Better than festool tv!!! Proper demonstration. Well done and thank you!
@NewBritWorkshop Жыл бұрын
Glad you liked it!
@GaryThomsonJoinery6 жыл бұрын
Looks like a very useful drill, I’ve not yet made the move over to festool for fear of liking it so much I’ll want the whole range. Thanks for sharing 👍😄
@NewBritWorkshop6 жыл бұрын
Hi Gary, It would be worth it in the long term. Cheers. Peter
@seeuonthetrack3 жыл бұрын
I'm a convert and loving it,once you start using Festool it makes sense 🤔😆👍
@MrPatdeeee6 жыл бұрын
Absolutely superb demo from our gracious Peter! Always a pleasure.
@NewBritWorkshop6 жыл бұрын
Many thanks Pat. Peter
@alansimpson5966 жыл бұрын
Many thanks, Peter for demonstrating such a superb tool.
@NewBritWorkshop6 жыл бұрын
Hi Alan, Many thanks. Peter
@kevinohara86712 жыл бұрын
Iv just got one of these and its great I love the handle and the magnetic holder why isn't every drill like this its truly brilliant lol
@NewBritWorkshop2 жыл бұрын
Hi Kevin, I agree. Cheers. Peter
@slhasebroock6 жыл бұрын
Thank you Peter! I think that's the one for me. Was able to use them all when the Festool truck was is Omaha. By the way I am making a new bench top using your Parf system and everything is working perfectly!!! As you would say every hole is spot on!!!!
@NewBritWorkshop6 жыл бұрын
Hi Steve, Excellent on both counts ! Cheers. Peter
@ianrose28236 жыл бұрын
Purchased one back in January Peter . Love it
@NewBritWorkshop6 жыл бұрын
Hi Ian, Glad you like it. Peter
@edbouhl31006 жыл бұрын
Great video showing all the functions and fittings
@NewBritWorkshop6 жыл бұрын
Cheers. Peter
@markjarman7819 Жыл бұрын
I only started with a extractor. Now I have 2 cxs drills 2 t18 a tpc and a tid impact driver🥴 2 track saws a domino a cs 70 set version and enough systainers that would challenge the London eye😁 very addictive brand but a pleasure using it and building stuff.
@NewBritWorkshop Жыл бұрын
Hi Mark, My Festool kit started with a large purchase after selling all of my heavy machinery. It then grew slowly at the rate that I was able to save money from my day job. You are right, the tools are a delight to use. Cheers. Peter
@pf56585 жыл бұрын
Awesome! Hopefully my next Festool purchase. Been wanting one of those for a while now, but still can’t decide if to get this or the other one you showed at the end.
@MyTerryw6 жыл бұрын
When I went to get this drill, as 99% sure, I ended up with the T version as felt better to my hand, plus might be better in tight spot as hand still mostly within length of body when using.
@NewBritWorkshop6 жыл бұрын
I really do recommend that people try both styles before deciding. Peter
@hotdog1605 жыл бұрын
If you want a quality normal shaped drill than buy a hilti or a high end metabo. There's no equivalent of a c18 or a cxs, it's designed for some unusual tasks
@samsingh20424 жыл бұрын
I brought the c18, as a carpenter i am very used to using dewalt so when i got this i did really thing much of the machine until the attachment come out to play, its a different story
@NewBritWorkshop4 жыл бұрын
Hi Sam, I have lost count of the number of times that I have been saved by Festool's unique drill attachments. The angle gadgets are really well made and stand up to huge abuse. Cheers. Peter
@marcosbatistarb98116 жыл бұрын
The Festool is for me the best tooling Company in the world the quality in the manufacture of a festool Tool is unmatchet with the other tools so they stand out across the world , festool is careful to make its own components , Very good vídeo Peter , congratulações.
@NewBritWorkshop6 жыл бұрын
Hi Marcos, Thank you very much. I spent a long time researching tool companies before I started buying my new tools 6 years ago. Festool are the best value as far as I am concerned. Cheers. Peter
@marcosbatistarb98116 жыл бұрын
New Brit Workshop tanks Peter , i love Festool for my is Absolut perfect , execelent tools. Cheers.
@garyhorton66526 жыл бұрын
Love the eccentric attachment!
