FIRST ENGINE MOD! ON MY 2021 MACH 1 That Every Ford Mustang Needs To Have!

[@OtisSpringerpilot]

Thanks for posting the Catch-Can video, Zander. Owners are still looking at and using these videos to make decisions. I bought a 2023 Mach1 in Jun '23 and went real easy on the engine (

[@CoyoteAUS]

Need the can for sure. As mentioned before. Headers and cat back, billet OPG and CS, 3 L Whipple with 700-750 wheel horsepower plus bmr rear and coil overs and your done for a very safe and fast/fun car.

[@FastLifeVlog]

how about crank timing hub/pulley? Same problem with BMW S55 engine but in Mustang seems to be a problem with to soft metal not design like in BMW.

[@bustinyanutz4195]

I wouldn't go to wild on the engine mods, maybe a pro charger with about 650-700WHP, keep it reliable, fun, not a headache money pit

[@Zander13Productions]

That’s my plan

[@19gt92]

100%

[@AtticAZ]

I second this. 🐌💨💨💨💨

[@11B_GRUNT]

Bustin yanutz, thats what I said, Is love to see him add a procharger on there. You don't see too much content with prochargers on KZbin and thats what Im running. It makes great power and its fun and reliable

[@AtticAZ]

@@11B_GRUNT Yup. More manageable power vs. “break shit” torque. Lol 😂 and the power keeps on coming on.

[@TheWolfMatt]

Catch Cans are some of the best 1st mods for any car. Even if you don't race your car and just drive around in your daily, its still a great mod to do as it will save you a ton in the back end. Real life savers for your engine from ingesting debris it doesn't need to. Great pick btw Zander, I've used them before, very easy, plug and play in most cases.

[@Zander13Productions]

💪💪💪

[@CanadianCruisin]

Nice. My 2019 still fills up about a quarter of the way between oil changes. Definitely a must have

[@Zander13Productions]

💯

[@bitedawg]

my first "engine mod" also,i'm on my 2nd s550(17-6r80,21-10r80 gt's)i was a bit dissapointed that my ford performance "air/oil separator" for the 17 didn't actually fit the 21,so i ordered the correct one and the fitment is perfect,i pull it container quarterly,and i usually have 15-22 cc's of oil in the cannister...love your content and following your build!

[@shermantpotter7263]

Ooh ooh...get the hood gas struts!!!

[@kevinsarkisian3668]

Will be my first "mod" before I even leave the dealer..purchased a JLT already just waiting for my '22 to arrive...next: cold 🥶 air filter, resonator delete w/x-pipe, hood lift struts, window tint,...it never ends!!!

[@Zander13Productions]

🙏🙏🔥🔥

[@jloilseparatorco.1853]

Love the Mach 1 Alex, we appreciate you choosing us to protect this one too :)

[@Zander13Productions]

🙏🙏🙏🙏

[@bbgroundworks]

Good job as always. Side note -I love the fact you start with a Bible Verse, it's always good to be humble and express your beliefs.

[@Zander13Productions]

🙏🙏🙏 just doing my part

[@greg196369]

I just got 1 of these. Thanks for the free tutorial. I'll install it this weekend!

[@theloosenut1701]

Just ordered this catch can with your discount code, Thank you for your videos!

[@19gt92]

I truly see u going in a great direction with the new Mach 1, looking forward to upcoming content

[@Zander13Productions]

💪💪💪

[@tomsilon]

I have same car. I installed the catch cans on both valve covers.

[@TheLoneWolf_andCoyote]

It needs texas speed long tubes and a X-pipe like on you're old blue GT. I'm interested in the wheels if you decide to put new rollers on.

[@davidreichl16]

Lovin the Mach 1 content. Keep 'em comin.

[@joshuajuno6073]

+100. It’s the first “engine mod” I do on my stangs and camaros

[@afitzgoon24]

Check out those ESS centrifugal supercharger kits man. I see a lot of happy campers with that setup.

[@Zander13Productions]

I have been 😉

[@xxbonrockxx]

Great first mod the Mach 1 Bro! 👍👍

[@Zander13Productions]

🙏🙏

[@MadMax-qb4lk]

Nice man! Keep the videos coming!

[@ocasio3024]

Nice car bro ! My first Mach 1 mod was kooks LT’s with steeda Xpipe res delete. Kept the factory axle back. Those cans are pretty cool tho. Think I’ll order a set! ❤

[@joshodin19]

Definitely the best 1st mod!

