How To Build A Workbench - The Best Way

DIY instructions how to build a workbench the best way. These simple to follow steps explain how to build a strong, sturdy workbench that will last you a lifetime.
Plus, these plans use normal everyday lumber without the need for a lot of specialty tools. Do you want to build the ultimate workbench that will stand up to the toughest jobs? This is a must build.
Website: www.firewood-f...
Materials needed:
Three 8 foot 4x4's
Five 10 foot 2x4's
Two 8 foot 1x1's
Four 8 foot 2x8's
Four 8 foot long 5 1/2'' wide deck boards
24 five inch 5/16'' lag screws - amzn.to/3E8otwp
8 three inch 5/16'' lag screws - amzn.to/3KH5Mny
32 5/16'' washers - amzn.to/3OJqHYf
1 box 1-5/8'' construction screws - amzn.to/3KHwtbp
1 box 2.5'' construction screws - amzn.to/3YEkXDA
2 box 3'' multi-material screws - amzn.to/3R25U55

[@tylerscaff3103]

Bro you even put a materials list. You’re my hero.

[@firewoodforlife]

lol no problem!

[@thehobbyfanatic4610]

Bro I am way late on this but man I built this. I searched KZbin far and wide and nobody explained it better than you. If I can do this anyone can. I have zero experience and I am not a handy guy. I recently told myself I wanted to try woodworking but I needed a bench to work on. Thanks alot man. I really appreciate it.

[@firewoodforlife]

You're welcome. That's great to hear!

[@Jizzlewobbwtfcus]

BRO! CONGRATULATIONS on getting into woodwork. I am the same as you, recently got into it too and almost finished my second project. The more you do the more you learn and the hungrier you get for it HAHA. Woodworking is an amazing skill to have as you can be guaranteed work in hard times, express your creative side, help people in need. The list goes on and on. How is it going for you up to this point since you built the bench?

[@thehobbyfanatic4610]

@@Jizzlewobbwtfcus man it’s going great! The bench is rock solid and I have completed several projects. It’s so gratifying seeing a project come to life that you made from a pile of rough lumber! Thanks for the kind words! I wish you well.

[@jons2447]

@@thehobbyfanatic4610 Hey, man, I *really* appreciate youse guys feedback on this bench. I want a work bench *SO* bad! We moved last Sep. & tons of boxes are *still* in my shop. So I can't do much until it's cleared out. As soon as I can, I'm gonna' build a bench & this looks like it. So "THANK YOU!" to both you guys.

[@thehobbyfanatic4610]

@@jons2447 yeah man you can do it. If I can then literally anyone can. Im the most non handy, non worker type dude there is. I worked all my life in an office and always called someone to fix my broken shit. I was scared to touch a tool. All because i had no confidence. This was a catalyst for me. It propelled me into woodworking. Now Ive built all types of shit.

[@philoyphilia]

This is by far my favorite workbench video. I also enjoy your down to earth, friendly, and honest communication skills. It is very comforting!

[@firewoodforlife]

Wow, thank you!

[@frequentuser360]

It's the perfect amount of information. He doesn't show him putting in every screw, he also doesn't jump over important pieces. I'm looking forward to building my bench and I'm confident it will turn out the way I want thanks to this video.

[@stanczyk3506]

these comments and this video are wholesome and what video sharing things like youtube should have

[@firewoodforlife]

Thank you!

[@joevi2593]

$223.94 for all materials at Home depot (Tax included) 07/26/23

[@samwheeler-brown7458]

Factoring I’m Bidenomics that’s around $530 now surely!?

[@crowncroyal]

I like the slight overhang for clamping. Throw some casters on that for mobility and you're sailing

[@jimherchak7505]

Glad to see I'm not the only one who likes a six legged workbench. Over that middle leg is a handy bounce-free place for hammering.

[@firewoodforlife]

Yes!

[@kevincousins7096]

Thank you so much for this video! My 22 year old son and I built this work bench together in the past week. First experience with a powered saw and impact driver for both of us. A great father/son project and it turned out great! Learned a ton and your video was just right. We will be building a second one together when he gets his first house! Next is peg board, some casters on the legs, and ORGANIZATION. : )

[@firewoodforlife]

That is awesome!

