Fine tune the air conditioner temperature of VW e-UP

In this video you can see how I managed to go around the factory set start temperature of air conditioner on Volkswagen e-up (It should be the same with Seat Mii electric or Skoda Citigo iv). The car always starts at 22C and does not remember what was the previous set temperature. I managed to program the car using the OBDeleven device (obdeleven.com/) which cost 40 EUR for the device itself and 25 EUR for the PRO update (you need that in order to program the car).
If you have any questions? Comment below or ask in our Facebook Group: / eup.citigo.mii
You can buy #OBDeleven here: obdeleven.com?aff=43
----------------------------------------------------------------------------------------
If you would like support my videos you can donate: www.paypal.me/tedonash/

[@yianfam]

Thanks Tedo, your videos are always helpful. 👍

[@mladensantic]

Great video !

[@GreenStripShow]

Thanks for this

[@Blazt86]

Thanks for this 🤩👍🏻

[@tedonash2681]

You’re welcome 😊

[@StefanoFinocchiaro]

OT question: How the cooling of the cabin work in summer as it does not have an heat pump?

[@imrekemenyfi7250]

I would like to see a video that explains the control panel of VW e-up, what is the function of which button, especially on the control panel of the air conditioning/heating.

[@tedonash2681]

Imre Keményfi I will do a video about this. Thanks for the request.

[@andrey6669]

It stoped working for me after last SW update by the dealer. (the one that should prevent 12V battery discharging, its rolling out now). Regardless if i set 0 or 1 with obd11 it always returns to 22degrees. Any solution? Maybe they moved this parameter to other adaptation channel?

[@jlutz3590]

Hallo Tedo, at first thanks for your helping videos!! My question ist do you maybe know a way to keep the last setting of the driving program eco and eco+? Greetings from germany and stay healthy

[@tedonash2681]

No, I don't think that is possible to be done programmatically

[@fabici]

Hi, how can I use Abrp with ObdEleven on my new e_up? Thx a lot.

[@justinholding02]

Can you also deactivate the lane assist?

[@iansimons7466]

Hi really enjoying the videos. Can you tell me if the e up has a speed limiter and cruise control. 🤓👍🏻

[@tedonash2681]

Hi Ian, yes there is a speed limit. On normal mode the speed limit is 130 km/h and on Eco+ mode it is 95 km/h. There is also cruise control that is included in the standard equipment of the car.

[@iansimons7466]

Many thanks again love the content it’s all the stuff you really want to know if you’re buying the e up. And thanks 🙏 for the speedy reply. Merry Christmas to you and your family 🤓

[@konstanzu]

Hello Tedo, Is it works with e-Up! production year 2020? That setting with 22C very annoying for me too! I watched all your videos!!!

[@tedonash2681]

Yes it is working. I have change my car to 2020 model and applied the same setting.

[@jorgmeinhardt3623]

Could you explain the other possibilities in OBDeleven?

[@tedonash2681]

To be honest I have just started to explore this device. I have it for 2 days now and what I figured out is how to set the temperature of AC how to auto lock, unlock the car, how to turn on/off the horn sound when locking, unlocking, tuning some timing properties etc. I didn't spend a lot of time with this device as I am working and have a small kid at home. I hope I will have some time to spend with this device on the weekend and whatever I find I will make sure to make video about it.

[@osta030]

thanks for your video. I tried it on my car right away and it worked. Well, three weeks later, I have the same problem I had in the beginning. Although the value in channel 6 is still zero, it switches back to 22 degrees and air conditioning. You know what that could be?

[@tedonash2681]

No, mine haven't reset since I set it almost 1 year ago. Try setting it to 1 and then again to 0.

[@osta030]

@@tedonash2681 I hadn't had the OBD dongle connected for a while. Now that it is connected again, it works again.

[@claudiobottari4295]

Do you think it will be possible to replace the external sound of the new e-up?

[@tedonash2681]

I think so using the OBDeleven or some other OBD2 tools. I think this sound is optional at least in mine region. I am expecting my new e-up to arrive in a couple of weeks so I will test when it is here and will let you know.

[@jamesguy7396]

On my Seat Mii it only charges at 3.6kW when on a 7kW charger. I took your advice and bought OBD device and I notice in the battery charging app the charge rate is 16A. I can change this to 32A but I’m worried about warrenty before trying it. What do you think?