[@drkhorse1816]

My first mods were also the jlt oil catch can and I also got steeda jacking rails!

[@dougcoleburn1579]

I did both sides on my Bullitt. A good mod.

[@foxrydes6249]

I have the JLT catch cans on my 2016 GT350, I have never had a drop of oil in the driver side can, just an FYI.

[@Zander13Productions]

Yea. Only passenger side is needed

[@JoseJimenez-vk8kv]

I agree, Installed in mine a while ago.

[@lobbyrobby]

If your boosting this car you should check out the ess supercharger kit. I recently purchased the g2 kit with the g3 intercooler. My plan is to get around 600 whp. That's plenty of power for me and it'll be a fun street car

[@Zander13Productions]

☺️

[@Zander13Productions]

Something is coming. Can’t say what yet

[@MrBilly235]

Thanks for the $8.45 off my J&L Oil Separator order!

[@danielgilada2943]

Were you able to keep you catch can after putting on the ESS Supercharger? Also, why did you end up getting rid of the Variant wheels?

[@erniedefillo3709]

Great idea love the car unfortunately I can't find anyone to ship it to California. Can't wait to see what's in store for the Mach 1

[@Zander13Productions]

Yea they are definitely worth getting if you can find one

[@NITROUSnBIASPLYS]

Make sure when mounting your catch can it can't rattle against the motor. This can cause false knock

[@heavenhelpus479]

The UPR catch can is by far the better product for this car. Instead of "hanging" off the engine, its bolted to the body up near the radiator. The lines are way thicker and the overall appearance could pass as a factory install.

[@MrMach1]

Excited to see what the end mods are.

[@grayghost1423]

I got mine on Sunday. I ordered the spoiler yesterday. Did you install yours?

[@braidenrahn2534]

so it shows passenger side and driver side. does a guy need both sides or just 1 side and which side also thanks for your video my stealership was gonna charger me hour labour at $150 per hour to install this

[@Phoneman-oc4fi]

That damn Clarksville weather

[@11B_GRUNT]

Hey battle, I have a wrenching question lol I have a 2019 procharged Gt, I recently took the cats off and I got a check engine light. I took it to my buddy garage to have it read and it showed it was running rich. We cleared the code and its running fine, but couple days ago I opened it up a little and ran it up to 130 mph and the check engine light came back on, the car still runs great. Do you think this is something I should be worried about? Thanks man lol hope you go procharged 🏋️‍♂️🏋️‍♂️🏋️‍♂️

[@sliknik1025]

Removing the cats from any car will always trigger the check engine light (CEL), sooner or later, if it has the sensors after the cats. That won’t cause any harm to the car (you’ll be smelling the toxic fumes though), but if there’s an issue with the car that will trigger the CEL, you won’t know about it since your light is already on. The best way to take care of this is to get a tune that won’t trigger the CEL because of no cats, but that might void the warranty.

[@Zander13Productions]

Definitely data log it for the tuner and make sure they adjust for cat removal

[@chipanderson4768]

Did you keep this in the same location with your Supercharger?

[@THEDriverMod_]

Next mod: Forgeline Wheels!!! Especially for the road coursing....best wheel out there.... period.

[@ssalamri7302]

I like guys how take care of the cars first than add mods 👍 if i well you the next thing well i do is the crappy plastic engine oil drin plug

[@scottsigmon926]

I can see this car with the new procharger and LTH, resonator delete and hi-flow cats, with injectors and fuel system. Not so much a drag car but a very fast, dependable roll race car that you can take to road courses and actually have fun!!!

[@Zander13Productions]

Big things coming very soon 😉

[@blainehouser4354]

Great Video!

[@Zander13Productions]

Thanks

[@AtticAZ]

Let me know if you see any false knock from this. Usually JLT non-mounted cans cause it, due to sometimes rattling on the intake manifold. Mine did. I got rid of it.

[@Zander13Productions]

I never have in the past. I just make sure there is lots of clearance

[@GarveyMustangMan]

Seems easier to do on the Mach 1/Bullitt because you don't have to remove the engine cover and strut tower brace?

[@Zander13Productions]

☺️

[@hellraiserx9490]

When I drove one of the first mach 1 to my dealership I thought to handling was on point it was like driving on rails I don’t know how much more you can do to it to make it handle even better. “I don’t drive like a race car driver so that may be why lol

[@kgthegreatone943]

I put one on my frs last year

[@ttown918]

Seems odd to me - if they are so valuable and cost very little, why doesn't Ford include them as part of the Mustangs they sell.