[@wordshurtyou]

Hi everyone! Just a friendly reminder, using his notch method, DONT WEAR GLOVES AROUND POWER TOOLS! Lol! First, I want to say this is an AWESOME build and one I was excited to start! I went out, got the supplies, unloaded the wood, and got right to work. I unfortunately forgot one very important thing, which was to take off my gloves! The first board I cut into on my table saw rolled forward, flung itself behind me, rolled my gripper, and the saw blade grabbed my glove and almost amputated my pinky and ring finger. I ended up with about 20 to 30 stitches. That being said, it took me about a month longer to build the work bench, but it still came out awesome! Now that I am done, I am going to make a sign for my ripped up glove. Any ideas? I was thinking something along the lines of "no gloves, no nubs." Im open to better suggestions. Lol A huge thank you to the gentleman who took the time to make this video!

[@pvtcantrell74d]

“Glubs or Nubs. Your choice.”

[@shadbakht]

List of items: 3- 4”x4”x8’ lumber 5- 2”x4”x10’ lumber 2- 1”x1”x8’ lumber 4- 2”x8”x8’ lumber 4- 3/4”x5.5”x8’ deck boards 24- 5 5/16” lag bolts 32- 5/16” washers 1 box- 1 5/8” construction screws 1 box- 2.5” construction screws 1 box- 3” multi-material screws Video: kzbin.info/www/bejne/eZ-0ZmZ3nNplp7s

[@SeerWS]

Missing the 8- 3 5/16" lag bolts

[@SeerWS]

Also there's no such thing as multilateral screws. :) It's multi-material screws

[@SeerWS]

Further update. Any time there's a mention of 1" x 1" (he also says "one by") it looks to me like he means 2x2 (which is the same width as a 2x4). Not totally sure about this one though, until I get to that stage of my build.

[@mackendw]

@@SeerWS do you see that spot on the ceiling? I know its there!

[@realyopikechannel]

@@SeerWS just starting this build and buying the wood. whats the verdict? 1x1 or 2x2? thanks in advance

[@henryamaya7940]

Just finished mine after watching this video and following your tutorial. I could not be any happier with the results!

[@firewoodforlife]

Glad I could help!

[@PatBythrow]

I completed this build in a weekend. I took my sweet time and made sure I didn't make any mistakes. That was easy because your instructions are so detailed. SOLID WORKBENCH! Thanks!!

[@edricheson]

This is exactly the bench I was looking for a father son project this summer. Thanks for doing the leg-work for me!

[@firewoodforlife]

Glad to help!

[@daveglennie8682]

I used this vid to build a workbench. The only thing I changed was the dimensions and the bench surface. I made my bench 6 feet long and 32” wide, and used 3/4” sanded plywood for the top. I’m applying polyurethane to the sanded plywood. I’m on coat #6 now and it’s building up to a wonderfully smooth, wipeable surface. Otherwise, I built it exactly to this plan. I’m very happy with how it turned out. If you follow this method and use these materials you’re building a bench that will outlast this century, and someone, 100 years from now, will cherish the workbench YOU built. Thank you very much for making this video.

[@firewoodforlife]

Thanks for watching. I glad it turned out nice for you!

[@cferro14]

I went through many, many workbench videos & decided to make your bench. Great build & very sturdy, so glad I did it! Thanks for the video!

[@firewoodforlife]

You’re welcome! It’s a great bench and it should last a lifetime. Thank you for the kind words.

[@Marco-oz5zl]

And did u make it?

[@cferro14]

@@Marco-oz5zl of course!

[@Lilbit1017]

Made this for my hubby for his bday. He was very impressed with your build and it was easy enough for my first build ever. Thank you!

[@firewoodforlife]

That is awesome!

[@9thPlasmid]

I made this! I actually made it! With my two hands! I built it from the floor of my garage up and it’s standing and sturdy! It’s not pretty but I made it!!! Thanks for the video I learned a lot.

[@firewoodforlife]

Great job and I hope you enjoy your new workbench!

[@samturner3242]

Finished this project in a couple weekends and LOVE my new bench! Thanks for a great video with nice clear instructions.

[@firewoodforlife]

Very welcome!

[@ThatCleanMT]

Hey man. Just wanted to say THANK you for this awesome tutorial. I took on this project and knocked it lit with ease, exactly how you described and now I have your awesome work table in my garage. You rock man!