@NewBritWorkshop6 жыл бұрын
Hi Gary, So do I and now I will have to buy one to fit one of my other drills. Cheers. Peter
@VEC7ORlt6 жыл бұрын
Electronic torque control on these is the best, just stop and beep, just pleasure to work with. I'm torn about getting a CXS or C18.
@NewBritWorkshop6 жыл бұрын
I love the CXS but the C18 is an excellent larger drill driver with plenty of capability. Peter
@brianrussell76916 жыл бұрын
Thanks Peter. Another great Festool product review. I currently have a C15 Li Set. The Eccentric and Right Angle chucks are quite well designed and useful for cabinet work. My question is; what are the differences in the C15 vs the C18? The only difference I notice are the new Airstream batteries. (Admire their quicker recharge time.) Or are there other functional differences that would warrant serious upgrade discussion? Thanks again for all that you do. The topics you cover are as relevant to me as your teaching style is enjoyed and appreciated. For the record, I’m just a DIY guy who enjoys buying and renovating older homes and commercial property to add value in leasing and selling. Thanks again Peter.
@NewBritWorkshop6 жыл бұрын
Hi Brian, Good to hear from you again. I do not know the C15 at all. The C18 is a neat tool and so I suggest that you look in your C15 manual and see what characteristics your machine has and compare them to the Festool C18 on their web site. Good luck. Peter
@brianrussell76916 жыл бұрын
Thank you. I did as you suggested and discovered briefly the C 15 is a 14.4 volt device with a brushless motor so it has that benefit, and the C 18 is an 18 volt device and an ETC brushless as well. Perhaps the C15 was Festool's first crack at the brushless motor for a drill? Just a hunch. For my work, I haven't noticed a limitation yet on the C 15. So if i do need to go up in capability, maybe the smart thing is to look towards the PDC model. Thanks again ~ Cheers!
@NewBritWorkshop6 жыл бұрын
Hi Brian, Yes, if I were in your shoes I would certainly go for the PDC 18/4. It is a true workhorse and capable of anything in the drill-driver line. Peter
@tonysheehan77666 жыл бұрын
I also have the C15 and like the C18 it lacks, I think, an important feature, that is a hammer action. So you still need something like the PDC if you want to drill masonry and this leaves you with quite a heavy lump of a drill driver in the C15/18. I think a better all round pairing would be, say, a PDC for the heavy duty stuff and the C/TXS as your drill driver. It's certainly what I wish I'd done!
@NewBritWorkshop6 жыл бұрын
Good points. Peter
@eegaugh4 жыл бұрын
Is that chuck actually by Jacobs? I have a couple of older FS drills and I think both their chucks were by Rohm. On the "feel" point, I like this style of drill because it feels better balanced than the tee format when actually in use; it is, of course, shorter - another plus point for access.
@NewBritWorkshop4 жыл бұрын
I think most people use "Jacobs" as a generic for the keyless style. I do not know who actually make these. I have had no problems at all with my various Festool drills and therefore cannot fault the chucks in any way. Cheers. Peter
@tcbridges Жыл бұрын
Great and very helpful. I just ordered one and will be here soon. My question is should you or can you keep the battery on the charger. Like DeWalt suggest to leave the battery on the charger and it wouldn't hurt the battery.
@NewBritWorkshop Жыл бұрын
As far as I know there is no harm in doing this. I do it all the time, sometimes for several day. It is a very clever charger. Cheers. Peter
@AaronGeller Жыл бұрын
@@NewBritWorkshop From an electrical stand point, it won't hurt the battery as once the battery is at the right voltage, it'll "float". For long term storage, it's recommended to not leave it on the charger.
@ChristopheJOLLY5 жыл бұрын
Thank you for this video. How to choose between the T 18 and C 18. I cannot make a choice between these two drills.
