Fiesta rs turbo restoration pt:6 seam sealing the underside

[@djemmay]

Love the project! My first car was a mk3 fez in radiant red, so I would definitely say paint the repairs red as cost-effectively as possible.

[@ryannse]

When you paint the outside, dont mask up the door holes and let the red drift inside. Its all they get from factory. I have a white one thats just been finished, if they are ever finished, good to see another being kept alive.

[@Tobyyjamess]

Thanks for the comment mate 👍👌

[@michaellecky6438]

She is in amazing condition,much better than the one I’m restoring . Did you not fit new inner arches as you have got part of your outer wheel arch missing under the filler hole which is part of the inner wheel arch repair panel and also on the inside of the wheel arch along the flange it’s not joined to outer wheel arch , (double flanged)where the holes are for the kit. Not sure how you can sort it now , but you need to do something or there will be water ingress and probably body flex. Sorry

[@Tobyyjamess]

This is how it was when I brought it mate ? I don’t quite understand what part your on about?? Could you send me pics on insta ?

[@fiestaturbo1287]

Yea you can see at 18:22 the inner arch hasn’t been attached to the outer, if you google the inner arch panel you should see it has a lip and goes down as far as the cut out as there’s a bulge from the inner panel that fills it.

[@finleyk]

400 or 500 on the inside then just 2k direct gloss, job done

[@petergrinnell2500]

Well that looked a good shell as ford rot like mad I've done plenty over the years so it wasn't alot of welded them fiestas turbo's are quick but used to skip about when drove hard I wouldn't worry about painting it at you can't see I would paint the floor with black paint even brushed to stop it rusting again like you said no body going to see it but it's your choice mate 👍

[@Tobyyjamess]

Thanks for the comment mate 👍👌

[@Snip59]

Quick 400 sand then a quick spot of paint for the inside mate.

[@Tobyyjamess]

That’s the plan mate 👌👍

[@user-yq9kw5by5b]

Good video there mate

[@Tobyyjamess]

Thanks mate

[@Snip59]

Welcome

[@leepearce3148]

Nice Job Toby, are you going to take the windscreen out in case there is any rust ect underneath?

[@Tobyyjamess]

I’m going to take it out this week mate , reason I’ve left it in as it’s cracked so wasn’t bothered about it getting ruined

[@aliso8017]

Rattlecan FTW! Decent enough for peace of mind knowing it's all red underneath, but quick & cheap enough in terms of cost/results.

[@Tobyyjamess]

Sure is 👍👌

[@Snip59]

Sand Blast then Lead wipe it if you have time mate.

[@Tobyyjamess]

I’ll look into lead wipe , never heard of it

[@Snip59]

@@Tobyyjamess it's old school but does a great job rust will never return as long as you clean the surface welll.

[@rmsdiagnostics]

Nice one mate, can I ask have long have you had so many subscribers? It looks like it’s a new channel? Also check my Rs turbo combi van build if you like Old Ford🙏

[@Tobyyjamess]

I had videos before mate but deleted them , will check them out 👍👌

[@simonspider]

If areas are like new, why re-paint them??

[@Tobyyjamess]

Because I want it all the match