FiiO K7/K7 BT input, output and gain introduction

FiiO K7/K7 BT introduction page:
www.fiio.com/k7

[@Xbox360mIRC]

Love my FiiO K7. Tons of power for my HD 6XX and good sound.

[@teknolojigundemi]

Hi, I could get enough sound at the end of volume knob and Hi settings. Which input you are using 6.35 mm or 4.4 mm

[@anasananas9133]

​@@teknolojigundemiWhich input?

[@GameKeyModSquad-hr4ln]

@@anasananas9133 I use Windows 11 >> USB Cable >> Fiio k7 >> PO >> 4.4 balanced cable >> HD 650

[@BolcheBric]

Simple, clear explanation of interface, 2min, thanks a lot. Would like that competitors does the same.

[@madMARTYNmarsh1981]

The FIIO K7 BT would have been perfect if it had bluetooth transmit and receive. I understand why it doesn't have it, but it would be nice to have the option as I regularly need to use my Sony XM5 headphones early hours so I don't eake my wife and kids. It is only during daylight hours that I can use my open back headphones. Bluetooth trasmit and receive would remove a few minimal steps when I swap between headphones. My K7 BT arrives tomorrow. I hope it is as good as it seems to be. I almost bought K11, but I want balanced audio and the K11 doesn't appear to have that. I'm a big fan of Fiio design asthetic, bravo on that. They look classy and fun, but not obstuse or intrusive.

[@seainc]

Hi, Audio source is a PC, using K7 as DAC. Should K7 come before or after the BTA30 Pro? Thanks

[@FiiOOfficial]

Which output are you using? If you would like to use headphone out, the K7 should come after the BTA30Pro.

[@teknolojigundemi]

Your website Windows 10 USB driver download was so slow. Also I couldnt find any info about 4.4 mm input pin layout. I will buy custom cable for my headphone and i didnt find any info in quick start guide. Please inform us your 4.4 pin standart. Regards.

[@FiiOOfficial]

Did you download from this link:forum.fiio.com/note/showNoteContent.do?id=202105191527366657910&tid=17 We provide three download links and all this fail to work fine for you? For the pins of 4.4mm port, you could contact [e-mail] and we could send the definition picture for you.

[@PropaneWP]

Is it possible to use all the features of the K7 with a Linux operating system?

[@FiiOOfficial]

Dear friend, do you mean a Linux computer? If yes, you could connect the K7 to it via USB theoretically.

[@RasierapparaT]

Can I connect AirPods to the K7 BT in order to use the AirPods with my Windows PC? 🤔

[@Xeon487]

No, It is only a receiver and not a transmitter.

[@blackneblina63]

Where is the 24 bits output option in Fiio Control Panel? I would like 24 bits since I don't have anything in 32 bits, just to avoid dithering. However, there is a lot of quality and power in this dac amp here

[@GameKeyModSquad-hr4ln]

for me , I set that setting in the windows 11. Windows 110 >> USB cable >> Fiio k7

[@NathanSky864]

Theres no downside to using the maximum bit depth in windows

[@GameKeyModSquad-hr4ln]

@@NathanSky864 Hello, If source material is lower bit rate flac file… what happen whe you set to higher bit on DAC?

[@NathanSky864]

@@GameKeyModSquad-hr4ln I read that Windows just adds a bunch of zeros to make the audio mix whatever bit depth its set to, this doesn’t add or remove anything and best case scenario you don’t have to touch the bit depth

[@RiceWitch-dingus-400]

I know what po is but what is pre and lo

[@GameKeyModSquad-hr4ln]

LO - Line out : Pre - Pre amp

[@RiceWitch-dingus-400]

@@GameKeyModSquad-hr4ln thanks

[@iHyone]

K7で何ら不満ないしBluetooth入力もほとんど使う事なんてないんだけど付いたら付いたで欲しくなるんよな

[@FiiOOfficial]

Then you may consider K7 BT or K9~