Fine Feed Rockmill Parts for a Viewer

[@JD-ce4so]

If I was Kyle, I would be jealous of the new knob.

[@smlcritic]

Hello Burton, nice little project there, thanks for sharing:) bless you and your family, stay safe too:)

[@BurtonsAttic]

Thx Roger

[@gixerman01]

nice work

[@dannywilsher4165]

Nice looking knob! Thanks for sharing!!!

[@BurtonsAttic]

Thx Danny!

[@LarryDoolittle]

Nice! You take care of yourselves.

[@BurtonsAttic]

Thanks Larry

[@JamesDedmon]

Your knob turn out well. Neat trick with the DP vice. On the CNMG inserts it isn’t as much as the nose radius it’s more the chip breaker in the insert. In an industrial application the 431 insert would be a finishing insert. So the chip breaker is set up for shallower depth of cut. The 432 and up are more roughing inserts so their designed for greater depth of cut. On our smaller lathes this is why the 431 works better

[@BurtonsAttic]

I know James but those particular 432's will just chatter if I try to go deep to activate the chip breaker. They just chew regardless of speed/feed/DOC. I found these 431's can go about .030 max and like .020. I'll find some better 432's down the road. Thanks for commenting!

[@JamesDedmon]

Burton's Attic oh so these was extremely low quality. But keep in mind about the finishing chip breakers especially if you use EBay inserts like I so

[@rpederse]

Fun stuff.

[@camopirate]

subscribed ! recently picked up a 21-100 that is almost done being gone through, of course it is missing these exact parts. if you are Inclined to make another set I will gladly pay your price. until then Searching for a lathe. nice work on the VFD, that project started today.

[@BurtonsAttic]

Welcome! Email me from my About page with a picture of what you need.

[@HighCaliberCraftsman]

Could you please let me know what grease you packed the bearings in the spindle with? I am currently rebuilding my mill following your videos! Thanks! Austin

[@BurtonsAttic]

Hey Austin just saw your channel. Send me an email from my about page.

[@HighCaliberCraftsman]

Burton's Attic thanks! Just sent it through your eBay link. 👍🏼

[@sebastianochenkowski2665]

Did you get your mill brand new? 😳😳 Shocking condition, I need to watch your restoration videos and do the same with my bridgeport

[@JoeB-pv8su]

Great video.

[@BurtonsAttic]

Thx Joe

[@ironhead65]

Could you post the part number of that holder? Thats a great idea. I usually just toss after the two edges are used up

[@BurtonsAttic]

MCKNR2020K12 (3/4) which is 20mmx20mm and 125mm OAL, 100mm shank. If you need a smaller one search MCKNR1616H12 (5/8) or larger is MCKNR2525M16 (1"). You can only use it for facing but hey you get 4 more cutters!

[@ironhead65]

@@BurtonsAttic thank you for sharing!

[@phantomphixer679]

Burton, any chance I could get one of those. Mine was missing when I got the machine. Thanks in advance

[@williamfissell1694]

nice!

Hey! wazzup :p

[@BurtonsAttic]

Heyyy man!

[@Dankert919]

Great job, and great video! But, please stop jusing gloves when your sanding or doing other thing with rotating chuck in the lathe, it so easy to get caught in the chuck!

[@seantap1415]

That boring bar chatter was hard to take, on the headphones.

[@BurtonsAttic]

Sorry man! I knew it would be but that's really what happens. I did turn the audio down on that track, I guess not enough!