Ferguson 35 23c standart Diesel Cold Start

Cold Start Ferguson 35 Goldbelly 23c Standart Diesel

[@dafyddmorris-si7lt]

We have one ours is the deluxe model with the deluxe clutch pedal, my father bought it new in October 57 and its still working scraping out

[@jamievlogs_steam.adventures]

Keep up with the great work on KZbin I've just started uploading videos about steam engines and steam trains and traction engines

[@satinderchhikara5019]

Good

[@shughume]

Nice start, but next time could you move the camera around much more? I wasn't quite dizzy enough that time... 😬

[@Rolf2014]

Gut gestartet,Top .

[@peterd9940]

@oldmasseysdenmark9792 has the knowledge of a fruit fly.....it is why his starts with a touch of a button and 6 cans of starting fluid😂

[@Lerssinen]

Cold ? Temperature is halfway up...

[@NickKamin]

I noticed the same thing

[@oldmasseysdenmark9792]

The gauge does not work🤦🏻 and if you actually had some knowledge you would know that if it Indeed was in Full working temperature it would not have started with 30sec of heat on the key. And it would also not have the mis fire on the injectors, because thats only when cold they tempt to do that. I recorded this video and i would newer put a video up saying it was a cold start if it was warm. There is a big difference ind the engine sound on a 23c when cold and hot, and if you had the knowledge you would know it!

[@Drivedesi]

I have also fraguason 35 ...1982 model ...your tractor look great...love from India 🇮🇳

[@MrParas3]

i just restored a 35 identical to this one, looking at it is like looking at its twin brother, very nice.

[@thomasjohnsson1040]

The trees are still green so it is not so cold. Do the same in the winter at-20°. But it looks great.

[@ErickS1929]

Good looking tractor I have a mf 50x I don’t know how I can make it look new like yours does.

[@aarreantti8782]

Niiiiceeeee Gold Belly as usually. I noticed; engine warm gauge shows; engine is warm🤔🤔🤔🇬🇧🇬🇧

[@oldmasseysdenmark9792]

The gauge does not work🤦🏻 and if it was in temperature it would not have started with 30sec of heat on the key. And it would also not have the mis fire on the injectors, because thats only when cold they tempt to do that. I recorded this video and i would newer put a video up saying it was a cold start if it was warm. There is a big difference ind the engine sound on a 23c when cold and hot, and if you had the knowledge you would know it!

[@peterd9940]

How convenient the gauge does not work.....maybe gt the knowledge to fix it?

[@chrisfleming5109]

This video is a FAKE, if you look at the temperature gauge before the start it shows full operating temperature!

[@milespostlethwaite1154]

The thing is, if he had tried starting that gold engine from cold we would still be waiting for it to fire!

[@oldmasseysdenmark9792]

The gauge does not work🤦🏻 and if you actually had some knowledge you would know that if it Indeed was in Full working temperature it would not have started with 30sec of heat on the key. And it would also not have the mis fire on the injectors, because thats only when cold they tempt to do that. I recorded this video and i would newer put a video up saying it was a cold start if it was warm. There is a big difference ind the engine sound on a 23c when cold and hot, and if you had the knowledge you would know it!

[@peterd9940]

​@@oldmasseysdenmark9792if only you had the knowledge to fix the gauge, we could believe you

[@oldmasseysdenmark9792]

​@@peterd994035 year old restoration, video over 2years old, fixed it a long time ago, idiot🤦🏻😂😂

[@chrisanderson7587]

Runs and looks great!

[@mf-farmerservice]

Thansk

[@Rolf2014]

Sehr schöner goldy

[@Rolf2014]

Sehr schöner goldy

[@nickthomas8400]

water temp gauge shows engine warm!😙

[@oldmasseysdenmark9792]

The gauge does not work🤦🏻 and if you actually had some knowledge you would know that if it Indeed was in Full working temperature it would not have started with 30sec of heat on the key. And it would also not have the mis fire on the injectors, because thats only when cold they tempt to do that. I recorded this video and i would newer put a video up saying it was a cold start if it was warm. There is a big difference ind the engine sound on a 23c when cold and hot, and if you had the knowledge you would know it!

[@peterd9940]

​@oldmasseysdenmark9792 my stars, how come mf didn't refer to you before they phased outvthe 23c because of horrendous starting issues. Arrogant pos, you hve the knowledge of a fruit fly

[@peterd9940]

Maybe get the knowledge to fix the gauge so we can believe you

[@Rohit_poshwal_]

Nice

[@kerrysupporter]

Nice tractor

[@StuartOneill-u3m]

The best 😊

[@peterd9940]

Not a cold start, i had one of those horrid 23c's happiest day was when i sold it

[@oldmasseysdenmark9792]

Owner fault, lack of knowledge

[@peterd9940]

@oldmasseysdenmark9792 shows your lack of knowledge as 23c's were known to be very, very difficult to start.

[@oldmasseysdenmark9792]

@@peterd9940 you cant say that about them all! We have two that start on the button and one that starts worse. And its stil up to the owner how good they run and start. Owner fault and lack of knowledge then they start like you say. If you really think that every one of the 23c thats ever produced starts like shit, then i would say you need to go to school again. People like you really need to get out in the real world and see some of the many 23c and MF65 MK1 that actually starts on the button. Just because you had one and you heard a old story from a oldtimer, does not mean that its THEM ALL! Also the batteries they had in the 50's was nothing to write home about, hopefully you knew that already.

[@peterd9940]

@oldmasseysdenmark9792 yes of course your 23c's run great because i forgot you are the worlds best mechanic, you are so perfect and skilled!. But in reality people like you are just arrogant knobs like yourself, that believe that they are sooo special, that they are so much better compared to everyone else. I am happy that your 23c's start fine. Too bad mf had to phase out the 23c, and went to all Perkins, when thats all they needed to do was wait until you arrived to show them how to make the 23c engine start on a button!

[@peterd9940]

@oldmasseysdenmark9792 oh my stars, i did not realize i was addressing a magical mechanic, and the worlds best mechanic in general. How come mf just didn't get you to fix their issues with these engines before phasing them out??? Hopefully you knew the design of the combustion chamber, the finicky timing and the changes mf requested from standard all went into the starting issues the engine had even with heaters. But hey yours start with a touch of a button, so obviously mf should have referred to you back in the day! Oh wait a moment, its people like you that are so arrogant, egotistical and prideful to believe their own bs, to spew nonsense when they cant just admit they are wrong. Yeah bud, im sure yours start at a button after a tremendous amount of time, money and your bulk supply of starting fluid, because we all know your secret bud, starting fluid, hopefully you know spraying an entire can into your intake is bad, hey you probably learned something 😉