Fiat Ducato 2018 flashing oil light reset

How to reset change oil/flashing oil light indicators

[@gnarlord6319]

This worked flawlessly. Thank you very very much.

[@briansussex]

I tried lots of different suggestions to reset the warning light but yours actually worked on my 2015 Fiat Ducato 2.3 JTD 130 Multijet II. Many thanks!

[@michaeldawson6309]

Dave thank you so much for sharing this info its really appreciated. p.s I see 22 idiots who give negative indications for something which is very informative. Just shows stupidity is still common :-) I value you taking the time to share knowledge. Mike

[@rileys5141]

Thanks Mike I appreciate the feedback. This procedure is a bit hit and miss and sometimes people will need a variety of videos to get to the common goal so this video may not work for some which I suppose is where the negativity comes from. Glad it worked, Dave

[@tonifernandz1]

traducion 1-Contacto motor parado. 2-acelerador hasta el suelo (Sostener). 3-bombear pedal de freno 7 veces. 4-sostener acelerador abajo 60S. 5-soltar pedal quitar contacto por almeno 60S. 6-poner contacto y encender motor.

[@davidseamons1230]

gracias por poner las instrucciones en español.

[@tatamibro]

Worked for Kabe Travelmaster! Thank you so much for this video!

[@bettaplayitkool3817]

Thanks a lot man. I have Lancia Delta 1.6 mjet diesel and it worked.

[@jackgresty8683]

This has worked and saved me money , so thank you 👍🏼 easy video to follow

[@ianjames3078]

Thanks. Appears to have just worked on my 2015 2.3 130hp……..I had never had the oil change warning light in almost 8 years (28k miles) and had changed the oil 4 times. It came on recently so changed the oil again and had hoped it would just go off……hence ending up here! Thanks again.

[@garethdavies3220]

Thank you for this, the same method worked on a Fiat 500 l 2014.

[@timmyapples2]

I was absolutely convinced this was bullshit but gave it a shot anyway , had to leave another comment this well and truly works ! Much appreciated

[@gregkingston4913]

I was told the ECU has to be reset as well with scanning machine is this necessary? Thanks

[@izaakgray8521]

David you just saved my bacon mid 1000 mile drive at 23.30 on the side of the autobahn. Didn’t want to drive on if it was something serious (I change oil regularly), just in case. It reset and it worked and now I can finish the journey without fear of trashing my livelihood. Thank you!!!

[@davidseamons1230]

Thankyou for the message Izaak. I’m glad it meant that you can confidently continue your journey. Safe trip 👍🏼🚗

[@TCDEWE]

Brilliant !worked perfect on my 2016. Thank you

[@dannyboy19999]

Much appreciated

[@chrisbailey709]

Just to let everyone know tried this it’s rubbish press and hold accelerator and brake turn ignition on and wait ten seconds 👍

[@davidseamons1230]

@@chrisbailey709 Thankyou for your constructive comment. I’ll give it a go the next time I need it.

[@lloyddall6718]

Brilliant and simple thanks 🙂

[@ApplesnCastles]

Thank you - worked a treat on my 2016 130bhp 2.3 . The Service indicator also needs resetting (oil is done 👍) - any idea on that as well please?

[@gregkingston4913]

I was told scanning tool to reset ECU and as well as the dash needs to be done

[@gordonfiander9495]

Thanks Dave, saved our bacon on the M5. Pulled in at Strensham, found and followed your video. Worked like a charm on our 2014 motorhome. Thanks much appreciated ☺️

[@davidseamons1230]

Cheers Gordon, really glad it was helpful 👍🏻🔧

[@Del-West-Watson]

Worked a Treat 👌🏻

[@danielboom7472]

Thanks!!!!

[@rockinglifeontheroadiom]

Excellence Dave, thanks so much for this vid...youve just saved our holiday ❤ x

[@barteko777]

Excellent. Thank you!!!

[@NS-wy6dl]

Would it be same procedure fir the citroen relay ?

[@davidseamons1230]

I doubt it sorry

[@RTX4080Gaming]

Worked on my 2016 Ducato on the 1st try thanks

[@mathieuleger9538]

Encore merci, c'est la seule solution que j'ai trouvé qui fonctionne réellement

[@rileys5141]

Je suis content que vous ayez trouvé cela assez facile à suivre. Merci pour votre commentaire

[@jeremiahborrows5327]

Works! Reset on 2015 180 multi jet

[@jamesthirtyone]

I followed these steps twice Iver but it doesn't seem to have done the trick . Have I missed something else? Throttle held down. Pump brake 7 times. Release throttle. Turn off ignition for 60 seconds or more. In restart should be gone...

[@davidseamons1230]

Ah man that sucks. Is it a fiat ducato? 2018? Obviously it worked on the one i serviced so a little unsure why its not working for you

[@brownie69kil]

👍🤘🥰

[@197ben]

Doesn’t work on a 2021 model

[@davidseamons1230]

That’s a shame. Thanks for letting us know 👍🏼

[@rogercorbett7962]

Is there a similar procedure to also reset the service interval on a 2018 on Fiat Ducato

[@davidseamons1230]

Sorry Roger but I think it’s a plug-in to reset the service indicator

[@rogercorbett7962]

@@davidseamons1230 I assume you mean something like MultiEcuScan? Seems strange that there is a procedure to reset the oil light/message/oil counter but not the service interval. Used to be a reset procedure for the older X250 Ducatos.

[@GFT-Workshop]

@@davidseamons1230 We have an up to date Texa system, and that won't reset either, your procedure had an extra step, which worked for resetting the oil change mileage, but we still have the service mileage to reset. No idea why they have two reminders though!

[@raycripps6703]

Does this also reset the oil change counter in the MENU?

[@raycripps6703]

To answer my own question Yes It Does. It can therefore be used to reset the 'Mileage to change counter' after an oil change. In the case of my 2017 Ducato 2.3 150 bhp it reset to approx 29,900 miles.

[@rogercorbett7962]

@@raycripps6703 David says that you need an OBD plug-in, (perhaps Multiecuscan) to reset the service interval. Did your reset only change the oil mileage counter and not the service interval?

[@dominikstratil8787]

Also worked on 2015

[@raycripps6703]

@@rogercorbett7962 Sorry just seen your question. No it never reset the service interval counter only the oil change one. i reset the service interval counter with an icarsoft FA V2.0 diagnostic tool. Funnily enough this was with a command for resetting the oil change counter, it actually reset the service interval. This may be because the tool was designed up to euro 5 models so functionality is not fully compatible with euro 6 models