Fire Retardant Paint

Fire Retardant Paint, FX Paint Guard, Class A, Non Toxic, Latex Paint, Great for Drywall, I-Joist, Plywood and more. Contact FRCT for more info.

[@teejay622]

Too many variables in this test. Two different torch types and the distance from torch to surface is different as well. This test needs to have one torch pointed at the surface where the treated and untreated surfaces meet. This eliminates many of the variables. Torch type, torch temp, gas bottle contents as well as bottle gas pressure, distance from torch to surface, etc.... I'm not hating - I'm honestly both impressed by AND interested in this product. I'm just OCD when it comes to product demonstration and comparisons. I would also have a camera shot of the back of the surface and maybe even a temperature sensor to show the surface temp of the reverse side. Just sayin.

[@derekalbright3128]

Not just the contents, but he flips the picks up the painted side burner half way through the video, while he leaves the other burner angled upward. The different angles makes it so the untreated side looks worse. I'll be avoiding this product if they have to fake flames for their marketing.

[@coulterjb22]

@@derekalbright3128 And the treated-side flame starts moving around. I like the idea of the product but if it were me I wouldn't have posted this. not a fair test.

[@netzerolife]

Hey Tee Jay, I watched this the other day. These other guys hired scientists and put in proper instruments. I liked this video because they bunt two entire houses down. Worth checking out. Pretty awesome to watch a three story building flashover. wwww.barriertek.com/sciencevsfire

[@hazelwood55]

It may not be exact, but there is still a flame on it that goes out as soon as it is taken away. I consider that quite impressive. Attics have bare wood, when flames get in an attic the house is doomed. This needs to be on all attic surfaces

[@BigRandomEyebagWaggerYo]

For me, this is the best kind of paint that must put on cars, and kitchen, home, condominiums and mostly on some industrial/factory companies. Thanks for making this kind of helpful stuff. 🥺☺️😍

[@puffyelvis5895]

Product looks impressive, don’t short change yourself by using unscientific testing methods in this demonstration. Make identical setups and using both fire retardant and non fire retardant paints. You don’t even need to talk, just time lapse the results and do a double blind crossover style test.

[@CristianoBonavolonta]

The product looks great but I would use the same blow torch type for the demonstration. Above all a setup with blow torch's flame at a consistent and equal level from same distance would be better to see how well the paint works.

[@johnathany6537]

Very interesting video the only thing I found off is both propane tanks aren't the same and don't know if the both temperature is coming off of them are the same.

[@jairogurgel3059]

Estou escrito apos des anos que se passrao no seu tenpo pos so agora pute ter minha curiosidade sionada pos nos aqui mo brasil nao temos estesconhesimento pos a mim muito interesa pos gostaria muito de aprender com voce pos se puder trascrever para portugues voce usou uma tinta ou uma massa que foi apricada na madeira sei que nao tenho comesimento mas gosto de aprender pode me emsinar para aricar en minha casa pos dias piore tende a vir como forma de calor e gostaria de esta preparado gratidao brasileiras aguardo uma resposta em portugues

[@GHOSTsq]

You have 2 different torches with different tips. One has a pencil tip in the other has a X foliated tip.

[@Ham549]

Yeah I'm going to be that guy... Not that I doubt your products but maybe you should use the exact same blow torch with the exact same fuel for your demonstration.

[@dattdrift]

You took the torch away 5 seconds before the other one, it took 7 seconds for the flame to go out on your product. The other was almost out in the same time.. either way it's still got its merits

[@interestingfacts7944]

I dont know much about fire, but this looks hot

[@holmesdec1]

stop using chop strand material for floor joist , structural Pine has a char rate that exceeds any chop-strand material and it does not contain glues or binder resin that add to the overall heat output. You will also have a slightly increased smoke/gas output from engineered timber when compared to structural timber framing Also in your home, if you have a fire the timber framing and or wall/ ceiling linings are not the problem, it is all the combustible petrochemical,plastics, foams, fabrics etc that you have in your home that dramatically increase fuel load.

[@ryand5352]

Other than all the other issues people commented, the angle of the torches are completely different. 😂

[@garywaters1672]

You had the flame closer to the untreated side ?

[@Alex-xh9kv]

It looks like a fantastic product but this was a highly flawed demonstration. That makes the demonstration look suspect. Like most others here, I suggest using identical blow torches, gas bottles, & make a jig to ensure the torches are equidistant from the work piece. Also, consider removing the work piece from the fire instead of removing one torch at a time.

[@Andronius_]

I can't believe he did this test in a room made of wood right on a wall lol.

[@maschked]

Does this meet the requirements for TGI floor joists in the 2018 I-codes? Can it be applied to joists before installation? Cost/linear foot applied to 12" TGI?

[@emilythegermanshepherd7425]

how about using the same gas on each side and see what happens not map gas and other side has propane can clearly see two different cylinders

[@randyrandom5702]

blu is propane yellow is map gas, i only learned this 3 days ago.

[@bencordell1965]

the untreated side is reealisng syngas from the wood which is igniting thats why the flame looks bigger

[@TymphaRedbreaduwuowo]

yeah, show how wood can catch fire leaning against more wood, real smart.....

[@kozytv4840]

What the fuck is it to ya? Mind your own

[@titaniumslug]

Ha Ha, Yeah and its the same shitty particle board material they are showing to be flammable in the very test, and they haven't even used their own retardant paint on it. And there is an electric cable right behind it. Least fire cautious fire safety video ever. At least the paint seems to work.

[@dillonbledsoe7680]

You're such a pansy did he burn any wood behind the wood mr woodwood

[@portagepete1]

Is this like painting it with dry wall compound?

[@LightGesture]

What...? It's PAINT

[@lg9828]

If The torch was the same product I will believe you 🙂

[@hazelwood55]

Why don't you put the torch on the left on your hand just to see if it is really hot?

[@charleszhou5021]

We are supplier of chemicals for fire retardant from CHINA.hope we can discuss further. thanks!

[@ed.t.hansen6499]

Need clear satin for wood paneling

[@Dannye70]

Jake says hi Nicole

[@karlditz8631]

Either way the place will have to be rebuilt

[@thesusboomerroblox6516]

More likely to not be a huge fire

[@dillonbledsoe7680]

Also gives you more time to get the hell out of Dodge. I had a friend who woke up to a house on fire. Her friend died her brother almost died and she almost died. One has brain damage. The other has a scar from punching a window out to breathe. I saw a picture they were both covered in suit. They looked black when up in fifteen minutes

[@user-gv5pp6iw5i]

NOT TESTED EQUALLY. video Shouldn't exist. flame (distances & angles) Direct contact with long flame (more flame contact exposure = faster deterioration) on "non-treated" real life situation Controlled flames (further distance @ right angle, minimal, UNREALISTIC torch test) on treated side.

[@netzerolife]

This may look a bit better. Worth the watch: www.barriertek.com/sciencevsfire

[@QingdaoJumpoverTradingCoLtd]

How to contact ?

[@junkanglaw9752]

Is that a joke that costs life? Man you gotta be taking things seriously. How about bullet proof condom, is the same concept as yours

[@-mejor-que-nostradamus-6152]

Yes smart aaasss put right side fast fire and left side slow fire .... no good video.

[@GHOSTsq]

So you're test is not very accurate.

[@athomas2k8]

Lol this whole thing in multiple ways looks rigged but ok sure buddy