[@P3Gauges]

1 Peter 5:7, AMEN BROTHER! Great video👍🏼👍🏼

[@Zander13Productions]

🙏🙏

[@jimpaine7455]

With the fact new coyote has duel fuel injection, is this really necessary.

[@Zander13Productions]

Yes. They work

[@Topofthelinetommy]

You should do a shaker hood

[@jameshows5419]

That was the first thing I did to my RS3 .

[@jasondavidson2411]

Love the scripture! Thank you

[@Zander13Productions]

🙏

[@carthelskinner2384]

Keep her dry. I'm loving this car bro. Loving the content. The game to was awesome but I love mustang and you got a gem

[@Zander13Productions]

🙏🙏🙏

[@tomeasley1502]

I see you didn't put one on the driver side and was wondering why.

[@Zander13Productions]

It’s not needed

[@jmendozas197]

Would look good with some window tint.

[@Zander13Productions]

Video soon

[@ancientruinsofficial]

Cant wait to see the new wheels😮

[@Zander13Productions]

Two videos away 😉

[@ancientruinsofficial]

@@Zander13Productions 😶‍🌫️🤠🤠🤠

[@radfish4161]

That doesn't count as an "engine mod"! :D Looking forward to more! Love the channel.

[@Zander13Productions]

🙃

[@Blakey12F]

Could I put one on my 2.0 engine

[@jessebudelman]

Plan on doing any autocross? I wish ford made one for the 2.0 ecoboost. I gotta blast my valves because I’m a dumb dumb and didn’t put one on right away when I bought my ST.

[@Zander13Productions]

Yes. This car will be built more to handle than drag race

[@jessebudelman]

Hell yeah! Enjoy the car man! Looking forward to more content

[@BOSS-jf7on]

Thanks for sharing!!

[@Zander13Productions]

💪💪

[@cj-gy4yl]

Please keep this beautiful car as stock as possible.. ie don't change the wheels!!

[@evancontos2267]

I’m still waiting for my MACH1 and new to Stangs. I’m confused I thought I saw some other videos where guys were putting two catch cans on Stangs? I was wondering if it was because of the double overhead cams? Would appreciate if someone could educate an X Mopar and Chevy guy 😜

[@Zander13Productions]

There are two yes but only the passenger side is really needed

[@evancontos2267]

@@Zander13Productions Thx for the reply, Huh, how come?

[@kennethburton3056]

I love it bro.

[@Zander13Productions]

🙏🙏🙏

[@Zander13Productions]

Hope as is well brother

[@kennethburton3056]

@@Zander13Productions man I miss talking cars with you bro

[@arthurflot9230]

Yessss🙌🏽 🔥 🔥

[@futbolnation6360]

Well u see with these 3rd gen coyotes, that everyone seems to forget abt or that they just don’t know abt is that ford already figured this problem out , see this motor has 8 regular fuel injectors that spray gas into the intake manifold and which cleans the intake valves of carbon build and then deep inside the engine it has 8 more GDI injectors that spray on the Piston for the most power and of corse this is all computer controlled for the most power and wot pulls GDI injectors spray when cruising, the regular fuel injectors spray through the manifold to clean the injector valves so technically not 100% needed mod for a catch can on these motors but still won’t hurt doing it just kinda of waste of money but then again not really

[@Jack-b5o6r]

Let’s go!!!!!!

[@AStanton1966]

Do standard Mustang GT wheels fit on the Mach I, or do they require special rims to fit the caliphers?

[@volkswagenhawk7094]

Same brakes as any PP1 car

[@grayghost1423]

I pulled the catch can off my 22 GT I traded for a 23 Mach1 this week. About 1k miles and it was about 1/8 full. Can I ask why you traded your Mach1 for the Supra? Do you regret getting rid of the Mach1? Like the Scripture Brother. Your new GT looks great, the white with accents is outstanding. Are you gonna black out the emblems?

[@Zander13Productions]

I traded the Mach 1 for a truck. Then the Ranger for a Supra. I made a whole video on why.

[@grayghost1423]

@Zander13 I am a subscriber, I looked before I asked, didn't see it, thanks.

[@AndrewBaker302]

So... Does J&L still do cold air intakes?

[@Zander13Productions]

That still falls under the original JLT brand I believe

[@jrrogersstang4696]

Works great

[@bustinyanutz4195]

I remember you saying the 2021-2022 mach 1 was a parts bin car, you was with stangmod when he was giving away the gray,black with orange mach1, did you change your mind? Or do you still feel that way? And why did you choose the mach1?

