This is how you change the rear mount. enjoy and good luck!
Пікірлер: 53
@stanislavponomar2588 Жыл бұрын
This is the only video that doesn’t tell you to lower the subframe or hammer the studs out from the mount. Bravo! Great video.
@susanhawkins46064 сағат бұрын
I got so irritated trying to replace this mount about 4 yrs ago that I gave up. And I refused to pay $400 for someone else to do it. THANK YOU for posting a way to do this without dropping the subframe or using an engine hoist!
@Kevstipsantricks4 сағат бұрын
Of course, dude! Glad I could help!
@SouthSideChiTown2 жыл бұрын
I have a 2006 Scion Xb, and a 2002 echo. Identical engine/trans in both vehicles. I need to do all 3 mounts on my echo, and this is the one i'm dreading. This is the only video I've seen yet that suggests taking out the bracket to get the mount out from up top, instead of trying to fish it out by jacking up the engine and taking off the crossmember from underneath [like i did on my last echo}. You sir, are a genius. Videos like this are what youtube is for.
@dannysautorepairАй бұрын
This man deserves a six pack. Thank you sir
@broletsdiginasmr5366 Жыл бұрын
You are Genius. TRQ video even lower the subframe and fished out the mount from the bottom. You da man!!
@SANTHER0012 жыл бұрын
Great video!!! Thank you so much for this info. I saw a lot of videos saying that you need to loose the subframe, but you made it so easy for us!
@Movementwithjames5 ай бұрын
Great video, it helped me through the repair
@mylittlescienceproject2 жыл бұрын
Thanks man, so now I know it definitely can be done the harder way, but easier way at the same time. I guess you just gotta have some patience going from the top.
@johnthegame692 жыл бұрын
This method worked flawlessly. Thank you very much!
@Kevstipsantricks2 жыл бұрын
Glad it help you!
@khodayehrangekaman31511 ай бұрын
❤😂 Live Action as turtle man used to say 😂 thank you so much for your❤ awesome video . bless your❤ heart 👌🙏🙌👏 ✟🇺🇸
@tonyhernandez70472 жыл бұрын
Good info thanks, bout to do mine this weekend
@SWells6793 ай бұрын
☝🏼This is the way! I did it this way a couple years ago. The hardest part of the whole job is breaking loose the bracket bolts... mainly the top one. There's just not a lot of space to get your wrench and strong arm in there. You really need a good 6 point wrench and positive attitude.
@mdrmoose2 жыл бұрын
Nice video bro, about to tackle mines. I had to check youtube cause forums was saying had to drop sub frame and exhaust! Figured they were wrong lol!
@MilanoGuyTexas11 ай бұрын
The force is strong with you Kevin
@connorlearmonth6652 жыл бұрын
I guess the only downside to doing it this way is that it’ll be impossible to get a torque wrench on the smaller bracket bolts. Does seem more doable now without having to remove the subframe though. Thanks for the video
@ROCAMindset7 ай бұрын
One handed... Damn skills! Thank you Kevin Dooris!
@Kevstipsantricks7 ай бұрын
Your welcome!
@mcarr86852 жыл бұрын
Great job, thankyou for sharing.
@kumingo2 жыл бұрын
Awesome video. Thanks!
@johnbouldin90338 ай бұрын
I gave up mid-install on my Scion Xa with trying to line up the holes for the new rear mount. Removing the old mount took a few hours. Dropped in my Toyota (from Longo Toyota) ream mount and then spent a few hours trying to line up the bolts from underneath the car. Raising and lowering the transmission via a scissor Jack with a block of wood but I couldn’t get the bolts to grab. I used a prybar and had them close but after six hours…I’m done. Replacing the starter the previous weekend made me overconfident. Sigh-off to the mechanic she goes😂
@scooterjloophole2 жыл бұрын
Awesome video! Thanks!
