FIREWALL FABRICATION: AIDYN OUR APPRENTICE IS IN CHARGE TODAY

We're going to get Aidyn (our apprentice) to make a cardboard pattern for the bottom firewall, transfer it to metal, cut it out with the plasma cutter then bead roll it 🔥
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #fabrication #firewallfabrication

[@hitnmiss49]

Aidyn will remember all you are teaching him the rest of his life. Thank you for helping this young man.

[@jimcoplan9502]

Aidyn is going to gain more skills today. Chad is a great teacher. Jolene's camera work is always amazing.

[@michaelherrmann3971]

When large companies start to send you products you know your talents and integrity are spot on

[@masonmorgan3987]

Aidan is very lucky to have u as a teacher, your very talented Chad👏🏼

[@kerrydusome9434]

I love how Jolene zooms in on Fina every now and again 👍😀

[@plank407]

It takes patience to teach, and Chad is doing a terrific job!

[@wadethomas6952]

I agree with you

[@garywheeler27]

I was about to say the same thing !

[@Stevestevesmotorbikegellvear]

Great work by aiden great coaching by you and excellent camera work by Joleen

[@plank407]

Aiden has an amazing mentor now. He is blessed with a great opportunity.

[@i8ntnuts]

@plank407 I wish we knew more about the young man. I don’t think I have ever missed a show, but I don’t recall the young man ever telling us anything about himself. Does he have a car himself, or is he even interested in cars? Are these hours just for school credit? Has he ever welded before? He seems to be such a nice young man and definitely shows some talent. It would be nice to know a little about who he is so we can cheer him on in the right direction. Will Aiden be coming back? Anyway it was just a thought I had Jolene.

[@ionedave]

I would award aiden one of your old welders, he is doing a awesome job. That way you can showcase the new welder

[@peterland7388]

Great idea!

[@leosimon9463]

I’m

[@laurencesteers9648]

Here in the U.K. there is very few places teaching welding, I was lucky and learnt at school over 50 years ago, I don’t think any schools now teach it. Fabulous opportunity Chad is giving the lad to learn a skill that could lead to a future in not just car bodywork but any welding requirements that he could earn a good income from. Thank you Chad and Jolene for not just teaching him ,but everyone who cares to watch.

[@leosimon9463]

Wonderful job teaching Aiden. There’s no better way to learn than doing. Thanks for sharing todays progress.😊

[@danobrien3109]

The way you are teaching this young man is more valuable than a thousand in class hours of teaching. Doing is the best form of learning. Teaching someone the technical formulas of pattern making with measurements , angles and calculations is so time consuming. Chads way is much simpler and obviously quicker. No doubt there will be times that you need those formulas but not all the time. This guy will learn to not over think a job and how to problem solve on the go. Lucky bugger, hope he knows it.👍👍🇨🇦

[@robertlatham8361]

It's great to see you and Aidyn working together and he is learning just fine, great job Chadders !!

[@RamblinAround]

Chad is a good teacher and Aidyn seems very willing to learn.

[@dennisbarnett1995]

chad you are an awesome teacher and fabricator..and once again jolene you were awesome in filming

[@andrewst.michael5179]

“The Man Who Has Confidence In Himself Gains The Confidence Of Others.”

[@waynegouin939]

Right on.

[@r32guy10]

True 👍

[@4675Pa]

Aidyn is lucky to have you as his mentor. He’ll be building hot rods in no time

[@larrybailey43]

Don’t forget to run some bead rolls in firewall to prevent “canning” effects.

[@tdinova]

1st fire wall made. He's a lucky young man. Usually a newbie sweeps floors and put tools away. Way to go Aiden

[@TroubadourJuggernaut]

a great teacher and a great student !!

[@stuartbradley873]

Love how you do exactly what you want to cars and don’t stick to the normal.

[@dereksimon3437]

I'm still loving everything you show about this build!

[@joedurning3275]

Woo WOO! Love watching this build. Wife and I watch every day as we eat supper.

[@ausubo50]

Now retired, I've been a car nut case all my life. Thankfully people like Chad and Jolene are helping me live up the unfulfilled. THANKS a lot.

[@RaverRst]

Nice of Lincoln to supply some equipment, just shows your making your mark in the custom car world chad 👍

[@aabartu3]

What a great teacher! Patience, compliments, and constructive criticism altogether!

[@annemensch467]

Must be easy to have a licence on cars like this in Canada ?

[@kwikslvr73]

Chads old school I love it he motivates me to get working on my projects . Thanks chad

[@craigdrenga1666]

Great job teaching Aiden the art of patterns and plasma. Well done with your patients

[@petskudahlman]

you have a good helper. learns all the time, makes a good impression

[@ghostdog1775]

You have a young professional help out there. Great job teaching him how to do things quick and right!!!!

