FIRST DRIVE In the BIG TURBO LS6 Volvo Sleeper!

Today after months of hard work, lots of money, and lots of stress, the Volvo wagon is finally driving with its Turbo LS6 swap! This is the first drive.
HUGE Thanks to eBay ► www.ebay.com/
Merch ► iuminventory.com/
Patreon ► / gingium
OTHER VIDS!!
Drift Truck ► • Building THE ULTIMATE ...
Adventure Bus ► • College Dropout Conver...
Rally Miata ► • Building a Supercharge...
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
AWESOME Welders & Supplies ► www.usaweld.co...

[@bkrusz]

Gingium: I think the master cylinder is bad Me: *Sees master cylinder caked in rust* Huh, you don't say

[@Avetho]

_It'll buff out_

[@Tbd_racing]

Ehhhhh just chuck er in the sand blaster she'll be fine

[@coolfrost6]

It was the master cylinder of the Titanic. And judging from it's breaking distance it wasn't good befor it sank ;)

[@_Gingium_]

It took me an embarrassing amount of time to figure it out 😂

[@LizzyB123]

In the midwest that's practically factory fresh

[@Midnight_Oil_MFG.]

I just can't wait for a pull with a quiet exhaust and an open wastegate. It'll be glorious.

[@jjj3j3jj3]

@Corbin Cox Patreon get early access

[@ThatSlowRedFG1]

Volvo pull out game strong😆

[@Mopar_logic]

Imagine someone's face when they get smoked by ancient volvo 😂😂😂

[@_Gingium_]

I too, am very excited about that

[@Midnight_Oil_MFG.]

@@_Gingium_ It's hard not to, it's the perfect set up for this build.

[@Voxx0086]

Old gingium: look at my wrench mic New gingium: haha hammer mic go bonk

[@Will.on.2wheels]

I’ve literally never clicked so fast

[@itsatrap4850]

wtf that profile pic is mine... i even thought that i comented xD

[@patrickdougherty1156]

Facts

[@onlyifusayplz5407]

I've watched this entire build with my gf over Discord and everytime I tell her "hey volvo boy uploaded a new video, you wanna watch?" she gets suuuuper excited.

[@littledrmoab7840]

Goals

[@FUKK.Tim777]

Lucky

[@_Gingium_]

Wow, that's freaking awesome! 😁

[@Pheatan]

@@_Gingium_ from a miata man to a Volvo boy.

[@tbtedi8426]

Hopefully with this winter storm hitting Illinois you'll take the opportunity to get some clips of the STi Miata snow drifting.

[@andrewapel5401]

Buuuump

[@bbbugeye2744]

💯🙏

[@itsstocky1955]

Can't wait to see this thing ripping up the quarter

[@ViDiaz]

I dont know if I have enjoyed more the smiles on his face or that awesome sound of that awesome engine in that awesome car

[@arpaton5667]

As a swedish person im glad you did this to an old Volvo.

[@reneXDgta]

That laugh with the hammer gave me hope for this month

[@_Gingium_]

Get excited, its gonna be a banger!

[@Avetho]

@@_Gingium_ Aye!

[@FDB77]

Yay you’re hiding again!

[@_Gingium_]

😁

[@HoweDoYouDo1999]

Oh fuck, where is he this time. 😂😂

[@eyesac7486]

get a “T” fitting for an air compressor, air at a 90° angle creates perfect vacuum

[@noahgullion2]

That, or just get a mityvac vacuum bleeder. Not the hand pump, but the one you hook up to a compressor. I use one at work, and they’re pretty nice

[@eyesac7486]

@@noahgullion2 ging loves the diy

[@noahgullion2]

@@eyesac7486 well I can’t say you’re wrong about that lol

[@patrickdougherty1156]

So proud of this channel have been watching every single video for the last 4 years

[@_Gingium_]

Thank you so much!

[@thatdeathstepguy8719]

I stopped watching you at the finishing of the schoolbus, but damn, I see you wasnt getting bored for a moment.. GG man! You stepped your game up pretty hard

[@adidragan]

for extra sleeper points, you need to get a really massive muffler to make it sound stock, but with a valve right before that so you can switch it to open headers when some hot-boi in a camo wrapped stanced wrx tries challenges you at a stop light.

[@fryreartechnology7611]

It is amazing to see the progress you have make over over the years. To think at one time you got glued wire connections how you make awesome custom hand made brake lines and even trying to build custom tools that 'work' ... 'ish. Who know you might have a custom shop building stuff like this for a living and over people with Pasha, John and all you friends pumping out car after car

[@devinbigpp7181]

Idk about you guys but i really appreciate how much time Caleb spends in the shop to make these vids happen

[@assassinbassin3072]

I remember when you were still posting vids spray painting the plastic bits of Molly’s interior and stick on spoilers in your parents garage, too this. What an awesome glow up man congrats on the success 🤘🏻

[@honestguy7764]

Thats a neat and tidy engine bay! Congrats

[@simpleKyle]

9:20 The problem is that you need to have the line coming from the bleeder down in the fluid. That way when air gets sucked out it becomes vapor locked and can't back flow into the brake system. As it is, you're sucking stuff out and air rushes back in to fill the void because it is less viscous than brake fluid.

