Thanks a lot Kira!
@monaangeloutdoors5142 жыл бұрын
So cool !!! Thank you I love your videos ! Some great projects !
@FelixImmler2 жыл бұрын
Hello Mona. Thanks a lot for your compliment!
@andipianotchr4 жыл бұрын
I bet that cup will be absolutely perfect once the bottom swells, then dries. In fact....would love to see it again in a guest appearance in another video 2 or 3 weeks from now😊🔥
@Bananeisafree Жыл бұрын
I guess while waiting for the wood to shrink you can seal the bottom of the cup with a bit of molten wax. (if you need to drink RIGHT AWAY !!!!) Great video, thank you for your work
@SedDelMar3 жыл бұрын
Great job! Gratitudes to you for your expert instruction!
@FelixImmler3 жыл бұрын
Many thanks!
@richardrudy2834 Жыл бұрын
Awesome job felix,enjoyed the video very much.
@FelixImmler Жыл бұрын
Thanks a lot Richard!
@brighgeal81173 жыл бұрын
probably one of the coolest things I've seen
@FelixImmler3 жыл бұрын
Thank you so much for this compliment!
@ronin60164 жыл бұрын
Hallo Felix mein freund das war ein gute projekt was zeigt an viele tips, und Ihre lacht, sehr toll, vielen dank für großartig video - Daniel
@FelixImmler4 жыл бұрын
Vielen dank lieber Daniel. Deine Kommentare in Deutsch sind toll!
@masgiver2 жыл бұрын
It's 'crazy', you use SAK to make shrink pot. High respect
@irondoger3 жыл бұрын
How fun it would be to go camping for a week with you 🙏 Just think of all the things to learn and teach.🪓🪵🔥🙏
@FelixImmler3 жыл бұрын
Thank yiu so much for this wonderful compliment!
@Andrei-co5qq4 жыл бұрын
Great job! Greetings from Belarus and thanks for discovering new capabilities of Swiss Army Knife in such a positive way! What if you try to make a cup half of the size without drilling the second hole? The water-tightness will not be the issue then.
@bacon814 жыл бұрын
Really enjoy your videos. I have learned a lot. But can you start including the model of SAK you are using in each video? Thanks ✌🏽
@FelixImmler4 жыл бұрын
Yes..in this Video i used a Huntsman
@bacon814 жыл бұрын
Felix Immler vuelen Dank 😁
@ninjakabukibu3 жыл бұрын
Hello! It was a pleasure to watch this video and i liked your happiness. So nice that I might finally have a use for all of my Swiss army blades. 👍 looking forward to learning from you.
@FelixImmler3 жыл бұрын
Thank you so much for your wonderful feedback!
@hemidart72 жыл бұрын
It's good to mention that the bottom piece of wood is already dry helps with a better tight seal
@FelixImmler2 жыл бұрын
Thanks for your hint!!
@frankstallone38874 жыл бұрын
Felix, you are the Bob Ross of Swiss Army Knives.
@rometroy4203 жыл бұрын
You could use tree Sap from fir tree or Pine, warm it up around a fire or use your body heat and stick it around the bottom, let cool, instant seal. :) Great video btw
@svenmencke94 жыл бұрын
Wenn ich Dich nicht schon abonniert hätte, ich würde glatt wieder tun. Wie wäre es mal mit einem Vogelfutterhaus, nur mit dem SAK geschnitzt?
@FelixImmler4 жыл бұрын
Tolle Idee, Dankschön!!!
@earthsciteach2 жыл бұрын
This man straight up carved a mug with only a Swiss Army Knife.
@MeyersCTR3 жыл бұрын
I watched the hole thing! Hello from Alabama!
@finneas_f_finneas33934 жыл бұрын
felix, maybe you can add some choco glue to the bottom to fix the problem....also the glue is natural .that would be perfect.
@FelixImmler4 жыл бұрын
wowww, i never heard about. Thanks a lot for this inspiration!
@bigbilllasalle4 жыл бұрын
Great job !!!
@FelixImmler4 жыл бұрын
Thanks a lot!
@dabomb55053 жыл бұрын
Madonna- Snapped into the groove.
@markdouglas41394 жыл бұрын
Wow, that was amazing, subscribed!!
@FelixImmler4 жыл бұрын
Thanks a lot!
@nicolanicola10674 жыл бұрын
Fantastic...very fantastic...
@alexzay96374 жыл бұрын
Good cup for pencil👍✏✏✏
@FelixImmler4 жыл бұрын
😁 Thank you Alex!