[@firewoodforlife]

Wow thank you so much for the kind words and I’m happy the project turned out well for you! You’re going to love the work bench!

[@Grainsauce]

How long did it take to build?

[@ThatCleanMT]

@@Grainsauce from start to finish, about 6 hours if I remember right. It’s been 2 years and it’s still solid as hell and standing strong. I built it when Covid had jacked up the cost of lumber to obscene prices. I’m sure it’s less to build now but still totally worth it.

[@Mattreddingtonx]

Just finished building this bench. Great video and instructions. Including the list for parts was awesome! No one seems to do that so thank you. For those of you who don’t have a table saw…you can cut out the notches on the 4x4’s with a skill saw set to 1.5inches using the same method he does in the video. Great bench again. Thank you!

[@crazykay9]

Having looked at quite a few workbench builds on KZbin, I decided yours was the best for me. I will build mine using your instructions. Thanks for including the list for materials needed.

[@firewoodforlife]

You’re welcome!

[@kammysutherland7320]

Loved your videos I’m a 60 year old woman and I built two of these and just love them! I wish you would post more- I’m also building your shelf’s for my pole barn and planning on your table for your chop saw 👍🏻

[@firewoodforlife]

Thank you so much! I'm glad you like the videos and yes, I intend to post more often. It's just that darn full time job that gets in the way. I have a few ideas in mind so hopefully I'll be able to post a new video in the near future. I'm happy you love your new workbench!

[@kammysutherland7320]

@@firewoodforlife oh my gosh it’s the best!!! I am a new subscriber to your channel and I’ve clicked the bell- so when you do post a new video I will be sure to watch it. Thank you so much again 👍🏻😊

[@rodjohnson6064]

Am going to attempt to build this however there was no mention of how many deck boards would be needed nor the length to cut to fit, other than that will be able to figure the rest out. I also went thru multiple onsite potentials and yours wins the prize😊

[@kyleduckworth8790]

Finished my new work bench adopting this great design. I made this a little longer and bought 4x4 at 10ft, this was enough to include for 6 cross bracing supports. The bench is solid, does not move easily and absolutely over the moon with the results! Thank you so much for sharing this design and creating a simple but effective walkthrough on how to build.

[@firewoodforlife]

Fantastic!

[@crystalcleargame]

I built this in about 5 hours (and I am extremely meticulous and slow). I bought all the materials at Home Depot for $180. I also made a wood purchase mistake though. Instead of 2x8's for the top, I accidentally bought 2x6's. This was rectified by buying an additional 2x8 and so on the top I have 4 2x6's and 1 2x8 (on the front edge). This gets about 3 3/4 inches overlap on the front edge with a perfectly even backside! Perfect! Thanks for this video!

[@firewoodforlife]

You’re welcome. That’s great to hear!

[@SB-tm6cm]

Appreciate this video. Alot of these DIY videos are projects for "under $500" after you spend $1000 on the necessary tools.

[@firewoodforlife]

Happy to help!

[@Jcewazhere]

Very cool. Only change/upgrade I can think of is adding some pegs or something to mount a sacrificial sheet of plywood to the top. That way you can stain/paint/whatever on top without worrying about those 1x8s.

[@kylewiener6214]

I’m very new to carpentry but decided to take a crack at this as I needed a workbench in my garage. I gotta say, it came out great. It’s super sturdy and feels like it could support the weight of my truck! Took me maybe 12 hours total and if I were to do it again I could probably do it in 6. In total I spent around $200 in wood and screws/bolts. One tip l’d give is if you’re using cheap construction lumber, take the time to pick the best pieces possible from the pile. It’ll make your life a lot easier…

[@frostysnowdog]

Looks good. I have to make a new one and your plan looks easy. My old one has a sheet of hard board on top, then I made a thin frame around the outside to keep it from sliding. Now the top is smooth and flat.

[@robertgreen9113]

Thanks for the video - quick and to the point !! I decided to build 2 benches side by side .. only made the 4x4’s 38” vs 35.5 and decided to to use sanded 3/4” ply for the decking … I don’t have a table saw ( yet ) but was able to do all the joints with a skill saw ..again great video - thank you

[@firewoodforlife]

Glad it helped!

