FINISHING The Ranger Prerunner *FIRST DRIVE*

[@sticky6882]

Finally found some one building prerunners on youtube

[@Fit4C]

Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell

[@colew4623]

Very useful for all the potholes in clairemont after rain

[@WingsWorldChannel]

haha! 100%

[@ronsteelable9405]

@@WingsWorldChannel You guys are in Claremont? You guys are right down the street from me! I've been welding for a few years now but I can't even imagine doing a setup like that on my truck. Great job, guys!

[@trashman1694]

i beams handle potholes like a cadillac

[@leftfordead6307]

Nice im in San diego to just south of you East san diego sick build

[@Gavinsbmx]

Omg Fr there so bad 😭

[@thezombikilla]

Amazing how all Rangers have the exact same power steering whine.

[@WingsWorldChannel]

haha! make that all 90's fords

[@MrJoshuaBe]

My mom has a 99 mustang and it has the power steering sounds the exact same lol, classic.

[@Snow0255]

It's the Ford whine

[@brandondannys-menary3678]

Yeah, along with the explorer haha

[@alexpuls8219]

I have a 96 ranger and surprisingly the PS pump doesnt whine. 😂

[@mrmidnight32]

Nothing like that nice loud whine of a Ford PS pump haha

[@lukescholey5872]

CK_32 I just picked a 2000 ranger up and have the same PS wine? Your comment makes it sound like that’s a normal thing? Or should I be worried?

[@mrmidnight32]

Luke Scholey it’s normal for all Fords from the early 90’s to early ‘00’s. The PS pumps in all of their cars trucks and SUV’s from the time whine weather the pump is are good or bad. Don’t worry about it at all. All of them have it. If they don’t they will sooner or later.

[@gravitygear]

That's the supercharger...

[@Fyc1x3x8]

Luke, flush it with and refill with ATF.

[@FuknJulian]

@@Fyc1x3x8 does any atf work?

[@chaseowens1122]

Makes me miss my rangers. My 94 had the I-beams and I can’t believe how much I take them for granted now that I have a 16 Silverado.

[@jaredalexander3403]

Haha you an me both I wish my ranger had I beam.... I'm stuck with the tbars

[@lynndempsey4096]

Now you have a piece of shit!!!!

[@davidthomasnewman]

Gorgeous build, love the front end and how clean that chrome/lights/hood look w the stance. Great job!

[@MxGuru1]

awesome work. cant wait to see what you brothers will build in the next 10 years.

[@Fit4C]

Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell

[@cjdoig45]

I really enjoyed the ranger build guys. That steering setup is cool.

[@manny1584]

The Ranger came out sick can wait for part 2. 👍

[@jordanm5317]

We need more youtubers building prerunners like you!

[@themountainraven]

Hey guys just found your channel, so far awesome, for a backyard operation you guys are doing some impressive stuff. Don't be scared to throw in more detail with videos, some of us really do like knowing all the ins and outs of builds. 👍

[@Fit4C]

Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell

[@edwardfast4525]

You guys rock I've been working on cars in size age 14 M 52 and I wish I could fabricate like you guys to do you guys are awesome

[@zimmzttocs]

Nice build.. Can't wait for part 2

[@angelbernes7585]

Nice and solid build!! Thanks for sharing.

[@billhicksmcgee1181]

Pretty wicked bend in that steering rod, i always double wall or gusset rods that need that much bend. Cool little front end though, love rangers

[@jacereif1293]

Please!!!! Do the short course link set up! I’m looking forward to that build

[@WingsWorldChannel]

This summer!

[@addicted4life575]

You got some sweet welding skills!

[@jeffreyneely4464]

Put a 5.0 from an explorer in it

[@betosworld4793]

Always look forward to these videos. Nice fab work.

That Ford Ranger looks awesome!

[@chriswalker5729]

Im not gonna lie...saw the LS in the 150 and thought "oh no, more of these guys". Then I saw your haircut and rolled my eyes. But out of curiosity, I clicked more and more videos. Not ashamed to admit I was incorrect in the "swap parts guys" category in which I put you. Your skills are above the hacks I thought I was going to watch....and not once did I hear "bro bro bro bro..." in the video. Keep it up.

[@WingsWorldChannel]

glad you changed your mind and came back!

[@chriswalker5729]

@@WingsWorldChannel your content is what made me change my mind. How many people do you KNOW first hand would not have taken the time to square the tire hold down? Good enough for some, but you made it the correct way. Keep it up.