@markcummings68563 жыл бұрын
Fantastic video.
@berndwagner95404 жыл бұрын
Klasse Felix! Ich liebe Deine Videos und Deine Bücher!😀👍
@FelixImmler4 жыл бұрын
Vielen Dank lieber Bernd!
@gbro19884 жыл бұрын
Another awesome video
@marioernestogodoy42244 жыл бұрын
Nice job and thank for teach
@survivalmike4 жыл бұрын
Felix mein Freund. Ist ja mal wieder ein richtiges Projekt geworden deine Inkontinente Tasse. Schaut aber super aus und das Ingenieurswissen mit dem Boden.....ich bin gespannt auf das Video in 2-3wochen. 😋😋😋 Lass knacken alter Schnitzmeister Lg Mike
@FelixImmler4 жыл бұрын
Warum sollte die Tasse dicht sein, wenn's untenrum...😂 😂
You are a wizard with that knife. Nasa should give you a job and you can carve them a new shuttle.
@joseluisdagar2 жыл бұрын
Increible, enhorabuena
@abhimanyusheoran8983 жыл бұрын
Salute u immler ....from india
@eatmelily2 жыл бұрын
That would have taken me at least 1 week, and it would not have came out that good, LOL......Thank you For a Great Video..
@FelixImmler2 жыл бұрын
Thanks for watching!
@pueblodove4 жыл бұрын
Impressive!
@FelixImmler4 жыл бұрын
Thank you!
@Downeastwaves3 жыл бұрын
Nice cup!
@FelixImmler3 жыл бұрын
Thanks!
@remb96144 жыл бұрын
First I start with the reamer then I work my way up using various drill bits.
@richardross72194 жыл бұрын
Another good video. I am really curious about the corner joints of the logs. In 50 years of enjoying log cabins in the US, I don't recall ever seeing joints like that. Is the building yours? Happy Holidays and a Healthy New Year to you and your loved ones. Good Luck, Rick
@Mario-he9db4 жыл бұрын
8:56 schindelimacher felix😂
@FelixImmler4 жыл бұрын
Haa ha haa, ja genau!
@michelerendine28303 жыл бұрын
Sei un artista😊
@FelixImmler3 жыл бұрын
Grazie!
@bendornan61153 жыл бұрын
Found you from TA Outdoors, Felix. Great channel.
@naomy17012 жыл бұрын
cool project, very nice! thx for sharing ^^
@FelixImmler2 жыл бұрын
Thanks a lot for watching!!
@bruhgamer3163 жыл бұрын
My dad gave me a Swiss Army knife it was a huntsman but it didn’t have a hook so I think it was an older model or a model similar to the huntsman. I will try to find a big log to make this.
@benotyourboss3 жыл бұрын
Nice job Felix, I would cut off the bark of the top 2cm!
@FelixImmler3 жыл бұрын
Thanks for your hint!
@tantilist14492 жыл бұрын
I learned how to use two SAKs at once, I can now build a particle accelerator out of sticks and mud.
@FelixImmler2 жыл бұрын
😂😂😂 please make a video!
@ianrtilley4 жыл бұрын
Merry Christmas. Ian
@FelixImmler4 жыл бұрын
Thanks a lot my friend!
@TheMightyStriker4 жыл бұрын
Du bist echt so mögig, Felix.
@FelixImmler4 жыл бұрын
Herzlichen Dank!
@brianferris12334 жыл бұрын
love the video
@FelixImmler4 жыл бұрын
Thanks a lot Brian!
@brianferris12334 жыл бұрын
@@FelixImmler I've made tobacco pipes in deer antler and wood using the same technic
@Incandescentiron4 жыл бұрын
Great job. I would like to have seen an addendum to this, three weeks later, to see if the cup is sealed.
@bartiboguesunset31673 жыл бұрын
Notice the log fits in the background, some skill put into that
@FelixImmler3 жыл бұрын
Thanks a lot for your comment!
@ThePBaranov4 жыл бұрын
Привет Феликс,отличная работа,хочу сделать такую же:))))
@FelixImmler4 жыл бұрын
Спасибо мой друг. Я желаю вам много терпения!
@thijsrikkerink63334 жыл бұрын
I have that knife as well. A Victorinox Huntsman, right?
@FelixImmler4 жыл бұрын
Yes, the Huntsman...