[@TheGamingVue]

Been looking for a solid workbench build for a while. Thank you!

[@firewoodforlife]

No problem!

[@SWCCfreak]

I like the idea of using lag bolts to hold the frame together and leave the bottom shelf boards free floating, means if I need to move the bench (as in a new home) I can just disassemble the whole thing into the two frames, and I would only have to unscrew the top boards, unless you went an extra step to flush fit them on top like you did the bottom boards. Would make moving it a smaller more compact job in a trailer.

[@coledavis9049]

I just finished up my build for this workbench. Looks awesome and couldn’t be happier. Thanks!

[@QuinnHemmons]

Hey, thank you for an awesome video that other folks can reproduce. Finally! Just a thought, you should include links for your parts list below the video like other creators do. It’s helpful to know exactly what you recommend, and even what a reasonable price would be for it, and there’s no harm in you getting a small commission for all the purchases your viewers make because they can actually follow the instructions! Just a thought. You seem like a decent and hardworking person, you’re practical, and you make great videos that are actually very helpful. As such, I’d like to see you succeed! Looking forward to your next video; thanks again!

[@firewoodforlife]

Thanks so much for the suggestion and kind words! I just went through today and placed some links to make it easier for everyone to find and purchase the items.

[@Tru3M3X]

Thank you!!!!!!!! So many videos with fancy tools that I don't have lol your video helped me so much! Going to build my pottery wedge top now! Thank you!!!!!!!!! I'm a female who is afraid of saws but this was not intimidating at all I'm so grateful for this video!

[@firewoodforlife]

You are so welcome!

[@samuelparsons4521]

Thanks for this awesome video, my buddy and I got all but the tabletop done in one night! Your video was super helpful and now I have a super sturdy workbench. We decided to sink our lags into the 2x4's to get some extra length into the 4x4's (plus I like how it looks). Keep up the great work!

[@firewoodforlife]

That’s great!

[@abcdefghijake99]

Just finished building a modified version of this over the weekend. Thanks for the super helpful video!

[@Eyeamsurreal]

This is the video I’ve been looking for. Straight forward presentation using typical tools and material. I never would have thought to use 1x 8s for the top, but it makes so much sense for my needs. Thank you so much!

[@firewoodforlife]

You're welcome and thanks for watching the video!

[@michaelkulman7095]

Do you mean 2x8's?

[@MrEscape314]

@@michaelkulman7095 9:29 he said they're 3/4 of an inch thick, so I don't think they're 2*8

[@michaelkulman7095]

@@MrEscape314 I don't think he's talking about the top at that point in the video though. The original comment says 1x8s for the top but I think it should be 2x8 but there are a lot of cross pieces so if one wanted to top it with 1x8 I suppose one could but most people want a heavy duty work bench with a 2x top if using dimensional lumber. The lower shelf which I wasn't referring to can be thinner, like 1x or 3/4" and the cleats the shelf boards rest on can be 1x1 or 2x2, either way, if you have the right screws or nails...

[@jamesthornton5498]

Just wanted to say thanks for the straight forward directions and for putting all the consumables in the description....made my life so much easier and mine came out as a carbon copy!! Perfect!

[@firewoodforlife]

That’s great to hear!

[@JamesKelly89]

2:45 Radial arm saw is phenomenal for doing lap joints but even fewer people have those these days.

[@firewoodforlife]

I want one!

[@knpjdad]

Just got done building this with your instructions! Thank You so much for taking the time to show everyone how to build this!! Wish I could attach a picture!

[@firewoodforlife]

Very welcome!

[@ORIGINALJRL]

I am going to build this, but I will counter sink the lag bolts so that the front face is flat and then sheet the sides and add some doors on the front with locks

[@firewoodforlife]

That’s a great idea!

[@RWMCO]

Made one very similar to this, slapped it together with 5 inch lag bolts and it feels invincible. Would recommend

[@HansHoffmeister]

Great workbench and video. Not sure if anyone mention this, but the cut you made at 3:10 is seems unsafe. Having the piece between the blade and the fence as you are pushing past the blade seems it would be a big candidate for kickback. Sorry if I am out of place as I am only into this woodworking about a year and half and still learning. Keep up the great projects.

