Finding True Length& True Inclination Of a Line

Projections Of Points: • Projections Of Points/... ,
Projections Of Points: Location Of A Point: • Projections Of Points:... ,
Projections Of Straight Lines: Location Of Line: • Projections Of Straigh... ,
Line Parallel to Both H. P&V.P: • Projections Of Straigh... ,
Line Perpendicular to H. P & Parallel to V. P: • Projections Of Straigh... ,
Finding Traces of a Straight Line: • Projections Of Straigh... ,
Line inclined to H. P & Parallel to V. P: • Line inclined to H. P&... ,
Line Inclined to V. P& Parallel to H. P:
• Line Inclined to V. P&... ,
Line Situated On H.P(Marking Projections &Traces) : • Line Situated On H. P:... ,
Line Inclined to H. P&
V. P: • Line Inclined to Both ... ,
Finding True Length & True Inclination Of a Line: • Finding True Length& T... ,
Line Inclined to Both H. P&V.P: • Line Inclined to Both ... ,
Projections Of a line & it's Traces: • Projections Of a line ... ,
Projections Of a line & it's Traces: • Projections &Traces:Li... ,
#engineeringclasses #onlineengineeringclasses #onlinebtechclasses #engineeringdrawingclasses#engineeringgraphicsclasses#onlinegraphicsclasses
#onlineengineeringclasses #instrumentationandcontrolsystemsonline #mechanicalengineeringclasses #onlinemechanicalengineeringclasses #civilengineeringclasses #onlinepolytechnicclasses #onlineiticlasses
#onlinegateclasses #gatemechanicalclasses

[@Vaishnavi-ot6br]

thank you for your videos Dr.Noori. Whenever i have any doubt your videos clears it all real quick! I don't have to search for any other channels

[@engineeringclassesbydr.noo3377]

Thank u. Pls Like, Subscribe and share my channel with students .

[@venuyadav3470]

thank uh very much mam very helpful🤗🙏

[@oreokarail]

Thank you, ma'am!

[@priyanshusaini4701]

thanku so much mam i am so confused in these questions after watching ur videos its so simple to draw easily

[@VatsalrajRathod]

This video is very helpful for me

[@abhithapapani5849]

A very good explanation thankuuuuuu mam............ 💕

[@devupallijayanth7879]

Thankyou very much mam, Because of u im able to under stand the concepts of this engneering drawing....

[@engineeringclassesbydr.noo3377]

Good

[@TarunKumar-kf8bi]

Such a beautiful explanation

[@engineeringclassesbydr.noo3377]

Thank you. Share channel with Students.

[@pcrmemes1828]

mam apne bhut accha samajya itna tu hamere ed wale sir 1 hr me karya tha thank you ple create more more video and sperate the gyan

[@engineeringclassesbydr.noo3377]

It's nice you are studying well. All the Best. Share my channel with students

[@bikkikumar485]

Thank you so much.

[@rajithasamarla1605]

Thank you soooo much mam for this wonderful Explaination

[@paulaedet4222]

Thank you so much!!! You’re a true life saver!

[@engineeringclassesbydr.noo3377]

Thank you for nice compliment. All the very Best.

[@tarakpeddinti8138]

Medam plz do problems on inclination of traces and mid point .it will be very helpful for my exam

[@mdlayeequllahqasmi4614]

Such a great explanation Thank you😊

[@NaveenKumar-fy5pl]

A straight line PQ has its end P 20 mm above H.P. and 30 mm in front of V.P. and the end Q is 80 mm above the H.P. and 70 mm infront of the V.P. If the end projectors are 60 mm apart, draw the projectis of the line. Determine its rue length and true inclination with the reference plane.

[@engineeringclassesbydr.noo3377]

Follow the same procedure as in video. It's a similar one.

[@Emma-Dee]

What if the difference between projections isn't given?

[@engineeringclassesbydr.noo3377]

Take the given angles and true length of a line.

[@JustRealAsf]

You are the absolute best.

[@engineeringclassesbydr.noo3377]

Thank you.

[@JasonLords-vw4lt]

Thank you very much

[@vivekmalviya3036]

Thank u mam

[@XcaliberrO07]

thank you mam.

[@engineeringclassesbydr.noo3377]

Share my channel with students

[@21yadav42]

4. A straight line PQ has its end P 20 mm above the H.P. and 30 mm in front of the V.P. and the end Q is 80 mm above the H.P. and 70 mm in front of the V.P. If the end projectors are 60 mm apart, draw the projections of the line. Determine its true length and true inclinations with the reference planes

[@bharathkumarreddy9633]

Good explain mam

[@engineeringclassesbydr.noo3377]

Thank you. All the Best.

[@venkateshguguloth7512]

Tq mam good explanation

[@vinayyelugu3609]

Simply Super👌

[@engineeringclassesbydr.noo3377]

Thank you.

[@gajagaruda8004]

Exdradinary explanation tq mam

[@engineeringclassesbydr.noo3377]

Thanks, share my channel with students

[@SureshBabu-yx2ph]

Thank you very much madam. Your explanation is very good. It's easy to understand

[@engineeringclassesbydr.noo3377]

Pls share my channel with students

[@gollapallishivaram4248]

🎉🎉

[@praveenmoses695]

It is like god sent you to save students 🥰🥰

[@engineeringclassesbydr.noo3377]

Very Nice & Big Compliment Praveen.Thank you very much.

[@sprrez]

Inclination aur lengths ke values 1-2 mm me differ krre hoge to marks katege kya?

[@engineeringclassesbydr.noo3377]

No

[@sprrez]

@@engineeringclassesbydr.noo3377 okay thankyou 🙏

[@509nandini7]

Mam can we apply grace marks for Engineering drawing subject

[@engineeringclassesbydr.noo3377]

Yes

[@nanitechviews8774]

Tq so much mam

[@engineeringclassesbydr.noo3377]

Share my channel with your friends

[@sidhukarigari1778]

Thank you madam

[@engineeringclassesbydr.noo3377]

Share my channel with students

[@animaqaar]

Mam apparent length aur apparent inclination kaise nikalte hain . Kal Mera exam h .🥺

[@engineeringclassesbydr.noo3377]

Apparent length and inclination means true length, true inclination (angle)

[@animaqaar]

@@engineeringclassesbydr.noo3377 thnkuh mam

[@quicklearner9598]

kzbin.info/www/bejne/iJvReKeFlrqWpbssi=zKMS0B4xYO51yueX

[@tamilarasan7679]

i'm also mam,thank you so much

[@engineeringclassesbydr.noo3377]

Share my channel with students, who are studying Engineering Graphics

[@rameshpudi2336]

Very nice madam♥♥

[@engineeringclassesbydr.noo3377]

Share my channel with your friends

[@M.durgakumari]

Please solve more problems mam

[@engineeringclassesbydr.noo3377]

Sure

[@yudhirkothari]

A line PQ has its end P, 10 mm above the HP and 20 mm in front of the VP. The end Q is 35 mm in front of the VP and the front view of the line measures 75 mm. The distance between the end projectors is 50 mm. Draw the projections of the line and find its length and true inclination with HP and VP. yee wala ma'am urgently please 🥲

[@motosansar3213]

babbal

[@anjitapoudel]

ekdam ramro

[@anjitapoudel]

Spandan

[@katyayani3697]

Thank you mam

[@naveenofficial3663]

Thank you mam

[@engineeringclassesbydr.noo3377]

Share my channel with students