FIBREGLASSING THE HULL ready for STRINGERS| Pacemaker 20ft | Full BOAT RESTORATION V2 - Part 12

[@AngryMackAdventures]

Thanks to your support, we have made it to 10,000 subscribers! that is wild! Upwards from here! enjoy the video :)

[@jims4539]

Just waiting for the weather here in Ohio USA. New stringers, floor and transom in a 16' 1968 Sport Craft. Bought at auction unseen last year. Motor (Renault 60hp) runs. So, with luck I'll be glassing this week.

[@tonykennedy6737]

Hey Mate, Love you work and thank you for making these videos!!!!

[@westie4ageturbo.749]

Looking good !

[@AusAdventure]

Nice work mate. It should be a solid boat when you are finished.

[@maxsr3236]

You're the B.O.A.T. - best of all times

[@AngryMackAdventures]

Hahaha thanks mate!!

[@Allthewayfromtherez]

Bad asss. Crazy beefy. Hear in the USA I have a 17 foot fiberform trihaul I stretched the bow 2 feet and flaired the rails from 7 foot wide to 8 foot wide. We are building really similar. I did 3 layers of ply on the transom and added two 2x12" stringer and two 2x6" stringers then one 2x6 keel stinger. I plan for a 225 honda

[@jimferry3509]

real nice work, thanks for sharing

[@randynaser7288]

You smashed it out and the boat will be seriously beefed up. Great job and good luck on your fishing trip!

[@AngryMackAdventures]

Thanks a lot randy! Yes hopefully we do well 👌🏽

[@jay-deemac1064]

8:23 you should roll up you sheet and work it on from one side instead of just chucking it on like a bedsheet will be probably much less trapped air

[@chrisclaphan6098]

Nice work

[@Oz_Rebuilds]

So good man can't wait to see the floor going in

[@AngryMackAdventures]

Thanks mate haha me too 😂💪🏽

[@tonyburton4963]

What weight CSM are you using? Good to see you explaining overlaps etc.

[@michaelmcclymont4172]

Hi mate Hope you had a good fishing trip and Easter, eagerly awaiting the next video! When dose it drop, Cheers legend keep up the good work, loving it !!

[@AngryMackAdventures]

Hey mate! was an awesome time! Getting back into the boat this week, hoping to have my first video out by next Tuesday :)

[@doublehelix109]

i hate how much easier it looks on youtube than i real life, the days of cutting and grinding of prep. have had my 6m for about a year now and i still havent finnished removing the inside

[@AngryMackAdventures]

Hahaha definitely not easy lol!! Thanks for watching 🔥

[@KeepCastingCo]

Did you have to use epoxy resin or is polyester resin enough ?

[@bullhippo9023]

Good to see someone put some resin on, most I see act like they are afraid to put sone resin down.

[@nossrc5638]

Why you laminate the floor ?? I just did my checkemate floor ,stringers and transome but only laminate 6" from stringers maybe is bacause is 21' hull and diferrent 👍

[@Tenorsaurus]

I see you've been watching the Captain's videos for Inspiration too!

[@AngryMackAdventures]

Absolutely, love there stuff!! thanks for watching :)

[@sewing1243]

I know our host said he was off on another Angry Mack Adventure, but that doesn't help the lack of a new video withdrawal symptoms I'm suffering from. 😵🥴😉

[@rolandtb3]

How are the legs & back after completing each 3 meter section 3 times? Bow, stern/transom, bilge. Enjoy fishing trip. See you in a couple of weeks. Another great video.

[@AngryMackAdventures]

Hard yards that was lol pretty sore 😂 Thanks mate 😂💪🏽

[@bradleyferdinand9192]

Hi Nick, What did you use to fill the streaks? Also, aside from cost, are there any draw backs to doing the build with Epoxy? I am rebuilding a 1978 Grady White. I almost have the hull ready for fiberglass.

[@beastyfanox3060]

Hey bro, could you come in New Caledonia ? I need big help and a very big good mood ! Come with your father ! So funny together ! I hope you enjoy fully of your boat ! 😎🤙🏽

[@sewing1243]

Question? Do your roller handles have the threaded opening to accept a wooden or fiberglass "broom handle"? If yes would it have been easier to roll the resin into the fiberglass (at least on your back)?

[@AngryMackAdventures]

I think it would be much easier do this lol, I did think about it but the time I realised a better method I was half way there 😂😂

[@sewing1243]

@@AngryMackAdventures Hindsight is always 20/20. 😕😕

[@jaydenterek5935]

Where do u get your glass from?

[@AngryMackAdventures]

Hi Jayden a shipwright sources for me :)

[@jaydenterek5935]

@@AngryMackAdventures thanks mate much appreciated 👍

[@busuttilmark]

I don’t agree with filling the streaks.. that is a major stress point and the stringers should have been placed directly into the streaks and then glassed. Saying this from boat building experience.

[@AngryMackAdventures]

Hi mark thanks for the comment. May I ask how it adds stress and the difference between filling the strakes and placing a stringer in the strake and glassing up? Later in the build the stringers are going to be placed on top and glasses over. Also the reason I have done this is because of a professional shipwrights recommendation If the boat is flexing bow to stern causing strakes to stress we got biggger issues 😂almost

[@busuttilmark]

@@AngryMackAdventures when you place the wood stringer directly into the streak channel and glass it on both sides, it distributes the stress directly to the wood. Since wood has flexing properties, it avoids the possiblity to have longitudal stress cracks.

[@AngryMackAdventures]

@@busuttilmark thanks mark will keep in mind. Also not using wood as stringers will be out of foam.

[@roblescurbappealconcrete]

Hey Mack No disrespect, just wanted to let you know, from my boat building experience, you’ve use a lot of resin. When there’s too much resin, it encases the fiberglass and doesn’t really let it flex. So with less flex the resin (glass now) will crack. And I would have drilled some holes in the plywood when you applied that putty to let that putty ooze out more evenly. Obviously you’re not going to sand it all out now. So, I’d like to say, I have enjoyed your videos. Remember, hard work will get you there. I can’t wait to see what kind of power you’re gonna put in this boat. Texas

[@malcolmyoungacdc]

​@@roblescurbappealconcrete​​it is a bit disrespectful. Perhaps you did not watch the full video. One can clearly see that he ultimately rolled out the excess resin.... Australia. Ok Texas.

[@Suraj-s4l5q]

🎉

[@abdelali6088]

My dream is working and you brother

[@Aucklandsaltwaterflyfishing]

m8 you basically just made a boat.

[@AngryMackAdventures]

Basically 😂 thanks for watching mate 💪🏽

[@one1shot1shaun]

Hey man content is getting pretty boring I haven't. Even watched the last 2 videos this makes 3 Anything else coming ?

[@AngryMackAdventures]

Hey Shaun, shit sorry to hear mate. Yes the next few weeks will be some fishing content and even some laser base cliff fishing and 4wding in the next 2 months! But the main focus is the boat build

[@lukehargrave3516]

Haha bloody hell give him a break, good work l sure don't miss my build, enjoy watching yours tho