Ff 15 Industrial getting modified

[@jtsokiehobbyandadventures6666]

I have the diggit myself. Im going to add a fan to mine. I could only do 2100psi on hydraulic pressure. On the auger i all ways put on the other direction my self.

[@tigertoilet2]

I bought a ff-15 also . Picking up soon. Yours have hydro filter.

[@Rollie-Lund]

Dose not have an external filter yet.

[@denslod2930]

Are the quick connects 3/8 and did you use both female on the machine or one male one female?

[@Rollie-Lund]

Yup,3/8 pipe thread. Male and female on the machine and male and female on the attachments.

[@denslod2930]

@@Rollie-Lund Thanks, but I meant, 3/8 flat face, not the other end that's threaded. They come in 1/4" and up

[@gtgeorge1814]

My hydraulic lock out doesn't work either, they are on all the time. The switch tested fine, I'll try crimping the connectors like you did. I'll have to dig deeper if that doesn't work, any thought?

[@Rollie-Lund]

Wouldn’t know what to do if it’s stuck on, other than disconnecting it from the battery, the dye electric grease is important too

[@mudslinger1m]

Did raising the pressure increase lifting capacity? What's the most you've ever lifted with this machine?

[@Rollie-Lund]

It helped but not sure of exactly how much it can lift, keeping the lifting and swinging close by the machine helps a lot. It helped the auxiliary with the auger attachment on a lot, but a little too quick with the tilt bucket.