[@Zander13Productions]

Video coming on that

[@SaviorZeroNiner]

Oil Separator huh? I smell boost in the future 😏

[@Zander13Productions]

😊

[@machdaddy6451]

Is there a supercharger in your future?

[@Zander13Productions]

Yes. I already have it here too

[@machdaddy6451]

@@Zander13Productions When will we learn the brand?

[@jasonross5524]

Love the Scripture to start the video! my son has a mustang channel (snakebitten97) and I think it's a great witness when you guys talk about the Lord!! Keep it up

[@Zander13Productions]

🙏🙏🙏 just doing my part as commanded

[@jasonross5524]

@@Zander13Productions glad to hear brother! Lord bless you and your channel!

[@eugeneeckhartiii]

That car 🔥

[@Zander13Productions]

🙏🙏

[@Mike_OMara]

Beautiful car. I have a 21 Gt mt82 tuned by Lund, car moves out! Please don’t waste the money on OPG’s, you don’t need them. Unless you plan on banging the rev limiter all day lol.

[@55cleon]

The Car Is Going To Be Boosted...HE DEFINITELY NEEDS OPG's!

[@kiranherman5668]

Gloss black the roof please!

[@machdaddy6451]

One guy I was watching suggested one for each side?

[@john-wk4gq]

can this beat a Tesla X Plaid

[@Zander13Productions]

No

[@travistoussaint21]

I’ve heard this is no longer true. The new coyote comes with direct and port injection which means it essentially cleans itself.

[@Zander13Productions]

They don’t. I have them on all my gen 3 mustangs and they collect oil. Have one on my 2021 f150 too and it fills up every oil change

[@jimpaine7455]

I have read the same thing. Is it recommended o a gen

[@DucatiDiaries]

👍👍

[@BigDelapJr]

why wouldn't ford just have these installed standard

[@daleknapp7127]

I agree on the catch can…… added mine to my GT when it had under 100 miles also…… can’t wait to see what mods you have in store.

[@Zander13Productions]

🙏🙏🙏

[@Smokeshow767]

That was the first thing I did also to my Mach1. I got the JLT about 2 months ago so it must have just changed names. I checked mine at 1,300 mi and it was about 1/8 full. Definitely worth the money.

[@Zander13Productions]

💪💪☺️

[@SynergyCamaro]

I’ve never understood the KZbin thing of getting a catch can for a car you’re gonna keep for 6 months.

[@Zander13Productions]

Lol keeping this longer than 6 months

[@ignatiusdavis7125]

Love the bible verse. God bless brother.

[@Zander13Productions]

🙏🙏🙏 you too

[@davescott9409]

I hope your valve stems and guides don't wear to much from this. It'll probably be OK, if your not going to rack up miles on the car.

[@YingYangStang]

Hey - I have the same car and looked up the model number of that JL oil separator and couldn't find one for our cars can you please list it here thanks ... Total waste of money - just BS

[@Zander13Productions]

It’s the same one for the gen 3 coyote. Promo code ZANDER13 www.jlosc.com/jl-oil-separator-3-0-passenger-side-2018-2021-mustang-gt-2019-bullitt/

[@stevmstng5165]

👍

[@minibikemadman]

Bags wide body and no hood.

[@Andreallen4]

You should probably leave the car alone, would help to not always break your engine since you think that gets views. All you need for road Racing is good tires, safety equipment and seat time. Learn the car before looking for more power or suspension mods.

[@jaspajones7045]

Gas will be 5 bucks soon.

[@Zander13Productions]

I filled up yesterday and 93 was $4.80. I about had a stroke lol.

[@joshuaparrish9635]

Aww man, you cheated. Was hoping you would do this by the instructions by unhooking that wire harness so I can see how it is done. I have the same car with the same catch can, but I have been paranoid about installing due to that step. I don't want to damage those wires or connector.

[@Zander13Productions]

I didn’t have to disconnect anything. That one side literally just went under the wire

[@joshuaparrish9635]

Looked like you went in between the wires on that harness versus under the entire harness.

[@Zander13Productions]

@@joshuaparrish9635 yes exactly 😉

[@QuillyOG]

this dude does the same videos back to back to back. here we are back to “catch can” dependent videos. this style video is so 2019-2020. trying to make it so damn bad on youtube. can’t do it with overly recycled content bubs

[@poopscooper5038]

Car is gonna be sweet!

[@chillis28]

👍👍