Figuring Out the Low Budget Hydraulics for the Adams Grader June 29 2024

[@certified68crazy3]

Always looking for a scapegoat Joey.. It was the same on the railroad . It couldn't possibly their own fault...

[@kingofobsolete4789]

yes story of my life getting blamed for helping out. oh well thansk

[@dave-uf8ir]

Cheers xzena 😊

[@kingofobsolete4789]

ok thansk

[@carlcarlamos9055]

It may be advantageous to have a coupler between the hydraulic motor and grader control to allow for shock and alignment. Check with Sir Rodney. We trust him. Take care.

[@kingofobsolete4789]

yes that is what we are hoping and should be easy to do thansk

[@dave-uf8ir]

Made it back yes right turn Clyde 😊lol

[@kingofobsolete4789]

classic film thansk

[@dave-uf8ir]

Neighbor got it dun blew window & door dam looks great cheers 🥂 guys 😊

[@kingofobsolete4789]

oh my thansk

[@andydubois8411]

At last.Dawn breaks over Marblehead.I listened to this segment twice. Using up stuff that you have saved for ages feels good doesn't it?😎

[@kingofobsolete4789]

second reply here, yes use up these items because they have no use or dollar value when i am gone thansk

[@ekmvig5589]

Thanks again

[@kingofobsolete4789]

your welcome thansk

[@liljoeii6091]

You'll have your big canister full of wood in there,toasting toasted tomato is awesome making me hungry thank you for the video

[@kingofobsolete4789]

yes we are not even close to be ready for winter. oh well thansk

[@kennethsonier1766]

Good morning from Cape Cod ⛵ It was great learning how you're going to set up the hydraulics, very interesting stuff. That must have been a stressful moment in your life, being accused of bringing down a helicopter. That's what's wrong with the world today nobody wants to take responsibility for their own actions. Great video as always guys 👍✌️🇺🇲

[@kingofobsolete4789]

yes very surprised i had most of it in stock and will be a easy job i think. yes helping people out seems to come back to haunt me for some reason thansk

[@giork2828]

New video at dinner, Yes!

[@kingofobsolete4789]

excellent, quit early and computer was fast for uploading thansk

[@dannycrooks8462]

Wet and 13 in the morning sunny and 20 in the afternoon in the Kingdom of Richhill Co Armagh Northern Ireland 🇬🇧

[@kingofobsolete4789]

well at least you did get come sunshine. thansk

[@VicsYard]

Nice!

[@kingofobsolete4789]

thansk

[@randymiller1604]

Nice idea converting to hydrolik motor

[@kingofobsolete4789]

thank you, better then playing with that long shaft through everything thansk

[@dave-uf8ir]

🔥🥂👑

[@kingofobsolete4789]

thansk

[@johnwinden8511]

Such organization, such common sense, such mechanical abilities, I’m not worthy! 🫡

[@dave-uf8ir]

😎

[@kingofobsolete4789]

too me a long time to get this organized. yes garth and wayne were my heroes too, lol thansk

[@danthompson1467]

👍👍🇺🇸🇺🇸

[@kingofobsolete4789]

thansk

[@stanpatterson5033]

Enjoying this conversion from mechanical drive over to hydraulic power. But, but, what will become of the knuckle-buster console? Have you got spools (or whatever those things are called) to put in place?

[@kingofobsolete4789]

we did more on that today which i will talk about in tuesdays video since todays video was all canada fun. thansk

[@tonyjones9715]

👏👏

[@kingofobsolete4789]

thansk

[@littlepaddy7444]

Aviation mishaps always result in lots of finger pointing, Good video Joey. Thanks bye.

[@kingofobsolete4789]

yes they do and no insurance so i will be out a lot of money for no reason thansk

[@dave-uf8ir]

Gotta go wife says damb ur right 😊

[@kingofobsolete4789]

whipped like pudding, lol thansk

[@dave-uf8ir]

@@kingofobsolete4789 😎

[@dave-uf8ir]

Thanx for haircut I deserved lit lol 😂

[@dave-uf8ir]

Got to go check on neighbor brought his hitachi 1980s ex 100 excavatot to finish my trails he is in zone 2 dad just showed up great gotta pos check u while 😊

[@kingofobsolete4789]

excellent, have fun thansk

[@dave-uf8ir]

@@kingofobsolete4789 🌶

[@stanpatterson5033]

Fish tubs ? Is that what those are? I had no idea that fish even took baths ! Lol.... Okay, when do we get to see one used for its intended purpose? Hint: time to go fishing, maybe? If you have any spare fish tubs, maybe ship one down to Sir Rodney and his gang of fishing banditos. Maybe it will bring them some better luck catching fish in the ice fishing season. LMAO !! Sorry, Rod. Not laughing AT you, laughing with you :)

[@kingofobsolete4789]

Johnny G would be the best one to show fish tubs since he hauls a whole 53 foot fan trailer full of them. Sir Rodney being south of here acquires the famous plastic milk crates for they handy carrying thing. thansk

[@dave-uf8ir]

Check u later Joey 😊

[@kingofobsolete4789]

ok i will be here thansk

[@digger413]

Wife said you need a hair trim ,me I like your videos I'm learning things

[@dave-uf8ir]

Needs poodle do lol 😊

[@dave-uf8ir]

Poodle cut 😊

[@kingofobsolete4789]

at least we all are learning thansk

[@dave-uf8ir]

🥂👑

[@dave-uf8ir]

Oops sorry I will take it was going some where but I won't

[@David-j5w9e]

Koo what are you going to do when you get the grader done use it to plow snow or make a new road to whoooo ville.?? 👍😊

[@kingofobsolete4789]

yes drive around waving at the ladies. i doubt we will re-live the great drive to the lodge because the lodge owner will then claim it as his, lol thansk

[@AndrewMoizer]

Been thinking of your hydraulic setup and didn't want to comment until I'd got around to watching this video (watched some of the later ones that gave the other details). I would definitely be putting that CharLynn Flow control in ahead of the big motor. Send the CF (controlled flow) output to the steering (where the little hydraulic pump output used to go) and the EF (Excess Flow) to the Orbit motor. P is pressure input from the pump. R is return to the tank which is plugged unless you want to put a pressure relief valve in there. The flow control looks kind of like the F1217 model (just based on internet search for pictures, not personal knowledge) which is good for 45GPM. I suspect you'll only need to have the control cracked to get enough flow to the steering system (There is an OFF in the casting that the red plate mostly obscures).

[@AndrewMoizer]

The picture top left on page 10 is basically what you want, with the Orbit motor where they show the "Directional Valves Open Center"

[@kingofobsolete4789]

excellent information and thank you taking the time to post so other can learn and enjoy too. will do more research once Sir Rodney gets the chain couple up to us. thansk

[@kingofobsolete4789]

i don't think the link came through for page 10 thansk

[@AndrewMoizer]

@@kingofobsolete4789 I must be doing something wrong with comments (or anything that looks like a URL causes issues). I sent you an email, hopefully that works (and this comment goes through).

[@AndrewMoizer]

For others (on this learning channel), try a search for "F1217 vickers manual", it should have an Alfa Hydraulics Page, search down for the link below where "F1217" is listed and it should download the part of the manual that has a bit of information about the flow control valve.

[@stanpatterson5033]

This might be my very own thought, but the more I hear about Whoville, and lodge owners in general, the more it seems that you are surrounded by no-goodniks up there. And that's a real shame, not good at all for tourism, lol.

[@kingofobsolete4789]

yes that is true that is why less and less tourists each year. then add in the gov cut back on fixing and grading the so called road it just destroys the south vehicles when they come up. thansk