@khodayehrangekaman31511 ай бұрын
O brother I wish you could show the whole action . 😂 live action 👍✌👏🙏👌.waiting for the part from 1Aauto # $ 43
@mylittlescienceproject2 жыл бұрын
Don't forget the little 12mm one above the rubber bushing.
@davidbrady8625 Жыл бұрын
Thank you for the video. "Live action!"... That's from the Turtle Man.
@betavirus112 жыл бұрын
Bro...... I literally thought this was going to be an impossible task that would involve me removing my k member. I'm still driving it at 289k. Slight head gasket issue that I patch every 6 months ,but she's still running. Would just like to say that thankyou and I will be doing this.
@Kevstipsantricks2 жыл бұрын
Sure thing 👍🏻
@mydaddy53932 жыл бұрын
Great video. I've had my car up for like 2 months debating how to get to this one. Did you mostly unbolt the bracket from the top? I've seen other videos showing to remove a lot of stuff including the exhaust to get to it. This looks much easier. Thanks man 👍🏼
@LujinCustom2 жыл бұрын
Thanks
@wolfemanbog41762 жыл бұрын
Wow looks easy once you know the magic tricks
@garynemens4892 Жыл бұрын
How did you put the bottom bolt in on the bracket. From the top? It's such a tight fit
@Bstonz8511 ай бұрын
Was the old one causing a rough idle in drive and sometimes a rattle?
@mydaddy53932 жыл бұрын
What wrench or tool did you use to unbolt the one that goes across the motor mount. The same wrench? It seems like it might not work since the bolt is deeper to get to. Thanks!
@Kevstipsantricks2 жыл бұрын
If you're talking about the long bolt that goes through the middle of the mount. It is 14 mm on both ends I put a box wrench on the nut side close to the exhaust and either a gearwrench or socket can't remember.. on the the bolt side.
@theoneracer271610 ай бұрын
What about the 24mmlong cross bolt getting it out and putting in you left that out?
@Kevstipsantricks10 ай бұрын
You mean the main bolt that secures the bracket, and the mount together? I didn’t think that needed explanation. You just undo it and slide it out. 🎉
@jody78652 жыл бұрын
Was the jack under the engine or transmission? Do you have to support both the engine and transmission or just one of the two?
@Kevstipsantricks2 жыл бұрын
So I used a piece of wood 2x4 maybe a foot long. On top of my jack and put it up against the oil pan of the engine. Since the engine and transmission are bolted together you only have to hold up one. Good luck! 🤙🏻
@Edwin-po8jr2 жыл бұрын
Does anyone know what are the size of the bolts for the bracket?
@Kevstipsantricks2 жыл бұрын
14mm my dude, I said it in the video! 😉👌🏻🎉😎
@user-xz2nj8gw9f9 ай бұрын
is it just on the jacks? no jack on engine or anywhere else?
@susanhawkins46064 сағат бұрын
Shouldn’t need to jack the engine with this method.
@Low-T-Avie2 жыл бұрын
Did you have the shakes really really bad before you done this?
@Kevstipsantricks2 жыл бұрын
Only the engine would shake while idling, and it would move (more then it should) when shifting from park.
@Low-T-Avie2 жыл бұрын
@@Kevstipsantricks mine is doing it at stops and in drive.... 165, I think I should.... Lol
@seezclear Жыл бұрын
Is this an automatic or manual transmission?
@Kevstipsantricks Жыл бұрын
It is an automatic transmission.
@worldbreaker10232 жыл бұрын
I’m a mechanic and I couldn’t figure this out
@trussmedelivery5994 Жыл бұрын
Did you order your mounts online? If so which we’d site. Thanks
@trussmedelivery5994 Жыл бұрын
*web
@holeephook47952 жыл бұрын
None of these guys ever show how they actually broke the bolts and nuts loose. Its damn near impossible to get those bracket bolts.
@laujoyjoy Жыл бұрын
Exactly, the bolts are so tight that is impossible to break loose. Did you end up being able to figure it out?