First flight ! NEW 1.6m Avios Super Tucano w/Retracts, Flaps & LED Lights

  Рет қаралды 9,945

Essential RC

Essential RC

Күн бұрын

Пікірлер: 66
@EssentialRC
@EssentialRC 7 ай бұрын
AVAILABLE HERE: fas.st/t/Z32DTZWQ
@heroldriley9017
@heroldriley9017 6 ай бұрын
One of the nicest landings I've seen in a long time. Another good Avios product.
@AntoniusBlack01
@AntoniusBlack01 7 ай бұрын
This video made me so happy I hit the prepurchase button!
@MWall711
@MWall711 7 ай бұрын
Always enjoy your videos and admire your ability to fly so smoothly in the wind. That wind sock is always dancing!
@jollyroger2226
@jollyroger2226 7 ай бұрын
Very nice demo flight. It's a winner!
@IceMan2035
@IceMan2035 7 ай бұрын
Handles the wind well. Nice sounding bird and nice size. The only complaint is no gear doors but for the money thats a good buy. Great video Dom
@DadsRCHangar
@DadsRCHangar 7 ай бұрын
What a maiden Dom, she looked very stable, that sound was pretty Orsum. Butter landing with all that wind about as well. Great flight 👍🏻
@EssentialRC
@EssentialRC 7 ай бұрын
Thanks 👍
@pietroseven8228
@pietroseven8228 7 ай бұрын
hmm, this was the demonstration! Landing against the wind, beauty!
@EssentialRC
@EssentialRC 7 ай бұрын
My 2nd flight was a lot better than this. Check it out here kzbin.info/www/bejne/h5_MpY13Zc6EnLs
@jessdyba
@jessdyba 7 ай бұрын
Mine's on order!
@rc-fannl7364
@rc-fannl7364 7 ай бұрын
Great demo, greased that landing
@simonbrierly5530
@simonbrierly5530 4 ай бұрын
Just got mine, I notice the Quick start guide has different flap settings to the PDF manual. 55 and 25 Deg as opposed to 25 and 45 mm. Just wondering what you are using.
@EssentialRC
@EssentialRC 4 ай бұрын
Maximum for landing and half that for take off. I just keep it simple
@ArthurRC
@ArthurRC 7 ай бұрын
Insane plane and perfect piloting 🎉 Well done Dom 😊
@EssentialRC
@EssentialRC 7 ай бұрын
🤙
@kostasganosis8019
@kostasganosis8019 7 ай бұрын
What can I say about this fantastic airplane and the very addicted sound... I saw this video 5 times in a row
@EssentialRC
@EssentialRC 7 ай бұрын
Next vid even better!
@armandjose4777
@armandjose4777 7 ай бұрын
Nice, really can handle the high winds! PAF MABUHAY!
@custardthepipecat6584
@custardthepipecat6584 7 ай бұрын
Wow it’s big 😺
@glm777
@glm777 Ай бұрын
Great vid! and great flying. Zoom out a bit!
@JakeBullit123
@JakeBullit123 7 ай бұрын
Needs the RAF scheme like we see in The Loop. Flies nicely though, great landing.
@stuartwarnerc
@stuartwarnerc 7 ай бұрын
If the RAF ever flew super Tucanos, it would have been my first choice believe me 😉
@JakeBullit123
@JakeBullit123 7 ай бұрын
@@stuartwarnerc Ah ,thanks.I`m getting my Tucanos mixed up.Keep up the great work.
@FlankerTanker
@FlankerTanker 7 ай бұрын
Mine is already on Back order - do you have any information as to when it will be available here in the UK ? it sounds Awesome !!
@EssentialRC
@EssentialRC 7 ай бұрын
Late July according to the product page I think.
@CapnTomassoEduardo
@CapnTomassoEduardo 7 ай бұрын
Great looking plane. The ModelAv8r channel showed both the fuselage and the wings needing to be epoxied together. I think you said the major parts were all bolted together. Wonder what the difference is.
@EssentialRC
@EssentialRC 7 ай бұрын
I glued the 2 plastic inserts (wing attachment straps) into the wings but didn't glue the actual wing halves together. Achieves the same thing. I didn't have a manual when I assembled mine.
@M4rkmcc21
@M4rkmcc21 7 ай бұрын
I HK this and they recommend glueing the wings together for piece of mind. I'd say don't glue them, fly it, if you love it then glue them together. I'd imagine glueing them tougher makes it a hard plane to sell on due to its permanent wingspan and posting etc
@CapnTomassoEduardo
@CapnTomassoEduardo 7 ай бұрын
@@EssentialRC Thanks. The other video showed the fuselage was in two pieces and had to be epoxied together. Maybe they had a pre-production one, or something else.
@stuartwarnerc
@stuartwarnerc 7 ай бұрын
@@CapnTomassoEduardo fuselage is two part, needs glueing, use contact foam glue.
@M4rkmcc21
@M4rkmcc21 7 ай бұрын
Dom what are them crease lines above the wings on both side of the Fuselage? Is it wear marks from heavy landings or mold lines? I can't tell. Thanks.
@EssentialRC
@EssentialRC 7 ай бұрын
