Finding the Clearest & Best Channel For your SENNHEISER ew100 G3 EM100 SKM100 Wireless Microphone

You can see the full PDF Manual at this link www.unomaha.ed...

[@paulkelly4530]

Clear explanation but every venue will have different EMI issues. Multiple radio mics, guitar belt packs, Bluetooth, wifi and whatever so this is going to complicate things at each event. I once had someone else’s mic coming thru my system from a venue next door he was on the same frequency. I was going through his system too. When I finally sussed out what was happening I went next door with my mic and we both had a laugh and changed channels 😂

[@TECHNOLOGYTIPS101]

Very ture!

[@williamschaafsma5743]

thank you so much for the video

[@TECHNOLOGYTIPS101]

You are welcome!

[@AnilKumar-zo2eu]

Thank you so much sir for your packaged information.

[@TECHNOLOGYTIPS101]

You are most welcome

[@richardgrand]

Very helpfull, thanks a lot! 👍

[@TECHNOLOGYTIPS101]

You're welcome!

[@sonias2579]

Excellnet! Thank you

[@TECHNOLOGYTIPS101]

Glad it was helpful!

[@scottbodilymusic]

Thank you for this. This is my exact system but mine also has the body mic but I can't figure out how to connect it. My hand held works great but show me how to connect the body mic to this system please. Thanks.

[@TECHNOLOGYTIPS101]

Hi, could you tell me what the model number is for the Body Mic piece?

[@RajochMusic]

Thank you to share now I can use my mic.

[@TECHNOLOGYTIPS101]

My pleasure

[@Shas4Ever]

Extremely great explanatory video 📹 👏

[@TECHNOLOGYTIPS101]

Thank you!

[@SelmoMediaProduction]

Thanks very useful information 😊

[@TECHNOLOGYTIPS101]

Most welcome 😊

[@SelmoMediaProduction]

@TECHNOLOGYTIPS101 this mic has never failed me.....

[@TECHNOLOGYTIPS101]

@@SelmoMediaProduction I am glad to hear that.

[@kulnav22]

Hello. What if you later switch ON all the wi-fi router and mobile phone signal, which it start interfering again?

[@TECHNOLOGYTIPS101]

You will need to increase the physical distance between the Mic receiver and the WiFi devices.

[@yeucuocsong6812]

Hello sir! Can you do the video how to mute the microphone I have the problem how to muted it even I turned the mute on the microphone still have sound I don’t know how to fix it thank you

[@TECHNOLOGYTIPS101]

That sounds like a hardware problem with the actual mute button. The mute switch needs to be replaced or the contacts cleaned.

[@naplesdj7601]

On the lavalier transmitter - scroll through the menu. There is a setting that says "MUTE OFF" - switch to to A/F on . Your mute switch should now work.

[@SelmoMediaProduction]

Why not use the sync function at the end

[@TECHNOLOGYTIPS101]

Good point, but that will not detect the existing radio traffic as good as you can find out visually and audibly yourself.

[@BrianTzib]

Hey bro Can you connect/use 2 mics at a time? Just place then in different bank/channel right?

[@TECHNOLOGYTIPS101]

unfortunately for that you will need a dual channel receiver this will not support two independent microphones

[@BrianTzib]

@TECHNOLOGYTIPS101 oh I see.. Thank you very much mate! Awesome video!!🙏

[@TECHNOLOGYTIPS101]

@@BrianTzib Thank you!

[@yekinnitoheeb1712]

Thanks a lot.

[@TECHNOLOGYTIPS101]

Most welcome!

[@sonivar2153]

Hello, a question where can I get the antennas that you have, those do not come

[@TECHNOLOGYTIPS101]

Hi, I purchased them from eBay, here is an example www.ebay.com/itm/305587220145

[@casualfriday3099]

Where do I set the gain for the mic? on the mic or on the receiver?

[@TECHNOLOGYTIPS101]

On the receiver, see page 6 of the manual here assets.sennheiser.com/global-downloads/file/693/EW300G3_529661_0109_US_INT.pdf

[@bensonmurimi1505]

Does sensitivity affect it?I have done all this and it is still not working

[@TECHNOLOGYTIPS101]

Try changing the location of the base unit, as it might be in a very high traffic radio signals.

[@kvw4052]

Thanks 🙏🏻🤘🏻🔥

[@TECHNOLOGYTIPS101]

No problem 👍

[@Gonzalez33veracruz]

Sir thank you for your video. Why does my microphone drop out sometimes. Is it due to sensitivity levels, or distance? I have EW100 G4 and i always scan at every new venue or location.

[@TECHNOLOGYTIPS101]

If the channel frequency is not too crowded with radio noise, then it has to be the distance. You can make it better by adding extended-range antennas like this one www.bhphotovideo.com/c/product/227114-REG/Sennheiser_A1031_U_A1031U_Omnidirectional_UHF_Antenna.html

[@NCZCushGold]

I am getting a sudden white noice when the cordless is on mute sometimes off

[@TECHNOLOGYTIPS101]

It could be due to a nearby radio signal transmission from some other devise with similar frequency.

[@NICEntertainment]

adjust squelch

[@TECHNOLOGYTIPS101]

@@NICEntertainment Good point!!

[@DhirvirBho]

Very much incomplete video forget to show other function too sync option not used

[@TECHNOLOGYTIPS101]

I'm sorry, but this was not a complete review video; it was only to show how to find the Clearist channel.

[@isradelic1]

Thank you!

[@TECHNOLOGYTIPS101]

You're welcome!