Tap to unmute

Fire Engine Relief Valve Pt. 2 (Pump Series - Part 9)

  Рет қаралды 11,434

Roll Steady

Roll Steady

Күн бұрын

Пікірлер: 15
@nessfittraining9679
@nessfittraining9679 6 ай бұрын
I understand setting the relief pressure at the highest pressure line but if you fit that line down won’t the lower psi lines spike up the pressure that your highest line is set at?
@TheRollSteady
@TheRollSteady 6 ай бұрын
You are on to something… and why gating lines down can be extremely problematic. This is why Rick Brewer advocates for utilizing multiple engines and setting up pressure zones for each apparatus to function in.
@ericfeatzka648
@ericfeatzka648 4 жыл бұрын
Can you set the relief pressure just circulating water back to tank? Or is it best to set when flowing a hand line?
@TheRollSteady
@TheRollSteady 4 жыл бұрын
Good question. Personally, I prefer to set the relief valve with a dedicated discharge. A side note is to test different relief pressures as you do your morning check out.
@ericfeatzka648
@ericfeatzka648 4 жыл бұрын
@@TheRollSteady Thank you
@kaelynhess8049
@kaelynhess8049 3 жыл бұрын
Where is part 10 of this series?
@TheRollSteady
@TheRollSteady 3 жыл бұрын
I had to pull some of these down. I’m in the process of re-doing this entire series though. You might be able to find the original episodes I pulled down still at therollsteady.com in our Pump School with Rick Brewer.
@donpietro5819
@donpietro5819 3 жыл бұрын
Hello I hope you are well I work in an oil company I am a fire truck driver I have a problem with the truck in the control panel when I accelerate the pump with the start button not I think because that discharge relief valve please help me
@TheRollSteady
@TheRollSteady 3 жыл бұрын
Sorry Don, I’m not sure what exactly you are asking.
@donpietro5819
@donpietro5819 3 жыл бұрын
@@TheRollSteady you have an email or Facebook to send you the photos and understand me please
@TheRollSteady
@TheRollSteady 3 жыл бұрын
@@donpietro5819 look up Roll Steady on Facebook
@jesusleon3493
@jesusleon3493 3 жыл бұрын
@@TheRollSteady Good morning, could you explain to me how to configure my relief valve, thank you very much in advance
@TheRollSteady
@TheRollSteady 3 жыл бұрын
@@jesusleon3493 join us on Therollsteady.com I will be putting out a video on setting your relief valve in the next couple month or so
@christopher9975
@christopher9975 2 жыл бұрын
How the heck does this guy write backwards so easily?
@TheRollSteady
@TheRollSteady 2 жыл бұрын
Lots of whiskey
Fire Engine Tank [re]Fill  (Pump Series - Part 11)
5:04
Roll Steady
Рет қаралды 33 М.
Water Intake on a Fire Engine (Pump Series - Part 4)
4:04
Roll Steady
Рет қаралды 17 М.
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
6. Pressure Control Systems - Jay's 6-Part Series
17:58
WATEROUS
Рет қаралды 34 М.
Urban Pump Series (006) - Intake Manifolds
5:53
Roll Steady
Рет қаралды 4,1 М.
The Basics of Dual Pumping (Pump Series  Part 24)
3:25
Roll Steady
Рет қаралды 16 М.
Pumping multiple Lines & Setting the Relief Valve_2of2
9:53
fireresq7
Рет қаралды 98 М.
WATEROUS - Discharge Relief Valve
6:44
WATEROUS
Рет қаралды 70 М.
German Tools - Scrapyard Treasure Trove! History and Restoration!
31:54
The Post Apocalyptic Inventor
Рет қаралды 76 М.
Hand Method for Calculating Friction Loss for Firefighters
8:23
Matt Hinkle
Рет қаралды 124 М.
The Basics of Series/Relay Pumping (Pump Series  Part 25)
3:35
Roll Steady
Рет қаралды 22 М.
The LARGEST Thing We've Machined in 60 years (It's Too Big For The MEGABORE!)
28:48
HAL Heavy Duty Machining Australia
Рет қаралды 109 М.
Friction Loss 101 (Pump Series - Part 15)
8:08
Roll Steady
Рет қаралды 18 М.
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.