Fender Extender installation on Honda NC750X

  Рет қаралды 17,440

HOW TO USA

HOW TO USA

Күн бұрын

Пікірлер: 28
@noebiwankenobi6746
@noebiwankenobi6746 4 жыл бұрын
Can you tell me what specific silicone you used? (i live in Europe and probably would need to buy a different brand. I just need to know what SPECIFC silicone it is...as there many different kind of silicone in the stores. Also interesting to know if it still holds......
@webmastermail8
@webmastermail8 3 жыл бұрын
Tiger seal or puraflex 40 would make a better job than silicone it's used for bonding car windscreens and body skirts etc, it's like a black rubber and won't ever come off, it's only about £5/£6, used it to stick bumper extenders to my sons car, held for years and still is as far as I know.
@michaelfrascati7610
@michaelfrascati7610 4 жыл бұрын
Nice complete video. Where did you get carbon extender and how much? Plan on getting NC750X very soon!
@p.santos6644
@p.santos6644 5 жыл бұрын
Nice video, thank you for sharing 👍👍👍
@Patrick-qm4xt
@Patrick-qm4xt 5 жыл бұрын
Sandpaper would have done the job much quicker and thorough...
@speedmachine6275
@speedmachine6275 5 жыл бұрын
I will be using 3M double sided tape making sure to get as close to the corners as possible and close of all sides
@gman00023
@gman00023 Жыл бұрын
I think it is really good advaise
@afds92
@afds92 4 жыл бұрын
I'm about to do the same to my new bike and I was wondering if it stills hold after long time?
@khalidaziz5991
@khalidaziz5991 4 жыл бұрын
I'm about to do the same now too, what do think ? Is yours still holding using this method?
@afds92
@afds92 4 жыл бұрын
@@khalidaziz5991 I haven't put it yet but I'll put it soon with some sealing glue.
@khalidaziz5991
@khalidaziz5991 4 жыл бұрын
@@afds92 Well, I used the same method and installed it on my bike now. It has been on the bike for a week and I can tell you that it's rock solid. I used "Evo-Stick Sticks like Shit" silicon adhesive from Screwfix. I have sealed all the cavities to avoid water getting in between the fender and mudguard.
@afds92
@afds92 4 жыл бұрын
@@khalidaziz5991 thank you very much for the feedback. Good luck with your bike.
@Skeware
@Skeware 3 жыл бұрын
@@khalidaziz5991 hello. How is it holding after 7 months? Still great? Thanks in advance
@alexthebear
@alexthebear 5 жыл бұрын
Is it long enough for protect radiator from dirt, which can fly from front wheel ? Will bike clean if you drive off-road?
@p.u.s.h.532
@p.u.s.h.532 4 жыл бұрын
How did it LAST?
@fil6610230
@fil6610230 5 жыл бұрын
beau travail. merci
@Dp3.16
@Dp3.16 6 жыл бұрын
Did it hold?
@speedmachine6275
@speedmachine6275 5 жыл бұрын
Good question, I am wondering the same. I am about to fit my fender extender and am between silicone and two component glue like epoxy
@ccooper8785
@ccooper8785 5 жыл бұрын
@Ecclesiastes 3:18 3M sticky pads and plastic rivets for mine (once I get up the courage to remove the guard from the bike)
@pbon
@pbon 4 жыл бұрын
Hello Guy, I am in France, Could you tell me where i can find this fender extender ? Thank a lot for your very nice vidéos . See you soon Patrice
@luisrodrigues4981
@luisrodrigues4981 4 жыл бұрын
Maybe ermax have it
@ROMABUSCADOR
@ROMABUSCADOR 6 жыл бұрын
Like!!!!
@ccooper8785
@ccooper8785 5 жыл бұрын
Am I alone in thinking that it is ridiculous that honda fit such a pathetic guard to the bike in the first place? Mind you, if they showed any common sense then the bike would also have been fitted with shaft drive....
@teambenjamin1
@teambenjamin1 5 жыл бұрын
C Cooper I agree about the fender, but shaft drive robs power output, which this bike is already lacking.
@simonbravo2825
@simonbravo2825 2 жыл бұрын
Totally agree on the fender, but the shaft drive... Not only a power drain as @ben ducharme mentioned, but it would also add cost to the motorcycle making it significantly more expensive. The NC750X is a fantastic budget oriented motorcycle.
@gerrycollins7079
@gerrycollins7079 2 жыл бұрын
Like many manufacturers, Honda cut the corners on the basic bike and expect buyers to add a load of accessories to make up. But shaft drive is another matter - extra weight plus loss of transmission efficiency. A better way to go, give that NC stands for "New Concept", would have been belt drive, which is largely maintenance free. Although there are some transmission losses in a belt compared with a chain, you can do without a centre stand because there is no need for frequent adjustment or oiling. That weight saving compensates for any lost transmission efficiency.
@NoOne-qx4xv
@NoOne-qx4xv 6 ай бұрын
overkill. some tape ans screws would have done it in 30 minutes
Center stand installation on Honda NC750X
12:58
HOW TO USA
Рет қаралды 78 М.
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 14 МЛН
How Much Tape To Stop A Lamborghini?
00:15
MrBeast
Рет қаралды 255 МЛН
Ep 50 Honda NC750X : Pyramid Extender Fender Very Easy Install
3:23
Nice grippy foot pegs
11:30
HOW TO USA
Рет қаралды 1,9 М.
How to Fit a Scottoiler to a Honda NC750X
5:11
David Day
Рет қаралды 58 М.
Honda NC750x - Extras Added
3:24
Honda Africa Twin & NC750x Stuff
Рет қаралды 51 М.
Fitting A Fender Extender To A NC750X
14:03
Terry's Motorcycle Adventures on a NC750X
Рет қаралды 3,5 М.
HONDA NC750X  £3.99 Battery Saver!!   INSTALING A 12V RELAY
24:14
Crohnie Biker
Рет қаралды 12 М.
Honda NC750X Handguard Installation
3:37
Jeff Nading
Рет қаралды 8 М.
Top 10 Must Haves For Honda NC750X
17:36
Ideal Bike Adventures
Рет қаралды 222 М.
How to fit a Fender Extender to your motorcycle
19:33
BMC MOTO UK
Рет қаралды 5 М.
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 14 МЛН