Testing of Fire Hose Reels System: kzbin.info/www/bejne/eHW3o5tnmdJmrpo
@deepakshah89424 жыл бұрын
Good job dear sir. Sir Apke Dwara bahut Kuch sikhne ko milta hai. Thanks.
@TanweerAhmed4 жыл бұрын
Welcome Deepak
@rehanzahid75913 жыл бұрын
@@TanweerAhmed bro what is the working pressure of hose reel nozzle as water is pressurised inside the pipe upto 12 bar & what is the water throwing capacity of a hose reel (in meter) & Hydrant as well?
@TanweerAhmed3 жыл бұрын
@@rehanzahid7591 Watch my next video about Testing of Hose Reel Practical you will get information. However, Hose Reel max flow is 100gpm, Working pressure minimum 65psi and maximum is 100psi as per NFPA-14
@zakirullahzakir65694 жыл бұрын
Awesome video, as usual. Now the next video should be about different types of Fire sprinkler systems i.e. Dry pipe system, Wet pipe system, Deluge System and Pre-action System, etc
@TanweerAhmed4 жыл бұрын
I have already uploaded video about TYPES OF FIRE SPRINKLER SYSTEM kzbin.info/www/bejne/f5CxZGVvn5qsmbs
@taqirkan7712 Жыл бұрын
Also, on onw site, i witnessed that breeching inlet is placed before the UGWT, so that in case of breeching inlet activation, the water from breeching inlet be first going to ugwt and fom their to pumps...is it an ok practice?
@TanweerAhmed Жыл бұрын
Breeching inlet should be connected with discharged side of fire pump as per NFPA 20 requirements.
@setyopermadi265426 күн бұрын
Asalamualaikum sir Tanweer, is Fire hose can be change with Fire hose Drum...and is fire hose drum allowed installed based on NFPA
@TanweerAhmed26 күн бұрын
Not allowed
@hemalshah40494 жыл бұрын
Very useful videos. Thank you sir. Please keep uploading such videos.
@TanweerAhmed4 жыл бұрын
Thanks
@motivationalquotes2.5m84 Жыл бұрын
Fire hose reel koun sa pipe se connect karte hai main line se ya branch line se
@TanweerAhmed Жыл бұрын
Connect with standpipe
@alisher95284 жыл бұрын
Good video
@abdulwahidkhan41014 жыл бұрын
Zabar 10
@TanweerAhmed4 жыл бұрын
Thanks
@mrj80124 жыл бұрын
Nice clip
@TanweerAhmed4 жыл бұрын
Thank you
@amitkhedekar84732 жыл бұрын
Thank you again Tanweer Ji. What is the standard size / dia. of the hose ? Request you to make a video on different types of fire, heat detectors, indicators and their uses.
@TanweerAhmed2 жыл бұрын
Dia 1", 1.25" and 1.5"
@amitkhedekar84732 жыл бұрын
@@TanweerAhmed These different sizes are used according to the hazard ?
@TanweerAhmed2 жыл бұрын
Normally used for light & ordinary hazard. Design for dia 1.5" and provide sizes as per NFPA design different conditions
@abduljabbaransari84624 жыл бұрын
Great
@TanweerAhmed4 жыл бұрын
Thanks my friend
@shamsadmohad93144 жыл бұрын
thanks Sir
@TanweerAhmed4 жыл бұрын
Welcome
@0xRizwan4 жыл бұрын
Pls make a video on design calculations of fire fighting system
@TanweerAhmed4 жыл бұрын
Ok noted
@0xRizwan4 жыл бұрын
@@TanweerAhmed Thanks sir.
@mohsinzaman22124 жыл бұрын
Sir ap ny fire hose reel k bary ma jo btaya h os ma 60% to fzol e tha ap ny main batain to bech ma chor e di k fire hose reel auto or manual hoti hyn . Ap ny hose reel k andr ka systm ni btaya . Nozzle ki bt ap ny ki to js nozzle k opr valve ho ga wo pani sedha phenky gi or js ko ghuma k kholna ho ga ya js k opr valve ni ho ga wo pani ka spry b kary gi. Ap function btain thickness ko hm logon ny kya krna h wo to client ki mrzi h jo Meterial mangwa k dy aj kal wesy b NFPA aprroved hose reel ati hyn .
@TanweerAhmed4 жыл бұрын
Ok noted and thanks
@hadinadeem35254 жыл бұрын
Brother ek engineer ko A to z pata hona chay thickness..size..dimensions..sara knowledge great ha. Keep it up tanveer bhai
@TanweerAhmed4 жыл бұрын
Thanks
@taqirkan7712 Жыл бұрын
Assalm O Allikum Tanveer Bhai...will the valve for fire hydrants be in Normally open or NC mode....some one was mentioning that the valve will be open and in case of fire the fire pumps will start working...however, i think that valves should be in NC position and the line should be pressurized...in case of fire the valve be opened which will result in pressure reduction and will eventually lead to FF pump running to ensure pressure is maintained in the line...plz advice
@TanweerAhmed Жыл бұрын
If you are talking about fire hydrant which are installed normally outside of buildings or road walkway. There are two valves, one valve is in pit on branch that should be opened and another valve is built-in in hydrant that should be closed.
@taqirkan7712 Жыл бұрын
@@TanweerAhmed both are NRS gate valves? Thanks
@bharatsakre71293 жыл бұрын
sir please suggest any book firefighting desine
@TanweerAhmed3 жыл бұрын
I have to learn fire fighting design, if any book found you then share me also
@TanweerAhmed3 жыл бұрын
Someone has shared pdf book of firefighting design in my WhatsApp group. You can receive
@bharatsakre71293 жыл бұрын
@@TanweerAhmed sir your group is full please aided my number 7828757210
@etidoeyo99534 жыл бұрын
please how do i fix disc to the hose reel
@TanweerAhmed4 жыл бұрын
So simple
@afsarmahaldar69114 жыл бұрын
Watercurtains par kuch
@TanweerAhmed3 жыл бұрын
Ok noted
@hadinadeem35254 жыл бұрын
Tanveer bhai ap kahan say ho
@TanweerAhmed4 жыл бұрын
I belong to Sindh, Pakistan
@hadinadeem35254 жыл бұрын
Both he great experience ha bhai ka. Keep it up brother
@hadinadeem35254 жыл бұрын
Sindh k kis city say hn ap ?
@TanweerAhmed4 жыл бұрын
Shikarpur
@hadinadeem35254 жыл бұрын
Main Rahim yar khan say hn. Or Rescue 1122 main as firefighter kam kr raha hn . Agr ap say related to fire information leni ho tu plz apni koi mail ya contact dein .taky ap say rabta ho saky