[@spicyroo4429]

It's crazy how fast it's coming together! Always impressed man

[@GoofyG2.0]

0:22 i guess you could call him.... MC hammer ba dum tiss

[@pietroghedini98]

Kinda menacing that intro smile with the hammer 🎭 - - - - P.s. Volvo goes bran bran bran bran

[@pietroghedini98]

@Corbin Cox patreons are always a video in advance, I'm watching the dyno video right now

[@pietroghedini98]

@Corbin Cox usually it's just a few days but lately he's been putting out videos a bit slower so it's been a week, he said he's gonna pick up the pace again this week tho

[@DNLV-yn2cw]

The best build I’m currently following on KZbin! I love it and can’t wait to see and hear it rip! 😍🤘

[@cyre2]

dont forget the mufflers so it sounds stock and the valves for when youre ripping

[@_Bram]

You build the car I had in mind twenty years ago. Awesome, now I want one myself (again.)

[@chrismunson7899]

You already have the most unique cars on KZbin can wait to see what the future holds

[@emo420rekt]

congrats on the sick build man, i love it and i can see you love it aswell // just a tip - you should make it quieter, don't get me wrong i love how it sounds absolutely beastly, but it would add to the 'sleeper' thing

[@misaelhernandez8119]

I’m glad you brought back the hiding intros

[@Avetho]

I was thinking he was either in the B2200's bed or behind the Volvo, my first choice was wrong though XD

[@roadwarrior8213]

Yay, I ran out of recommended videos already lol, thanks for posting!!!!

[@Fadedmane1]

Oh my recommend on yt is complicated don't ask y

[@JamieBainbridge]

Who's ever been at a carpark meet with a guy who sounds like he drives a cammed V8 but actually it's a misfiring six cylinder 🤔

[@SirDavothe2]

It would look amazing low with some mean wheels. Maybe when you are over the sleeper thing you can jazz it up. Would be good for the thumbnails.

[@NFMynster]

I love everything about this! Please detail/clean her a bit inside, just to finish it all off!

[@trololol1774]

awesome build man I really enjoy watching your vids!!

[@michaelhenson5274]

it has potential to look really nice on the outside too

[@JimmyLillsund]

Please get a set of 15" Volvo steelis with matching hubcaps for the front, will look way better 😊

[@Nst25Todd]

Can’t wait for some late night street pulls!

[@derekhebert5403]

9:20 "that might've actually worked" "i..i dont think it actually worked" 😂😂😂

[@racx5285]

yesss finally a worthy video to watch 😍❤️

[@icdpride]

Bleeding Volvo calipers are a real pain especially the rears. A power bleeder is the way to go

[@yungkidnf]

Oh man, that OG master cylinder was MINT, why'd you change it? (Sarcasm)

[@D3v1linu]

Next series after fix all rust and repaint Volvo that would be sic !

[@chasefalgout9467]

Have you considered adding a pressure transducer for fuel pressure to replace that physical gauge? Having fuel pressure incorporated into the harness/ computer (and therefore data logs) would be helpful for future tuning and/ or troubleshooting 👍

[@jesussrizla709]

Welldone . Fantastic smile on your face lol

[@christianthresher195]

soooooo funny to hear that thing sounding like that and looking like that

[@illnest8616]

All of your videos are pretty amazing and fun to watch, I like your content a lot. Greetings from Greece

[@aserta]

14:30 if it sounds like a boat and looks like a boat...where's your maritime captain license, mister?

[@oehsrocks]

You should but 15s on the front so the wheel size matches. You can tell the rear wheels are bigger than the front.

[@mikestinyshedofdreams]

That is freaking beautiful! nice work!

[@jcsanti222]

Upgrade the front suspension and make a quiet exhaust with a cut out and it'll be perfect

[@Zoltec-q1g]

Gingium is MC _HAMMER_ now Badumm tssss

[@jompazx1272]

you should consider bigger breakes. and change all the bushings in the front.(id go for new stock ones but poly is and option.)

[@mandymcgill9503]

Hi well done ur really happy it shows all the hard work paid off ...I going to do the same to 944 thanks for showing us nice and thanks enjoy

[@KB325i]

I have waited all day for this I got the notification just before my first class started, damit gingium

[@trevonedwards8412]

Imagine this against lz’s barra mustang when they’re both making over 1000hp to the tire in the semi close(ish) future?

[@mohmoudfarah1897]

Great job!

[@masked3207]

Flooring it will be poggers Edit: I wanted to watch this at work but couldn’t so I’m late

[@ardenunger2932]

8:24 Rare footage of Engineerium at work

[@lucassanches3568]

*_massive brainium_*

[@XeL_666]

Sounds great! Excited to see this car make some people regret messing with it!

