Fishing Net DIY Everlast Floating Net Extended Handle for Kayak Fishing (like Greg Blanchards Net)

[@RhinoJoeOutdoors]

Note- If you want to remove the markings from the PVC just wipe with rubbing alcohol! If you have any questions please comment below!

[@joelherman2991]

Mix jb weld in a ziplock bag and cut the corner off to apply. Less mess and ability to control where you put it. Nice build!

[@RhinoJoeOutdoors]

That is genius! Thanks. I’ll do that next time.

[@Trav918Fishing]

I love the zip lock bag idea! I’ve always just used the packaging JB comes in.

[@rudegunner5661]

Great video!!

[@RhinoJoeOutdoors]

Thank you! Glad you found it helpful.

[@jmwalls73]

Thanks for this. Perfect modification.

[@RhinoJoeOutdoors]

Thanks Jason. Tried to break it down so it was easy to follow. Thanks for watching and if ya have any questions please feel free to ask

[@mikecraig9007]

Love DIY vids and yours was very good and easy to follow.

[@RhinoJoeOutdoors]

So glad! Thanks for commenting

[@Mellyfz]

Exactly what I was looking for. Thanks!

[@RhinoJoeOutdoors]

Glad to hear that! Thanks for coming by! Let me know if you have any questions!

[@Mellyfz]

RhinoJoe Outdoors got mine finished. Perfect!

[@mr.verducci1971]

Thanks for making this video.

[@dougiemac8417]

Awesome video!!! I need to extend my landing net handle. I love your method. Thanks millions!!

[@RhinoJoeOutdoors]

Thanks for the kind comment! Glad to see it help someone!

[@claudiaweber7011]

Great video! Thanks for posting. 👍😎🎣🐟💦

[@RhinoJoeOutdoors]

Thanks for watching! Hope it helps you

[@fishingandhunting6ftshark77]

Awesome modification!

[@RhinoJoeOutdoors]

Thank you! It’s served me well. Use it to push off the boat ramp and off objects often and it’s held up great

[@tlashley]

Perfect. Thanks for posting!

[@RhinoJoeOutdoors]

Thanks for coming by and I hope it helps ya out!

[@seanycha]

Can't you just use watwrproof silicone to Seal the ends and screw hole. It should work the same right?

[@RhinoJoeOutdoors]

Yeah you should be able to!

[@prynceal6762]

Thanks! On point!

[@RhinoJoeOutdoors]

Thanks! A nice winter project! Thanks for coming by and commenting!

[@bobbybass1944]

Awsome!!

[@RhinoJoeOutdoors]

Thanks for watching!

[@rodrigoelgu]

I went to lowes but found the pvc too heavy in my opinion so I used a piece of aluminum tubing that fit it perfectly instead

[@RhinoJoeOutdoors]

Hey! Whatever works .. works. That’s a great idea

[@michaelflowers1318]

Nice video! Going to do this with mine, I’ve been using it with the standard short staff for a couple years, time to extend it! Also, my baby listens to the same tunes when she sleeps 😆. I normally have my baby monitor out in the garage with me when I’m tinkering with stuff at night. I heard the music in your video and had to pause because I thought I left the baby music on in my daughters room

[@RhinoJoeOutdoors]

yeah it really helps a lot. i love mine. actually use it a ton to push off objects and the shore.

[@1221Ralph]

So is the pvc pipe 1" ID or OD?

[@RhinoJoeOutdoors]

It’s Schedule 40 PVC which is sized based on the inner diameter

[@1221Ralph]

@@RhinoJoeOutdoors thanks!!

[@RhinoJoeOutdoors]

@@1221Ralph my pleasure

[@remnard1]

Should have drilled the screw hole after the jb weld dried so you didn’t have to line it up. With the bungee hole just take a tight fit washer and slide it over the bungee after the end cap hole. Then knot it.

[@randalljones6844]

Do u have to wait for the jb weld to cure before wrapping it or

[@RhinoJoeOutdoors]

No it will be fine to dry out.

[@litahsr.8226]

I would have use the green noodle so it wont sink if you dropped it

[@RhinoJoeOutdoors]

It won't sink because the net floats and the pic handle is filled with foam. It completely floats!

[@rickbarnesmusic]

Nice video! Have a look at my channel and sub if you enjoy it 👌