[@low87dawg86]

Pretty legit. Not a fan of the LS swaps when you can just use a chevy for your build instead but yall have talent. Sick builds.

[@kg2995]

legit ranger build. Keep on rollin out builds.

[@minor805]

Ah-Siiiiiiiiick dudes! 🤙🏼 y’all knocked that out a lot faster than I expected. Flexing on em already. Rad channel u got goin fellas. Keep it up.

[@WingsWorldChannel]

thank you!

[@ensogm68]

Excellent work

[@wesjohnston1968]

Your work is clean man. Super sick 🤘

[@ironhyde8385]

Good lord I have a 96 regular cab short box and it would be awesome to be able to do that to my truck. I love your guys work.

[@boyo.s]

i have a 2000 ranger, you have no idea how much of a relief it is that all of them have the same PS whine

[@Ronin_4130]

Killer work 🤙🏻🤘🏻

[@CashedOutCars]

Sick build man! Great fab work!

[@CRIBBSSTUD]

loved the build brother, if you guys keep up the good content i give it 6 months before and youll be at 500k subscribers!

[@masonchristian4432]

awesome truck - awesome content

[@joshmellor939]

You guys should do a tutorial for pulling bedsides!

[@Nathan8rr]

Really cool build you boys do good clean work 👍🏻

[@xTinBenderX]

Can't believe y'all only have 4k subs??? You guys do outstanding work!!!

[@WingsWorldChannel]

thank you!

[@harp120]

Настоящее технопорно))) автору иногда так и хочется врезать по плечу и сказать: - пля да подвинься ты ! Машину не видно!))) Красавчики ! Красиво тачку собрали!

[@TheMrWolfSkull]

Wow, Thats impressive. I would kill to have somthing along the lines of a prerunner style build done to my 2001 extended cab dakota sport 4x4 4.7L Magnum. One day i hope to have it built like that ranger that would be such a sick time.

[@nwhuckin7761]

love it. looks good

[@uzileopard6199]

Doing a build myself, they are a piece of work

[@xjflips6989]

Y'all did an awesome job on it. Love the work you guys do.. so here is the question... this particular set, what's the cost? I have a 94 ranger with a 4.0 I'm starting to tinker pre-runner ideas.. 😁

[@cgr88m]

Id like to see one with a ecoboost swap from the mustang, those lil 4cyl have nice torque once tuned.

[@jakunlimited4143]

To keep the bed from hitting, try lifting the bed up and adding your own body lift to it. Fabricate about 4 steel cubes with holes in the center so you can mount the bed back on, and weld them to the frame. So not only do you have a homemade lift, but also enough space for less rubbing

[@marcelnunez3525]

hell yeah

[@Str8sixfan]

I'm a sucker for twin i-beams as pre-runners. You do some tremendous work. Definitely subb'd.

[@derekhussey9467]

Looks soooo good. What material did you guys use for the front skid plate? Thanks

[@WingsWorldChannel]

it is 3/16 5051 aluminum!

[@jamesmerkel9442]

looks like plumber built it not designer ugly, but form follows function in fab department. An apprentice plumber in training(simple is fine/good enough, post & beam still works but we usually cover it up in NOW).

[@joshuaavalos213]

I wish I had a welder to do stuff like this to my truck.

[@jesseeades1434]

I wouldn't weld like them. Those are some really bad welds. And only spot welding joints? Its like they want this to fall apart the first time it goes off road.

[@jesse0376]

Nice build

[@davidsferrazzo]

You guys are a SOCAL version of Grind hard plumbing co. Y’all are great

[@kevinlokitsjr6820]

Ranger over everything 🙌🏾 thats wassup

[@tyler238]

Nice dude

[@michaelchristopher9444]

Man you're a talented fabricator. Jealous of your metal working skills.

[@elcompajr664]

Nice prerunner strong truck

[@seanmclaughlin2283]

Keep up the vids your guys content is great👍

[@adanandresalmaraz5656]

How much would you charge to do it on my ranger? I’m serious deadass bc it looks really good

[@kylerebbin6797]

Do u guys use a tube notching jig? Those notches were on point good stuff

[@WingsWorldChannel]

yep! JD notcher

[@pacocoglaiti621]

how much did you lift the truck? i am turning my ford ranger into a prerunner and i love how yours came out

[@tonybarker118]

I have a question what what do I need to know on using f-150 ibeams on a 97 ranger 2wd I like the set up on the green ranger u did thanks for your information

[@FrankieCoyazo]

Cheee!! Sick ride!!!!!

