Tested | Remora 490 with Suzuki 115HP 4 stroke

We met Jason Olivey for the first time in his shed on the Central Coast of New South Wales. It looked like any fibreglass boat builder’s shed - smelling of resin and covered in fibreglass dust.
There were several boats in various stages of construction. One in the mould, one mid-build, and one on the trailer nearly ready for delivery. And like all boat manufacturers he assured us that his shed was too small and he was on the lookout for a new one. It looked like an honest call.
Remora Boats isn't Jason’s first manufacturing venture. You may have heard of his brand of Remora oceanic trolling lures, that originated in his lounge room while he lived in Sydney.
You can watch the full interview with Jason by scanning the QR code hereby, but he is a lifelong boat builder and always wanted to make his own brand of niche boats. We met him right at the start of his journey.
At the time of this boat test he has finished several boats, but had many more on order. Over the years this hull size and shape has been popular with boat renovators, and the ability to buy a new one off the shelf with no wood in the construction is very tempting for many anglers.
“You won’t need to replace floors and transoms in these rigs in a decade or two. Your kids will be re-powering them, not re-building them,” he said. That’s because he uses Therma-lite in the floors and transoms where plywood used to be the material of choice. It’s a full composite build that has nothing to rot.
After checking out the factory, we headed to the closest Remora dealer - Mak Marine just south of Newcastle. They had just finished fitting out a black 490 with a 115 hp Suzuki outboard.
Brendan Macdonald and his team from Mak Marine were excited to get the rig on the water, so we tagged along to do some filming. You can watch the video boat test by scanning the QR code on this page. It was a late afternoon on Lake Macquarie with only a small amount of chop. We took turns taking the rig for a ride.
You need to remember that this is just a 4.55m hull with a pod. Its light weight gives it responsive performance and versatility when it comes to beach launching or accessing difficult areas. It’s not going to have everything a 6 to 7 metre boat has in it.
Storage is basic, with side pockets and some area underneath the console. The test boat was fitted with a framed lean seat that can keep a cooler under it but there is also the option of a fibreglass storage and live well combo in the helm seat position. Some will see this as a negative.
The floor is kept at the same level throughout. Some people may want a raised casting deck (and the storage that comes with it), however this trades-off gunwale height, which you’ll likely need when fishing in the ocean.
The console seems proportionally the right size and there’s a handrail around the top of it that’ll be handy when it’s rough. It fits fish finders up to 16”, bracket mounted on the dash. Small touches, like the customised Remora switch pad are neat.
We also liked the mounting for the electric motor on the front - some clever stainless steel tubework presents a good looking and practical solution. I assume not many of these built for fishing will go out of the dealership without one.
Judging by the smile on Brendan’s face, we reckon that he was happy with his first Remora.
There was no fuel metering installed at the time of testing, but we achieved a top speed of high 60s km/h with the standard Suzuki 19” three blade aluminium propeller and it cruised nicely at 3,500 - 4,000 rpm. Preformance data is listed in the table.
As tested, this rig will set you back $57,000, however Remora packages start in the late-forties with a smaller outboard. Remora don’t sell direct to the public, so if you’re keen on a quote or a ride, see the guys at Mak Marine or on www.makmarine.com.au. You may also be keen on Remora’s Instagram page - it’s quite active.

[@anthony2682]

Legendary Haines 445f ! Nice looking boat 👍🏼

[@huntthewild6643]

So far best boat I have owned to date. Have the DF100b fitted on mine and at 25knts I get 4km to a litre. Also handles choppy waters really well. Excellent boat but it does lack storage, only problem I have with this vessel

[@joshherschell546]

Haines 445f for sure! What little ripper

[@stephenlatimer1428]

my first thought was Haines Hunter Prowler/Sea Wasp. will there be different configurations, full casting platforms with SC.

[@craigtillman8808]

Looks like a ripper of a boat. Be good if they had some extra storage and a kill tank. A casting deck would be a great option.

[@remoralures6684]

Kill tank and cast decks now available

[@tonyadams1168]

Nice boat I hope there will be different configurations a live bait tank and a casting platform with storage hatches will be good.

[@FishingMonthly]

There's an alternative main seat base with a built in live tank and storage available - we saw it at the shed.

[@mungbean84]

I wonder will they be adjusting the design of the pod for future boats with the 115 so there isn't the 3in gap between the top of the motor plate and the lip.

[@russianbotstein1422]

Im more interested in that beast of a v17r in the background

[@tomvancil8213]

I would rather option it with the DF100B for better top speed, fuel economy and overall weight ( not to mention lower cost ).

[@mikeulyanov2929]

usd or au $ for as shown?

[@FishingMonthly]

$AUD

[@edwardabrahamiii3742]

Slowzuki one one five