[@tedonash2681]

I saw this option on my e-up 2019 but to be honest I was afraid to set it to 32A. I am not sure is the onboard charger is software limited or hardware. In case it is hardware and change the limitation on software level you can blow the car. The way I will attach this problem is to buy a 7.2 kw charger which can increase the charge gradually. Then set the car to 32A and start increasing the charger currently on small steps to see if the car will do something.

[@jamesguy7396]

Tedo Nash I’ve got my dealer looking at it but no answer yet. Thanks for offering to blow your car up before me

[@milankucera7365]

Hi, can you make a video, What are all of the options of OBD11 for electric car witch can i use please? I think only specially function of OBD 11 for electric car, like what can be diagnostic and some info/ feature different from petrol VW UP! Thanks :-)

[@tedonash2681]

I have made a video where I am showing all of the functionality you can program with OBD11 : kzbin.info/www/bejne/hYXOc2tobNF5r68

[@milankucera7365]

Tedo Nash thanks, that is it :-) I did not find before. But still i do not understand many options there. I want to know some info about Battery condition like app livespy for nissan leaf. But thanks a lot :-)

[@boolesen4123]

I would like to see a video explaining how to increase the running time of the aircon when it has been activated from the "We Connect" app while the car is parked and turned off. Now the aircon turns off after approximately 30 minutes.

[@tedonash2681]

I was looking for that but unfortunately i haven't find a way. Why don't you just activate it 30 minutes before departure? Or a workaround would be a schedulers that overlap each other where the AC is turned on.

[@boolesen4123]

@@tedonash2681 Thank you for the answer Tedo, I was thinking about the schedule as well. It would solve the problem but is more laborious than just turning on and off the aircon. I was thinking about reversing my e-up into my teepee tent with the rear door open and half the car sticking out. That way heating the tent and avoiding a smokey fire.

[@tedonash2681]

@@boolesen4123 I had to admit this is very interesting idea.

[@vidarg75]

Have you done this to your new car? I'm worried about the SFD protection.

[@tedonash2681]

Yes I did and it is working just fine.

[@vidarg75]

@@tedonash2681 Thanks!

[@matthiasbeyer2658]

Thank you very much! But 8 minuetes video for what could have been one sentence: air conditioning - adaptions - block 6 - set to 0 - test- save & exit

[@GSino]

Can you please let me know if with the obd eleven can check the battery health?

[@tedonash2681]

I can check, but I need to know first what do you mean by battery health? How much cycles it went, how much capacity it have since factory release etc.

[@GSino]

@@tedonash2681 Is it possible to check battery degradation? For example when you are using leaf spy you can see the state of health and you can see for example the battery degradation that S.O.H. is 88% = 12% degradation

[@tedonash2681]

George Sinogeorgos I will check and let you know

[@GSino]

@@tedonash2681 ok thanks

[@tedonash2681]

I didn't find this info in the OBDeleven. But there is quite a lot of info there that I can accurately measure the current capacity. The one way I found is to discharge the car to 0% battery state of charge, then to record total kW that are entered into the car, then fully charge it and remove the current value of kW total energy charged into the car from the recorded value. The way I found that you can measure the battery capacity without any device is : 1. Fully charge the car and drive the car until you have less than ~1/4 left on the fuel gauge 2. Either using car-net, VCDS, OBDeleven, Carista, other OBD dongle/software or by estimating from the fuel gauge, determine the percent State of Charge (SOC). Each tick mark on the fuel gauge is equal to 6.25% SOC. 3. Record the average efficiency and miles covered to reach your current SOC. 4. Usable capacity = miles covered/efficiency (miles/kWh)/(1-%SOC). For example you went 110 km and you have left 25% o the battery. The average efficiency is 11 kW/h so you have (110/11)/(1-0.25) = 13.3 kW of actual energy you have in the car.

[@typxxilps]

FOR ALL CENTRAL EUROPEANS: OBD eleven take what they can get from you based on your nationality The pro version here is about 99€ as a kit ... so nothing llike 40€ + 25€ = 65€ ... And they do not allow you to transfer the licence. The websites automatically detects your location and then limits your offer to your country. Bulgaria must hat a 35€ discount - compared to central europe.

[@GSino]

Nice :) Next time you must mention the person who help you hehehe you should put a tag with my KZbin channel :) hehehe. Nice informative video! Please make more videos what else you can do with the obd eleven! Thanks

[@tedonash2681]

Yes George it was you that help me with this. I really appreciate that. I am avoiding to quote names because I don't know how people will react on that. We are neighbors and I am sure we will understand each other.

[@GSino]

@@tedonash2681 No problem, next time in the future we can cooperate :) I can make a video for you and you make a video for me to promote the channels