All work and words by Chris Jarzynski Chris' Fiero Dew Wipes can be purchased at: www.fiero.nl/fo...
Пікірлер: 28
@jimsxray3 жыл бұрын
I watched some poor soul's video who drilled out the metal pop rivets to be able to remove the glass in order to get to those two screws. I'm certainly glad that I discovered your video,
@thedeplorable7867 Жыл бұрын
Great informative video! I've been working on cars/ industrial production machines for 40 years. I have never seen your tape and screw method although could have used it several times. Thank you.
@nayumicraig5248 Жыл бұрын
Nice video. Quick and I especially like how you used both hands to do the work rather than using one to hold a camera. Lorne.
@tkmad74709 ай бұрын
Great video! Concise, to the point, and very helpful, thanks!
@upstairsguitardave3 жыл бұрын
Yo Chris, Excellent...I mean excellent job of walking through the replacement of the Dew Strip on the Fiero. Thank you so much. Cheers
@markgunther2502 Жыл бұрын
Never tried it this way. Good method if the screws are rusted.
@08stormtrooper6 жыл бұрын
I want to take the time to personally Thank You for providing a excellent video on changing the dew wipes on my Fiero. I could not have done it myself without your video.
@fabio402 ай бұрын
I tried replacing the dew wipes on my Fiero this morning. I got one of the centre screws out, but no matter what I did I could not get the window quite high enough to get the second screw out.
@bobfagley87907 жыл бұрын
This is the best way to do it...especially when the screws are corroded in. Thank-you VERY much!
@PaulMorrissette4 жыл бұрын
Super vid. I tried the special tool you can buy to get to the tough screws, but it just wouldn’t grab them well. This was a much better way to approach it. I was a little nervous about messing with the window roller, but once you understand how the part works, it makes complete sense. Thank you.
@electric86683 жыл бұрын
This has got to be one of the most complicated doors to work on.
@PrimericanIdol5 жыл бұрын
What about for manual windows?
@kevinmedere44413 жыл бұрын
Thanks for the video. I just got done doing my 86 GT. It took me about 8 hours to do both but I could not do it with out this video. By the way, I got my dew wipes from the fiero store. The passenger side lines up good but the drivers side I had to file some of the holes bigger. Thanks again!
@billdarnell56503 жыл бұрын
Thank you, thank you. Your explanation is thorough and great close up on the video.
@AdamAve934 жыл бұрын
Can this be done at all while the electric windows have no power? Currently have my engine out so no power to wire harness.
@colindubord86968 жыл бұрын
Great Video! Thank you so much for making this! You've helped me out more than you can think!
@hax24445 жыл бұрын
Perfect! You deserve more subs man!
@thecoochmon1127 жыл бұрын
Nicely done & explained...........
@hondaman69184 жыл бұрын
Vocoders job!
@dougmeadows23886 жыл бұрын
Great Video!!!
@danawick98174 жыл бұрын
WHAT YEAR IS YOUR fIERO
@Bobster9867 жыл бұрын
You can buy both the inner and outer window seals at www.fierostore.com , plus you don't have to remove the trim plate, just remove the screws and it will fit through the door panel opening.
@dr.schmecklesbergklitnick38115 жыл бұрын
Are the Fiero door lock cylinders easy to reach?
@Phildphunky14 жыл бұрын
Yes. I installed new locks while I had tbe door all apart. A little tricky but just take your time and you'll be good.
@jcmusco6 ай бұрын
Nice video, I paid someone to do it. Not for me, bad hands.
@bryco323 жыл бұрын
Can you please share the part # or truck model and year you used the inner dew wipe from? I see you modded them to fit the the fiero. I think I can swing those modifications. Would like to know what they are off of though.