@Liam-ov8wy3 жыл бұрын
Would it still work if you didn't carve out the bottom so you didn't need to make a base to plug the bottom
@imbiscarra733 жыл бұрын
That's really a hard for the Swiss knife. How do you sharpen it? What type of sharpener do you use?
@SCCIT-jq6jh4 жыл бұрын
Show us how you sharpen your knife!.
@FelixImmler4 жыл бұрын
Yes, i will do that in the next months...
@TheBigCanucker3 жыл бұрын
Hey Felix Greetings from Canada...I was just wondering is there any other way to carve the channel in the bottom of the cup without modifying a Parcel Hook. I have a SAK Fieldmaster, Skipper, Swisschamp and a Swisstool Spirit. Are there any tools in any of these knives that will work? Thanks so much for all the info I really appreciate your hard work. Take care and stay safe.
@jensgerhardvonderfamilieti48943 жыл бұрын
Great work!!! Why don't you show the cup now? 3 weeks are passing away..;-)
@fivesfish4 жыл бұрын
I prefer the Kuska cup!
@FelixImmler4 жыл бұрын
Yes, but how to carve with a SAK?
@fivesfish4 жыл бұрын
@@FelixImmler I think most of the carving would be straight forward. For the hollow centre I think a cone shape carve would probably would work best?
@Marusija83 жыл бұрын
KLASS... !!! 🌟🌟🌟🌟🌟🌟🌟🌟
@FelixImmler3 жыл бұрын
Danke Yuri!
@clarky44924 жыл бұрын
Thats the ranger I have that and a farmer as my favourites what are your favourites
@FelixImmler4 жыл бұрын
Camper oder Huntsman ...at least from the 91mm Models
@clarky44924 жыл бұрын
@@FelixImmler I find my ranger abit large for the pocket thats why I'm glad I asked . Camper looks the next best option for camping etc
@johnglennon42454 жыл бұрын
Hard work but great results
@FelixImmler4 жыл бұрын
Thanks a lot John!!
@dr.rajasaurusandunclebonec65264 жыл бұрын
Amazing 😍 Does it add flavour to the drink? 🤔
@bushcraftkrofdorf90454 жыл бұрын
Servus Felix,boah...hard work! Ist der Becher echt dicht geworden? Kann man nicht auch soweit schnitzen ,so das ein Boden bleibt wie bei einer Kuksa? Bei uns gibts viele Birken. das Würde ich gerne mal probieren.Wie immer tolle Vorstellung.Vielen Dank dafür! LG Jörg
@CorgiCorner3 жыл бұрын
Could always put resin on the bottom
@bilakos19874 жыл бұрын
And how long did it take you do carve that cabin?
@FelixImmler4 жыл бұрын
The new Victorinox Model from next year will have a chain saw 😂😂😂
@MaxShadoff4 жыл бұрын
Hello! Thank you for the video! Please tell me where can I buy such a hat?
@Ernest-xc5qo4 жыл бұрын
Toll ja so toll!
@FelixImmler4 жыл бұрын
Vielen Dank lieber Ernest!
@Dr._Spamy4 жыл бұрын
Aber der Boden wird auch etwas schrumpfen, und nach dem trocknen eher oval sein. Wenn der Umfang des Bechers stärker schrumpft könnte er zwar trotzdem halbwegs dicht werden, wenn er es schafft, sich dem dann ovalen Boden anzupassen, und er auch nicht zu stark schrumpft und dann womöglich reisst... Aber, trotz allen, oder gerade wegen den Bedenken, ein interessantes Projekt. Ist das eine "historisch erprobte" Konstruktionsweise oder muss sie sich erst noch bewähren ? ;) LG
@FelixImmler4 жыл бұрын
Hallo Dr. Spamy. Der Shrink Pot ist eine "historisch erprobte" Konstruktionsweise. Ich glaube das kommt aus dem nordischen Handwerk. LG Felix
@tokoloshe424 жыл бұрын
How disappointed were u when it leaked? Give us an update in a few weeks, im definitely goin to b trying this out. Great video brother, keep it up
@FelixImmler4 жыл бұрын
I will do that. Thanks a lot Andi!
@moriel-bareli2 жыл бұрын
Hey, why not just carve one hold from the top and leave the bottom in tact?
@tuckereberhard97284 жыл бұрын
What model of victornox are you using?
@FelixImmler4 жыл бұрын
Victorinox Huntsman!
@twitchbitbandit94264 жыл бұрын
If your swiss army knife doesn’t have a hook can you substitute with the can opener?