@NewBritWorkshop5 жыл бұрын
Hi Christophe, Have you also looked at the PDC 18 - it is a great all round drill/driver? Peter
@cedricmiauton85593 жыл бұрын
Same for me, PDC 18/4 is much stronger
@mlatief58654 жыл бұрын
Good tool Thanks
@NewBritWorkshop4 жыл бұрын
It really is and I am delighted that you agree. Cheers. Peter
@kevinohara86712 жыл бұрын
The centrotec system is off the scale I'm using it in my other makes as well now no more spinning drill bits in dodgy chucks dewalt is especially bad for chucks my mates chuck has to be loosened with water pump grips to get his bits out
@NewBritWorkshop2 жыл бұрын
...and again... cheers. Peter
@symosys6 жыл бұрын
Great demonstration, Is there a Centronic bit that is 25mm and would go through a 3 inch joist?
@NewBritWorkshop6 жыл бұрын
Take a look at Axminster's web site. Festool do a 25 mm Forstner but it may not cut to a 3" depth - I am camping in The Netherlands and too far away from the workshop to check. Peter
@shield4003 жыл бұрын
Why is the angle attachment white and not black like the rest of the kit? That really bugs me! Does this drill have a battery level indicator?
@NewBritWorkshop3 жыл бұрын
The angle gadget is Festool grey and is a very solid bit of kit. There is a battery level indicator with a little button at the front of the drill just above the battery. Peter
@MultiWarrior636 жыл бұрын
Thanks Peter, great video buddy. Still muscle power for me. HaHa
@NewBritWorkshop6 жыл бұрын
Cheers Ken. Peter
@TheArtisansWoodShop6 жыл бұрын
Peter - thank-you for the excellent video! I already have the CXS and am pondering whether I should pair it with either the C/T18 or PDC. If you had to buy just one of these alternatives, which one would you go for for general woodworking?
@NewBritWorkshop6 жыл бұрын
Hi Steve, My next Festool video will go through these sort of options. For me, I would have the PDC 18/4 as it can also be used for drilling into brick. Cheers. Peter
@TheArtisansWoodShop6 жыл бұрын
Thanks Peter.
@TheArtisansWoodShop6 жыл бұрын
I believe the eccentric chuck doesn’t fit on the PDC, which is the only drawback for someone who predominantly does cabinet work. It may be a significant drawback for these users though.
@NewBritWorkshop6 жыл бұрын
Hi Steve, It is a pity as I found it so useful with the C18. Peter
@photozen83983 жыл бұрын
WOW…..!!!!
@DiHandley6 жыл бұрын
Hi Peter. Another great review. Will the battery charger for my new cordless Festool sanders accept these batteries? Cheers.
@NewBritWorkshop6 жыл бұрын
Hi David, Yes, those sanders come with the TCL6 charger which can charge all the large style batteries. The charging may take a little longer than the Airstream charger as there is no fan keeping things cool. Many thanks for the kind words. Peter
@wallacelux5 жыл бұрын
great video , cheers , one question , this being a lower revs and torque than say a makita dtd170 or 154 , how would it go driving batton or bugle head screws into timber where the impact driver makitas excel
@wallacelux5 жыл бұрын
basically my question is in comparison with a dtd170 makita
@NewBritWorkshop5 жыл бұрын
Hi Nik, I do not have the Makita but an impact driver may be better for what you describe. Peter
@wallacelux5 жыл бұрын
@@NewBritWorkshop , im not so sure peter, makita is disposable.. id like a trila as how it drills with speed and hardness of material it drills into
@jronmanbuilds6 жыл бұрын
Will the eccentric chuck fit onto the right angle chuck?
@artifexjoinery93236 жыл бұрын
It does!
@NewBritWorkshop6 жыл бұрын
The chuck will fit but the screw securing arrangement cannot be engaged and so it will not work safely. Peter
@jronmanbuilds6 жыл бұрын
New Brit Workshop thanks.
@TheRangeControl6 жыл бұрын
Great video, and as helpful as ever. I am curious about the Domino DF500 connectors... looking at possibly getting the kit. Could you please demo it for us? :-D I appreciate your work as always, Jedi Master Peter Parfitt.
@NewBritWorkshop6 жыл бұрын
I am in Festool UK's hands on this and need them to send me so demo kit. Cheers . Peter
@avckubw938v1bnvowiqv2 жыл бұрын
7:30 what are this stupid cuts? why
@daiburt18333 жыл бұрын
So what does it do that the others don't then apart from emptying you're bank account . Nothing apparently good video though I like a good laugh you're not at all biased you should be on QVC 😂