[@edwinallen905]

I have to say this again... you are a great instructor/teacher... an apprentice's dream come true! Great job!

[@codycheney3401]

I totally agree with the cooling the metal with water. I started doing it in the 80's do get better controll with out soaking the metal and ground. Maybe its like a lot of things in this business. You do it that way because it's the way it's always been doon ? Of course I also would use my unispotter to heat schrink too so I didn't have to go get the torch and, the guys would laugh about it until they tried it. Its time we all learn new tricks and you have a ton of really useful and helpful tip and tricks. I really like the way you do your floors in runsted out cars. There is no sence to buy expensive panels when they don't fill with out a lot of work or look as good. At least I think they don't. Thanks for the tips amd your time.

[@gfbprojects1071]

Such a patient teacher. Awesome to see a great master craftsman/apprentice relationship.

[@DustyMacsGarage]

That apprentice is very lucky to be able to learn from you!

[@johnjason7204]

Chad, I wish teachers were looking in on this video...You are one of the finest teachers to show a young fellow the business of metal working relating to bodywork. You are knowledgeable, patient, understanding to a novice student without being critical to easily made mistakes...You are a fantastic man to work for....Jolene another super job of catching all the important steps without missing the point..Well done both of you

[@larryr8492]

The simplest things on a custom are taken for granted, takes time to make it look that good. 👍

[@johnbering2260]

I really like that you are taking the time to pass your knowledge to Aidyn

[@davidbyrd6154]

Good job getting Aiden involved with fabrication helps to keep things interesting and educational for him that way he won't get bored with just welding all the time

[@marlomadnessmotors3857]

Totally Bad Chad!! Awesome to see Lincoln recognize talent and a great use of their products!

[@johnwhltson5319]

You're a good teacher Chad, it's hard to watch someone do something for the first time, you tend to want to take over, but they have to learn by doing it them selves.

[@bigmatlock62]

Chad is one of the best tutors i’ve ever seen. . You could teach the world , god knows we all need to be taught!!!

[@jasonmoore5686]

May as well adopt the boy he is getting stuff done every time we see him.

[@waynegouin939]

Simply amazing. On second thought, there's nothing simple about it. But it sure is amazing.

[@rolltide5530]

I honestly love watching Chad and Aiden work like that. The part on the floor measuring the bristle board reminded me of my dad teaching how to build homes

[@JANDLWOODWORKING]

Passing on the knowledge is the most valuable gift anyone can give!!

[@codycheney3401]

I think that he did a great job today. A fence for long beads would be a great thing for anyone. A goude in front of the bead would help as well. Either way it makes you more accurate as well as faster in bead rolling. Now may be a good time to choose the engine you are going to use, With a small block chevy engine the distributer is on the back of the engine which you could apply in your design now for the fire wall instead of later ..... just saying. It just help to have a little bit of a plan. Another great day of building.

[@tony-ps4qw]

Its a happy piece of metal that lives right there!

[@matthewfocke5360]

Great instruction for the novice. The camera work is suburb. The fabrication is the best...Thanks for sharing.

[@dennisbarnett1995]

Here to watch another great segment of the greatest fabricator on the 36-49 build..and thank you jolene for your excellent filming..

[@davidtutor6763]

Awesome job to all y'all. Love watching and learning. Thanks

[@DT99race]

Nice to see Aidyn get more involved in the fabrication process 👍

[@tony-ps4qw]

When you have a project this big its smart the way your handling it in small sections, if you look at the whole project it can be overwhelming keep chipping away Chad, and Aiden!

[@darrylway4910]

Great learning curve for me and Aiden,you in the past have made bead rolling look so easy and now i know it aint. Well down to all including the camera work👍👍

[@doubleoddbs4357]

I’m so glad to see you are teaching this ! Thank you !! That’s awesome !

[@stephenmorrissey8217]

I'm looking forward to Aidyn's first build!

[@ronc6249]

Jolene we can't say it enough but you are absolutely amazing with your video skills! So smooth and steady. Keep up the great work Jolene

[@alanpaulick7815]

Well done Aiden 👏 thank you Chad and Jolene for sharing this build.

[@thatgumpfan5124]

love that ur helping the youngster become better an teaching him a life long skill

[@ohcrapwhatsnext]

Great work men...Keep up the teaching Chad. You were born to teach...

[@jimsterling4568]

I like the way you are showing Aidyn the steos og building a car step by step !👍👍👍👍👍

[@davidzalik4574]

Best teaching method is to learn by doing. Great job Aiyden.

[@goranabrahamsson3468]

Nice job , I also learn alot by watching you sitting down in my sofa

[@yapyapdotcom7774]

Aidyn Is gaining a lot of valuable experience here, something he will remember for a long time.