[@Jetdrag]

You are correct, that's an unsafe practice. Do not use the miter gauge and rip fence in the same operation. If you want clean and accurate cross-cuts, a simple crosscut sled solves the problem.

[@bobbymullin1193]

Wanted to say thank you for the great video! My carpentry skills are lackluster at best and although it took me longer than you to build mine, I built this without a problem and it came out great! The only power tools I used were a circular saw, impact driver and a drill, didn’t need anything else.

[@firewoodforlife]

Great job!

[@kptnkate]

Great for novices to create an incredibly useful bench - only a couple of missing points: use cinch straps to hold the cross pieces while tacking them in; need to take the safety guards off the table saw to make the notches in the 4X4s (and I notched the lower shelf planks as well); using construction lumber makes a much less attractive but just as sturdy bench. two favorite aspects: the sturdiness, the fact that it comes completely apart so you can move it anywhere (my current house is on a ledge with about a million stairs to get up to the house, anything coming in or out has to be dissassembly-able!)

[@roadking6414]

Exactly what I was looking for - a simple, heavy-duty workbench. Thanks for posting

[@firewoodforlife]

You bet!

[@Jetdrag]

Do not use the miter gauge and rip fence in the same operation. Inviting some nasty kickback that way.

[@firewoodforlife]

Great advice. Thanks for the safety tip!

[@sprucecoastpress]

Recently gutted my garage and after watching your video I made this workbench for my new-and-improved garage! Thanks for posting.

[@firewoodforlife]

Glad I could help!

[@kramersells]

I'm pretty sure those are 2x2 and not 1x1. Also, deck boards are 5/4 (1-1/4") thick, not 3/4", so for the bottom shelf you would need 1x6 instead, which are 3/4" x 5.5" as you stated in this video. The only difference is the long edges are square vs deck boards which are chamfered. This was a great video and I'm making mine this weekend, just clarifying in case it helps anyone out. Deck boards are stronger and treated, but are 1/2" thicker than 1x6 so choose one or the other and measure correctly!

[@gordonellis3420]

Yes..! For most of us, this is all you need ...!

[@chascyr]

Thanks! Just finished my super solid workbench for my new workshop! Appreciate the video!

[@firewoodforlife]

Thank you so much!

[@maryrichards7289]

Great video, easy to follow. I just built a workbench inspired by this tutorial that made some of my more experienced carpenter friends jealous! Thanks Firewood for Life!

[@firewoodforlife]

That is awesome!

[@josenataren5647]

Wao, so true, it looks like some guys have tools to take them to the moon in order to build a work bench. Thanks mate for your video.

[@mick3para]

This looks like a fantastic build and can't wait to give it a go. Thank you so much for suppling a parts and materials list, so considerate.

[@firewoodforlife]

No problem. Happy to help!

[@egunnz1]

Built this over the past two days after work. Super informative video. Excellent first workbench. Thanks a bunch.

[@firewoodforlife]

That's great to hear. I'm happy you like it!

[@MrCbell57]

This is something I’m building today. Th an k you so much for a simple to make work bench that’s as solid as hell.

[@firewoodforlife]

I hope you love it!

[@eandatoo]

I seriously need a workbench and this tutorial is perfect. Thanks for sharing.

[@firewoodforlife]

Happy to help!

[@JayCo-1978]

Just finished my workbench and it turned out great. Thank you for this video!

[@firewoodforlife]

Nice work!

[@scottpyka2585]

I tried to make my bench yesterday and boy did I mess things up. Thanx for showing me the right way 👍

[@firewoodforlife]

Hopefully it turned out great!

[@jond1965]

Just built this today. Still have to mount the 2x8 top. All in all I am happy. Used Home Depot wood so there are some minor issues but this is a solid work bench

[@M9neyTrees]

How tall is it?

[@jacobseverson6047]

Just got done building this. Appreciate the video. Cheers!

[@firewoodforlife]

I hope you love it!

[@alicecarlson2338]

Thank you for posting an easy way to build a work bench. Hubby is making it with assistance from a friend when available and me when he isn't.

[@firewoodforlife]

I hope you love it!

[@alicecarlson2338]

@@firewoodforlife yes it's finally done and he loves it. He can't wait to start using it. His friend also made a smaller scale of it for himself.