[@MrEbrahim019]

I just realized how many times you say "umm" and "ahh" in your videos

[@chains7844]

This is singlehandedly the greatedt volvo there is

[@finlay230]

awsome work asusual !!!!

[@hogdog567]

Love the concept. This needs a fake peashooter exhaust.

[@_Gingium_]

;)

[@RadioactiveSaddam]

Yea. I have seen fake stock exhausts on 240 and 740 before. Nice ad to the sleeper look. 👍

[@billhunter1388]

I don't understand why have gotten so little views in the last couple of months. Your channels awesome

[@_Gingium_]

I dont either :( thank you though!

[@Space_Naught]

Trying to remember if I already saw this through patreon. Oh wait I remember him forgetting to plug the injector in. Yup I've watched it. But I'm already here.

[@Merlin-pz2ju]

Next Intro Idea : Lower yourself from the carstand (dont know the word) into the pov of the Camera as you speak. Great Content as always

[@jamesallenmainieri]

We just call them lifts here

[@andheeid]

seeing your giggle on the first drive, i feel you....

[@rauldeu56]

Let’s go!!!!!

[@apsert]

Have you ever heard of a Bleeder pipe that has a liquid gas valve at the end that allows liquid out but wont allow air back in? Cost about £3-4.00

[@oxcartracing]

your brake bleeder the inlet from the bleeder valve needs to be submerged in the brake fluid and the other one needs to be in the air that would make it vacuum because with the long tube in the fluid when you stop the vacuum it doesn't recirculate the air back into the system cuz it's pressurized

[@awabmohamed5079]

Gingiem: i know a device that i can make Me: cant eaven put a tv remote together alsow me woooooow

[@jompazx1272]

the volvo breakes are kinda special. one line per pair of pistons and each bear is connected to one rear wheel. this is so that if ONE breakline no matter which break you always have some braking of 3 out of 4 wheels. in most cars and never volvos (they left this system when they introduced float single piston calipers) there is one curcit in the back and one in the front, and therefore if one line breaks you have breaking you lose breaking on one axle.

[@andrechristiansen2161]

the volvo needs an exhaust with a silent/loud choice flap on it for maximum sleeper points

[@TVSbro]

I think we're missing an opportunity if we don't call this the "Soccer Bomb" like soccer mom, but bomb...

[@BlueScreenGaming1]

Let's make a 600hp volvo! Should we upgrade the brakes designed for 141hp? Nah they will do fine

[@lostoxicos24-78]

Love it bro

[@reliicx]

14:05 was that curious George? 😂☠️

[@brianhoose2601]

If you didn’t put friction modifier in the rear end when you changed the fluid you need to.

[@tsimm]

Suggestion... you should covers those relays attached to the tank for your heater exchanger. One leak there with watered down or old cooliant and you could film the car catching on fire

[@MikevanEsch]

Yay finally

[@Hauuy-el1vv]

Gingium is my favourite diy and budget car channel

[@gedas3419]

Is your intercooler water seperate from radiator?

[@davidwrobel284]

Congrats :)

[@herlemaggard69]

Finally realized who im reminded of, friggin Krillin

[@daledolan-zalaznick844]

I’ve been watching since your Forza days and I can’t believe how far you’ve come Great work man

[@jax6580]

Never been so hyped for a video

[@BigBenlolz]

Pasha done goofed some edits lol

[@Torch4ya]

Bro, run a hose from the nipple into half a jar of brake fluid. Pump away and watch the bubbles flow. Close bleeder. Repeat 3x. Brakes bled. Voila.

[@maclainsxl]

Let’s see more on the ls400

[@mikaelmakinen995]

"Posted 21 seconds ago"

[@NotSean269]

I'm still always Blow away that everyone bleeds brakes from the master cylinder to the Callipers, At rallies and track we push the fluid through with a giant Syringe. push till you see the level rise in the Res and close the nut, no chance for air to get in and WAY WAY faster without the faf of Up!.. up.. Down.. Down.

[@Bri-tg6xr]

This car is the definition of a sleeper, I just taught my six year old what a sleeper was using your car as an example, he is still so confused!

[@fryreartechnology7611]

You need cutouts and a super quiet exhaust so you don't hear that V8 then open it so people in the start over can hear it

[@kristsdonins9471]

Cant wait to see this boat in some performance 😁 btw sub since subaru wagon build 😁

[@DingDongDrift]

let me know if you wanna design and 3D print a dash for that Holley screen.

[@eel1331]

Wow here before 600 views, CAN I GET A HOOOOOOOYEAAAAH

[@grantsvlogs]

Love how he did attempt to hide lol.

[@elijahcavin2408]

Should've put a muffler on it, would've made it more sleeper

[@zippyoya]

When you get a fan for the car keep in mind these 2 things 1. make sure the fan is gonna cover at least 70% of the rad 2. the fan for a small block v8 like that should need about 2100-2300 cfm of airflow i have a 351w and a fan that does 2100cfm and it works fine

[@Dedis87]

awesome