OTEN Maritime Studies shows you how to put out an oil spill fire using Dry powder and then foam to make sure it stays OUT.
Пікірлер: 35
@izzzzzz66 жыл бұрын
I noted how difficult it was to relight the foam smothered fire. However i also noted that the second time it took much longer and the fire might have burned a great deal of the fuel by that point. Especially as fuel had been burned two times already from both of the tests. Not to mention evaporation or possible drainage into the ground. I'm sure the point was valid it's just that the lack of control in the experiment/test could have made the test look more effective that it should have been when it came to trying to relight the fire. Generally it's just me having a problem with holes in statistics. Good video, very informative.
@tulius0112 жыл бұрын
Looks like a combination of powder and foam is the optimal choice. Powder for fast extinguishing the fire and than cover the area with foam to prevent reignition.
@Xanthopteryx6 жыл бұрын
That's how fire crew do it sometimes on car fires: First water to put out the fire and then foam everything to prevent it from reignite.
@awkwardmoments15396 жыл бұрын
That is where retardant comes in (the pink substance)
@Lordoftheflamesissketchy3 жыл бұрын
@@Xanthopteryx my fire bridge did that on a car fire
@blankphonk48892 жыл бұрын
or just foam with more pressure. that can was weak af
@Lordoftheflamesissketchy2 жыл бұрын
@@blankphonk4889 i know right lol
@severedarterie12 жыл бұрын
AFFF is a great option.
@OfficialIMVUMusicVid12 жыл бұрын
foam takes forever
@Mrcheesydancer10 жыл бұрын
foam was slow as hell
@ThatDamnPandaKai9 жыл бұрын
Mrcheesydancer With how long it took, and the camera-changes, I wouldn't be surprised if the foam ran out and they had to get a second one.
@kota11558 жыл бұрын
+Princess Lemmy that's what I thinking like is the foam gonna be enough
@AjiinKun8 жыл бұрын
nahh, foam does work well on jet fuel though...
@lightskinfirebrianna11015 жыл бұрын
I know right and what happen when its a bigger fire that will never work
@m.akashiqbal97397 жыл бұрын
Foam is made up of which material? Can anybody tell .
@andison6276 жыл бұрын
M.AKASH IQBAL Most foam extinguishers are AFFF (aqueous film forming foam) - they use surfactants in a water base to float above the fuel and suffocate it.
@Fredengle2 жыл бұрын
@@andison627 but those chemicals cause health problems ( it was named in a lawsuit !)at this point if the foam concept was belived to be a good idea so they are trying to designed safer version it seems
@nickpDK12 жыл бұрын
he is not using the powder extinguser proberly but wtf it worked :P
@LAHFSI11 жыл бұрын
The US navy had twin agent system for shi
@IMightBeIris2 жыл бұрын
*Before you do anything to FIGHT or extinguish a fire, call 000 for the fire brigade and evacuate everyone.* *Do NOT* breathe the by product fumes from the fire. *Do NOT* breathe Dry Chemical powder dust. *Do NOT* tackle a fire without first evacuating personnel.* If the fire is too large, *Evacuate.* *DO NOT* attempt to tackle a large fire. *If using a CO2 extinguisher, Evacuate the space - Danger of Asphyxiation. Do not hold the horn or cylinder - Danger of frostbite.* *If using a HALON extinguisher, Do not use in a confined space and evacuate at once as soon as the fire is out - Risk of poisoning.*
@iamyouu7 жыл бұрын
Unless it takes such a damn long time, and not very trustworthy too.
@ShyGuy191910 жыл бұрын
Good for fires, bad for shooters.
@lightskinfirebrianna11015 жыл бұрын
That takes to much time and it will never work if that fire was bigger and or a lot of them for that matter
@aphrodence023 жыл бұрын
Much better to use dry chem, then foam. Base on this video
@Skibbi1982 жыл бұрын
If the fire was bigger, you wouldn't use an extinguisher.
@wcresponder12 жыл бұрын
COLDFIRE.!
@Fredengle2 жыл бұрын
yeah! I got rid o my foam units and now have cold fire did you know about the afff lawsuit?
@wcresponder2 жыл бұрын
@@Fredengle No...do tell?
@Fredengle2 жыл бұрын
@@wcresponder lets see if I can find a link : here an an examply but you probably should seek out addtional youtube links : kzbin.info/www/bejne/fHq4ap-re9qqias
@Fredengle2 жыл бұрын
@@wcresponder of course the reason I switched to cold fire is it is a surfactant type that is advertised as an alternative to halon I think we are pretty sure that cold fire is a great product is why Nascar and the irl like it because it does not damage engine parts like dry chem will so its probably also easier in my home to clean up a liquid than a powder even if the powder it seems does not stick it still seems it can be diffcult to clean