[@FollowingTheAgees]

Thank you for the quality vid…Hubs is waiting on a saw, but got all the supplies today, so he can make his workbench!! BLESS YOUR HEART!! Great channel, btw!

[@firewoodforlife]

Thank you!

[@yorkiedanMC]

Its good to see a realistic build ! Thanks for this

[@firewoodforlife]

You’re welcome! I’m glad you enjoyed it!

[@kurtbloom]

This is exactly the video I was looking for. Thank you! Really well done 👍🏻

[@firewoodforlife]

Glad it was helpful!

[@TylerNorton302]

Thx for this video, just built this bench today. The worst part was notching out the 4x4s. Wish I had a dado blade on my table saw for that part

[@georgedavall9449]

Thoroughly enjoyable video. I must concur with all the positive comments already posted, in here. Your approach and non use of fast forwarding and obnoxious background music, is welcome! I might add that for those without a table saw, a skilsaw can accomplish those dado cuts. That bit of joinery, if done right, is what adds to the rigidity and strength of your bench. Stay safe and Healthy! 👍😁✌🏻🇺🇸

[@firewoodforlife]

Thank you for the kind words and I'm glad you enjoyed the video! Excellent advice for those who don't have access to a table saw.

[@sergiomonohoma.]

Finally came across a video of how to easily build a work bench!!! Great work my friend! This is what I'm going to do! Thank you!

[@firewoodforlife]

You’re welcome and I’m glad you enjoyed the video!!

[@armystrongmom]

Just wanted to say thank you for the awesome ideas! Built a 44”w X 34”H x10’L table !!!

[@firewoodforlife]

You’re welcome and I’m happy to help!

[@billyrichardson1215]

Just finished mine, I have watched many videos to find the right workbench for me, and this one was it. Thanks for sharing your knowledge.

[@firewoodforlife]

You’re welcome. I’m glad the video helped!

[@jeffawatson]

Thanks for being so informative, great job to follow!

[@firewoodforlife]

Glad you enjoyed it!

[@christophertate8457]

I plan to build this soon for my sons new house and basement. I might add a back part with a worklight. Thanks for the idea. Its a good plan

[@firewoodforlife]

You’re welcome. Happy to help!!

[@SheltiesRule49]

Just seeing this. Great deal. Great ideas that I can use on my next work table. Thank you for your good video!

[@firewoodforlife]

You are so welcome!

[@Rubsam03]

Built it last week. Notching it out was a pain in the ass! Plus for some reason lowes had 4in lag screws where the 5in ones should have been. So i screwed 4 in already before realizing. Stupid of me to trust lowes labels. Thanks for the design. Bench is sturdy!

[@firewoodforlife]

I happy you like the finished bench!

[@antonkeys4330]

Great vid, quick and simple, no fancy equipment to display a professional look... awesome, good job... thankyou from Australia

[@firewoodforlife]

Thank you and I’m happy you liked it!

[@jasonolson6462]

Building 2 such a simple but super solid bench, so happy to find this!

[@firewoodforlife]

You're going to love it!

[@Siouxperman]

Very sturdy and easy to make thank you

[@edwardmccullers540]

I just watched your video and really enjoyed the way you explained things. Love the way you gave a list of materials needed to build this! I will definitely be doing this! Thank you so much!

[@firewoodforlife]

Glad it was helpful!

[@jeeprunnerpzzzz]

I just built this work bench today and you did a great job with telling me what I needed and how to do it! Thank you!

[@firewoodforlife]

Glad I could help!

[@jmonck2878]

Thank you very much for the how-to. I was able to use your demo to complete a shorter workbench and rolling version paired up that I can use around my garage. Both based on your template!

[@firewoodforlife]

Fantastic!

[@flipperbooch2194]

as a fellow gentleman who needed a new bench, I built this with a miter saw, table saw, and optionally used my band saw. I could have done without it, but it saved me time cutting the notches with the table saw. A LITTLE ADDITION: I added a 2x4 upright along the back of the bench as a wall to prevent losing things behind the bench.

[@universe74]

Just finished my modified length bench. Coated with linseed oil. Looks fantastic.

