Fire pump operation | fire pump room | fire fighting system | Tamil

fire pumps operation
#firepump
#firefighting
#jockeypump
#electricalpump
#dieselpump
firefightingsystem
• Fire pump Room Tamil |...

[@vasanthduch4595]

Thank you bro tmro enaku interview Erika Unga video helpful’a erunthuchu❤❤

[@knowyoursafety2040]

Super , thank you for your valuable feedback.

[@knowyoursafety2040]

Iinnoru fire pump room video irukkum athum parunga

[@Gowtham-mt3yi]

Pre Auction system pathi sollunga Anna

[@knowyoursafety2040]

Pre action system LPG tank ku use pannuvanga, open and close sprinkler type irukkum

[@knowyoursafety2040]

Oru video podalam

[@asisrajad3659]

Bro fire pump and diesel pump rendum different flow rate la irukalama? Like fire pump 188 m3/hr and diesel pump 137 m3/hr. Enga plant la nanga apdi tha install pannerukom so again vera plant la install pannanum nange ithaiye follow pannalama?

[@knowyoursafety2040]

Correct tha flow rate different ah irutha pressure drop la difference romba irukkathu.. Delivery line diameter ku evaluation water tha varum so pipe diameter nu pakkanum

[@knowyoursafety2040]

Depends on design as per requirements, build height depend panni design pannuvanga

[@tamilselvan8924]

Hydrant charging procedure

[@knowyoursafety2040]

1. Locate the Hydrant 2.Inspect the Hydrant 3. Connect Hose 4.Open Hydrant Valve 5. Flush the Line 6. Charge the Line 7. Monitor Pressure 8.Test Hydrant Operation 9.Disconnect Hose 10. Ensure valve are closed 11. Record Information

[@knowyoursafety2040]

1. Find the hydrant. 2. Check it for damage. 3. Attach a hose to it. 4. Open the hydrant valve slowly to let water flow into the hose. 5. Flush out any dirt or debris. 6. Fully open the hydrant valve to fill the hose with water. 7. Check the pressure. 8. Test the hydrant to make sure it works. 9. Disconnect the hose when finished. 10. Close all valves and secure the hydrant.

[@p.k.gopalkesavan4785]

Pipe line charging eppadi

[@knowyoursafety2040]

Good question... Normal tha... Line empty la irukkum pothu, line la air irukkum, so electrical or main pump ON panni... Line la ulla air release panna pothum

[@knowyoursafety2040]

Air release correct ah pannanum... Illa na air lock aayidum

[@knowyoursafety2040]

Charging a fire hydrant process 1. Find the hydrant. 2. Check it for damage. 3. Attach a hose to it. 4. Open the hydrant valve slowly to let water flow into the hose. 5. Flush out any dirt or debris. 6. Fully open the hydrant valve to fill the hose with water. 7. Check the pressure. 8. Test the hydrant to make sure it works. 9. Disconnect the hose when finished. 10. Close all valves and secure the hydrant.

[@knowyoursafety2040]

Neega line la water charge pannurathu kettingala illa hydrant line charge pannurathu kettingala