[@kyleosbun]

What was done to the rear end then? Just stock with better shocks or what?

[@joebarron396]

Hell yah Ryan looking sweet

[@jamesmerkel9442]

U should get close up picks of your build outs or ref & so ppl can see diff styles & systems at a quick pic pnt example. U will b able to see your progress as well.

[@dieselburner4461]

Does having equal length beams make the ride height a lot lower? Looks like it has a low stance . I could be wrong

[@prestonblaineroddam7986]

Would look clean with the McNeal racing raptor fiberglass front clip and bed sides for the ranger

[@wileyrileyrc9371]

hey between the suspension kit shocks and tubing etc how much do you think this whole thing cost

[@intrinsiccinema7374]

what are those 2 rings on the front hood of the truck looks cool

[@michaelvelez9995]

I'd love to know what exactly did he do to "massage" the chrome grille to fit that Ranger. I have a 94 that I wanna install a 97 grille to but not sure how to go about getting it to fit.

[@abramspearman9046]

It’s probably going to be considered a lethal weapon now.

[@user-nk5tz8ox1t]

By any chance can you tell me how you got the nike swoosh lookin thing off cause im trying to to take it off but its all welded on from factory

[@davinheil6316]

Hey man I’m actually building my ranger right now and need some help with ideas and such would you be able to give me some advice? Would really appreciate it

[@montanamoments9989]

Good videos man. Just found your channel and def subscribed. Keep up the good work

[@mattleonard5268]

Next is getting rid of the power steering whine lol! Is that a 4.0? That’s a lot of power for a single cab ranger!

[@jeffreycaves2756]

What size are the wheels and tires on this truck? Great content guys!!

[@WingsWorldChannel]

15" Wheel and 33" tire!

[@ericlinck6664]

Very cool!

[@stryker4240]

Sick bruh!

[@kerbalman7636]

I love the SAH dudes greeting at the beginning. Sad to see it go.

[@tionacho5753]

Hii, how did you install the steering wheel?? where do you buy de adapter??

[@devinwilkison6799]

What part of Cali are you guys located? I’m in the Central Valley near Fresno. I just bought a Colorado with a orettt crazy setup. I honestly dunno much about it, how capable it is and I also would like to meet up with some other prerunner trucks and enthusiasts some time!

[@richgenovese120]

What did you use to coat the suspension?

[@scottsmith5529]

Where did you find your aftermarket fenders?

[@juniorlett8094]

Quick question for you guys what year is the grill for the ranger I have a 93 same color sup it’s a 5 speed

[@JJBanuelos]

Awesome job! What are you using to bend your metal tubes?

[@samweems5310]

What tires are you running? Looks like ko2s?

[@tonymarinaro8958]

How many feet did you guys use to build that bumper

[@DMrider09]

You guys should do a late model Ranger !

[@ArtsWrld]

Dude! What a great build so far . I dream that my 99 ranger looks like this . Is it ok to ask for a parts list for what was done to the front? Big fan so far, just subscribed . 😎

[@joshuaherrera2654]

What size tires and rims are you running? Looks great!

[@WingsWorldChannel]

15" rim, 33" tires!

[@chielgerritsen9026]

just found you but good quality vids and fun

[@rorysurf]

where do you get your control arms and suspension??

[@WingsWorldChannel]

the beams are built by camburg, shocks are built by king and bought through downsouth motorsports

[@rorysurf]

@@WingsWorldChannel sick! thanks for the reply!

[@Jcat2168]

How much do you charge to build a front suspension like that on my ranger?

[@silvestrebravo5407]

Whats that cost build?.....Interested!

[@soppingwetburgers6493]

Where did you learn to do all of this?

[@bingstonrogers8863]

Where did you get the entire suspension system ay

[@bradykazuska1301]

What’s the green piece under the headlights called ?

[@vallero7607]

Nice truck bro.

[@nicolec7290]

Good tires

[@johnfinney8700]

What did this build end up costing, I’d kinda like to make my own now lol

[@eastonruppe5730]

Should get S&B cab mounts

[@HarleyStuntReview]

How much would something like this cost to be done?

[@aocimmortal]

Love your vids I’m trying to post content like you guys 🙏

[@ambrizomar69]

But how did you make the I-Beams ???

[@cee5773]

Where did that grill come from