[@texasbtc]

I have been wondering what I should coat the workbench I'm going to build with and I think this is a great idea. Did it darken the wood a lot? Any particular brand or way on putting it on you found easiest? Thanks

[@universe74]

​@@texasbtc I used Solvable brand boiled linseed oil. Very minor coloration. Brushed on, rag to remove excess. Has a catalyst to speed up drying. Looks and works great.

[@texasbtc]

@@universe74 Thanks!

[@TriNguyen-qq5ul]

Hi your videos is the clearest explanation of show me how on KZbin really easy to understand. I'm looking to build one exactly the same thanks you bro

[@firewoodforlife]

You’re welcome and I’m happy you like the video!

[@MARSPALMA]

Thx for that awesome video - I will build exactly this type of workbench! :D

[@johnchristiansen-i9o]

Thanks for a great video. I followed your instruction. Very nice, very solid. Only the top to come.

[@josephforrest4453]

I'm just getting to the table top and the link for the 3" material screws is for "truss head" screws and they look like they're going to stick up out of the top. I just wanted to make sure I got the right ones because in the video you mention the heads being flat.

[@texasbtc]

If not too late, you want to get the flat head screws like deck screws or star head construction screws. I prefer the brand Everbilt. At HD they are called #10 x 3 in star drive flat head exterior wood screws. I use exterior screws even in inside my building. These screws you can use an impact driver to sink the head of the screw. Good luck!

[@bobhart1155]

Appreciate your posting this video as this is the perfect bench build for my shop. I'm a visual learner and your video was easy to follow and uses simple construction techniques which suits me to a tee. Thank you!

[@firewoodforlife]

Thanks Bob I appreciate the kind words! I’m happy you found the video helpful!

[@Djru4real]

This is by far one of the best build's that I've seen with detail and completed with normal tools. Thank you for sharing you have a new subscriber!

[@firewoodforlife]

Wow, thanks!

[@ADAPTIVX6GS]

Hey man! Thanks for the inspiration. I made my first work bench today and used your video as a rough plan! Great video.

[@firewoodforlife]

That's great to hear!

[@frederick2k]

Thanks for posting this! I just finished mine - using just a circular saw, cordless drill, and a ratchet. I’ve got arms like Popeye after driving all those lag screws by hand ; ) but the bench is solid as a rock. Turned out great!

[@firewoodforlife]

That's great to hear!

[@erwyyn]

That was amazing...and as far as I have watched here...this was the most informing one...thank you!🤗

[@firewoodforlife]

You're welcome and thanks for the kind comment! You're going to love the bench.

[@rev.johnpate3231]

Nice. Did it! Outstanding video! I modded by make it 4 ft, used all construction screws not lag scews, and the 2x4s. Also note the 4x4s like all dimensional lumber today, are really 3 1/2". I only could fine PT wood in a good length for the 4x4s.

[@MichaelSaucedo-h7q]

I appreciate the video. Just completed my first workbench using your information. Not exactly the same but turned out great. Would love to post a picture but haven’t figured that out yet. Thanks

[@firewoodforlife]

Great to hear!

[@bokneeza]

Can’t wait to do this project! Thank you sir!

[@firewoodforlife]

Any time!

[@paullafaele]

I have total confidence I can build this now 🧐excellent video!

[@firewoodforlife]

Thank you!

[@alphaomegawealth3054]

This will be my first project EVER. Excited.

[@firewoodforlife]

I hope you love it!

[@dougferinga228]

Glad I saw this video! I've been wanting to build a super heavy duty bench for my detached garage. So, I built most of it today! Great design and great video! Thanks again!

[@firewoodforlife]

No problem. I hope you love the bench!

[@youneverknow1536]

Well, I went ahead and built a smaller ( 6' × 22") version of this bench. It's solid as a rock, simple build and didn't have a clue to as what I was doing! . Happy all around and thank you for time!

[@firewoodforlife]

That's awesome!

[@djbryson]

I assume only 4 legs then?

[@youneverknow1536]

@@djbryson nope six, didn't want to waste the 4×4's ..came out great!

[@djbryson]

@@youneverknow1536 Ha, must be sturdy. I'm going 4 legs. My bench will only be about 64" long though.

[@TroyK-ze3cs]

Great video! I built this yesterday! Thank you!!

[@firewoodforlife]

Glad you like it!