[@DroTrebor]

All right Aidyn! Doing a great job!

[@forthwithtx5852]

Explanation, patience, and reserved correction. Impressive teaching skills. Helps with a dude who picks things up quickly.

[@nathanbailey2489]

Fantastic having Aidyn in the shop. Love the attention to detail in the instruction you give him. As he learns I learn. Thanks.

[@richardjennex6583]

Amazing what you’re doing with Aidan he’ll never get this kind of hands-on training again

[@RockyX13]

Great to see all this knowledge and skills being passed on. Hot Rods of the future thank you!

[@fredhoman6101]

Great work,Aidyn is learning more and more every single day ,thanks for sharing

[@yamahauler7230]

Keep up the great work!!! Lovin the progress everyday

[@davidshanks8773]

Great work Aidyn is learning all kinds of skills 👍👍👍

[@pdx1jmh]

Could see Aiden’s wheels turning. Starting off right with Chad’s roll modeling. Very cool.

[@joebourque4860]

You're a great teacher chad giving the kid a chance with the tools. His going to be proud of the work is done. Great job 👍👍👍

[@805ROADKING]

Excellent job teaching and Aidyn is an excellent Student. The Slag produced by a Plasma Cutter is called "Dross".

[@Mr51Fargo]

Let's get that firewall done ... Fabrication work just never ends but the end results will be worth it

[@richardsowers6367]

Great teacher n a great student make a excellent job well done with a beautiful film director

[@williamdibruno2847]

Looks really good and it is nice to see you teaching

[@tommyw4698]

Nice to see you taking that time calmly with the teenager and helping him learn the thing the right way from the start so cool

[@donaldshortreed3011]

I am right behind you Ayden. I wish you well today and so happy you get to work with Chad and Joline.

[@ronaldschmuck3901]

Fire wall looks great, Great to see Aiden doing such a wonderful job learning,have a great night,God bless.

[@timhanson2080]

I really think it's great that you are teaching a young man to do what you do. If only everyone did the same. Great video 👍

[@poolejon1]

Learning the skills, good job.

[@rmilne439]

Good stuff teaching Aidan great job Jolene thx guys love it daily

[@matthewehmka7095]

Amazing watching you share your knowledge with an apprentice but also with the world with your KZbin channel with the help of the amazing Jolene! Keep spreading the love of fabrication with the world Chad!

[@MittenMama2]

Hey guys great job. And congrats on all that equipment. Great blessing for y’all

[@larrysours8864]

Excellent teacher with a quick learner

[@ate-updesigns9186]

Step by step firewall creation...excellent teacher and student...a little wavy but a hell of a job for the first time ..im jealous..haa...and he didn't run with the scissors...which is the name of one of my friends band...Running with Scissors...great episode..hats of to you all..Chad and jolene and Ayden

[@robodenbach7373]

The firewall is looking good. Good job on your first time with the bead roller.

[@mikewencho]

You guys do great work! Phenomenal work!!

[@lylelynch6173]

Çhad thank you for being a good teacher the young man will so much.

[@grc3029]

Looking good , team work is bringing your vision to life , thanks to all !

[@billphillips4110]

Chad you are amazing with your trust in Aidyn. That should give him a lot of confidence

[@roopcharlie6264]

Good teacher. Mine just swore at me for 4 years.

[@jerrymesser8452]

I have had to put a lot of plywood down on existing old floors that have doors and many corners. To get the plywood to fit perfect I have used regular card stock and fit it to the floor without a lot of cutting of the sides, holding it together with tape. The patterns come out with a perfect fit because of the straight edges are not cut. Too use this type of 8.5 X 11" card stock the first piece or two are taped to the floor so it does not move. After this is done the pattern does not move because all of the next pcs are taped to the ones taped down. This can be used to make fire walls and many floor pan parts. Hope this helps you speed the process up. I know it sure helps me and shortens the time to do such things....... Hope I have explained this in a way that makes sense: JWM

[@morgansword]

A willing student and a patient teacher... great combo

[@roymazac2532]

Its coming along. Thank you for sharing.

[@bigd2203snuffy]

Bead roller takes a lot of practice. Looks good for his first time!

[@gasNmudtv]

Great teaching skillz. Keep up the good work. Cheers from Ontario

[@carolyndewstow8787]

Great to watch Chad n Aidyn working on the fire wall Great teacher both my husband I watch the three of you everyday Have a happy day xx😍😆

[@MIKEH.777]

Great video today, Aden did a fantastic job for his first time on a bead roller, but he does need to learn how to cut with scissors a little faster lol.all jokes aside he did a really great job on the fire wall . Chad you are a great teacher and have great patience with everything. Jolene you always do a wonderful job at getting in there and catching what it is they are doing. Thank all 3 of you for the videos, keep up the great work and God Bless you guys.