Scale detail moulded into the fuselage on both sides.
@AeroNautical100
@AeroNautical100 7 ай бұрын
Were the wings quick connect on this? Or did you have the run the wires ?
@EssentialRC
@EssentialRC 7 ай бұрын
One connector block from each wing half needs to be pulled into the fuselage and pushes into a connector in the fuselage. The wing is secured to the fuselage with 4 bolts.
@stephenrout9025
@stephenrout9025 6 ай бұрын
how many mins did you get from your li-po
@EssentialRC
@EssentialRC 6 ай бұрын
Think I flew for 5 to 6 minutes but didn't look at pack voltage after. Long enough for an intense aerobatic flight that I did in the next video.
@russcoaus2043
@russcoaus2043 7 ай бұрын
😎👍
@stephenrout9025
@stephenrout9025 2 ай бұрын
Is it a xt90 plug in plane
@EssentialRC
@EssentialRC 2 ай бұрын
Yes
@florentinocamposjr1540
@florentinocamposjr1540 7 ай бұрын
Is that a Philippine Flag atop the rudder?
@EssentialRC
@EssentialRC 7 ай бұрын
Yes
@WCKD.
@WCKD. 7 ай бұрын
I enjoy building RC foam and plastic model kits. Modern PNP or BNF models are too easy to put together. There is no challenge.. Nowdays kit versions are pretty much non exist. I wish some company would bring back kits like GWS used to make or something like that. 🤔
@certy_huh
@certy_huh 7 ай бұрын
Minimum rc makes fun foam/wood kits
@theoztreecrasher2647
@theoztreecrasher2647 7 ай бұрын
@@certy_huh Apart from that, just get your Grandpappy's plane, adze and spokeshave out and craft your own from scratch! I can't stand these lazy folks who want to use "Kits!" No pride in craftsmanship these days! 😱🙄😈
@richardmeekums6321
@richardmeekums6321 7 ай бұрын
Get a balsa kit and build a proper plane
@certy_huh
@certy_huh 7 ай бұрын
@theoztreecrasher2647 sometimes getting the lazercut kits can be easier and more right to the point than trying to get specific wood and making a airplane that may not turn out how you want it too. While I do appreciate people who make their own planes, it's just easier to get a pre cut kit.
@theoztreecrasher2647
@theoztreecrasher2647 7 ай бұрын
@@certy_huh Whoosh! Oh dear, American? 🤔😜😂
@stonkeng
@stonkeng 7 ай бұрын
Hi, I tried to pre-order today and the lipo deal has finished.
@EssentialRC
@EssentialRC 7 ай бұрын
Oh, that's unfortunate 😕
@FlankerTanker
@FlankerTanker 7 ай бұрын
I messaged Hobby King and they told me that the Lipo deal was never available in the UK - you needed to order from USA or Global and the shipping from those locations make it a NO GO -
@mach9908
@mach9908 7 ай бұрын
Make sure you select the correct deal in the drop-down box on the order page. I believe for the UK it should be GB.
@mach9908
@mach9908 7 ай бұрын
@@FlankerTanker Select GB deal in the drop-down box
@stuartwarnerc
@stuartwarnerc 7 ай бұрын
@@FlankerTanker hi, sorry but this is not correct, this offer is available in all warehouses. Please just make sure you are clicking on the deal for the WH that is closest to you.
@marianomari4130
@marianomari4130 6 ай бұрын
Spare props are back order and no date available. Doubt very much they’ll sell you a single blade…
@EssentialRC
@EssentialRC 6 ай бұрын
True. Spares show them as packs of 6.
@steviep9270
@steviep9270 2 ай бұрын
Not impressed with the quality of mine. I patiently waited for months to get one and there were so many areas of minor damage from the shipping box, I was very disappointed. The ESC was broken and the rudder connection required surgery in order for it to screw down properly. Poor quality paint, many areas of peeling/flaking. I hope it flies well…
Talking and flying the biggest F14!!
11:06
Martin Pickering
Рет қаралды 649 М.
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
Making A Twin Cylinder Engine For My R/C Airplane
34:07
JellyFish Machine
Рет қаралды 975 М.
More Than a Scale Bird - Avios Super Tucano 1.6m
11:12
Two Brothers Radio Control
Рет қаралды 21 М.
First test flight of the Pilatus PC-24 RC jet
12:58
Ramy RC
Рет қаралды 282 М.
Ultra Slow Mo Propeller Smoke Vortex - The Slow Mo Guys @tested
14:36
The Slow Mo Guys
Рет қаралды 671 М.
Building (And Crashing) my Homemade Surveillance Drone
16:55
Lafayette Systems
Рет қаралды 445 М.
How to Fly Your RC Jet from Cockpit Using Head Tracking FPV - Part 1
8:08
Motionsic RC & FPV
Рет қаралды 448 М.
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН