New LED Fishing Light ( like youve never seen )

This LED fishing light is awesome and super convenient to plug in . I hope you enjoy it .
Check us out on
Facebook
/ 997275703941362
For Fishin N Stuff Gear visit the Link below
www.etsy.com/shop/PebsPrettyf...
Check out my wife's channel I have videos on it too
Ta Days Crafts
/ @tadayscrafts
Thanks for watching dont forget to subscribe and click the bell for notifications
Shrink tubing
www.amazon.com/dp/B07GQJ75PT/...

[@stepitup5409]

My money is on this is one of the best channels on youtube

[@csa6119]

Wish we had school teachers that are as passionate about teaching as you are

[@FishinNStuff]

Thank you

[@pnwRC.]

100% agreed!

[@dwayneporteous2463]

Be

[@kirkout7366]

BRENT WILSON - maybe you will become THAT teacher!!

[@frankclarkjr6369]

CSA, that's a no shitter

[@walker614jw]

Hey Keith. A little change in your shrink wrapping of the wires. Before you shrink it, squirt a dab of silicone in the tubing. Then press it to the center with your fingers, around the bare wire, and then shrink it with your heat gun. That way it will help seal the bare wire inside the shrink tube. If water leaks into the pvc it won't come in contact with the wiring. I do that anytime I'm wiring something at work that is in a wet environment!

[@FishinNStuff]

That's a great idea man . I'll start doing that . But I don't think that light needs it . There's so much silicone in big ends ,,, no way its leading lol

[@papawhelp]

Great idea, Thanks!

[@lindsaymathis2749]

That's the way I do it for my bully netting lights

[@maximusramirez1703]

What kind of silicone?

[@Scott.Farkus]

That giant heat shrink worked better than anything I've ever seen.

[@FishinNStuff]

I agree

[@robertrobles4038]

What size and from where? But a very cool video thank you

[@t3angling575]

Man, you got more fishin's hacks for damn near every situation. Love it. Simple, easy fixins. Thanks for all.

[@emilwoodsIII1970]

This is your BEST FISHING HACK 👍🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿

[@thomaswolf6507]

Best DIY fish light I've seen yet, I was actually considering something similar - saves me the research. Now I have to decide if I want to cannibalise my light, because mine has an adapter for power to go with my Jackery power station. I plan to get into deep cycle batteries and found yours in a 2 pack on Amazon at a nice cost; all my power is renewable anyway so I guess it doesn't matter what I charge, although the goal is to go solar eventually.

[@SeattleRingHunter]

Damn right those ratcheting crab claw PVC choppers and the best for fast clean cuts! Best tool for cutting PVC pipe ever, no mess, less effort snd fast cuts! 👍

[@joegonzalez2818]

Love how you do TA-DAY videos for the simple diy-er’s

[@Lightspeed30]

Heck yeah dude! I like that light and shrink tube idea a lot! Awesome build man!

[@HighRoad317]

Awesome build fishing n stuff!!! Great times in the shop!!!

[@mikekneze9817]

Awesome. Your projects amaze.

[@davidmcduffie1398]

Great idea, Thanks !

[@bryannicholson843]

Another awesome video! Thank you!

[@benwilliams1157]

Awesome job! Great video!

[@geraldfranz9085]

BOOM !!! There it is !!! As always your builds are top notch, I'm a diggin it !!! Thanks for sharing brother, tight lines and fun times. Peace 😎👍✌🖖🐟💥🛎

[@rodneyrussell8442]

Another awesome diy build ta-day for ta-morrow, exxxcelent! Sir

[@timothymcvay7286]

Love it great job

[@STRETCHFishing]

Great job!!

[@psychonursehomestead9680]

It’s just gets better an better brother!

[@samthompson1270]

You have such great ideas and I really appreciate the way you go into detail on how to build things. Awesome channel and thanks for sharing. Keep em coming.

[@FishinNStuff]

Thank you Sir

[@charleswallace5818]

That is pretty cool. Going to build one of these

[@daviddura1172]

nicely done!!!!

[@IberianCraftsman]

for those that wanna use them on the shore by walking without carrying 4Kg of lead battery, there are lithium batteries of 12 and 24V in Amazon and Aliexpress with that DC connector so you don't even have to cut the cables, you can just connect it, and the batteries are rechargeable and come with a switch, all quite easy, they go from 6 to 30€

[@joebuck66]

Sweet light. Think I’ll make me one just for fun. Great diy thanks for sharing

[@themadtatter4055]

Loving this channel now all I need is a frikin boat 🚣‍♀️ lol 😂, ty for all your advice sir.

[@michaelrogers8912]

Awesome green light ! I really like that idea of the clear heat shrink 👍. Take care, and stay safe 🤴

[@paulhuval]

I am new to watching you here and really enjoy the different ideas you have this is great..👍

[@Pennfan5]

I'm going to have to build one and try it for shrimp here in florida. Thanks for the video! Love your stuff!

[@OverlandOne]

Another excellent and informative video. Thank you.

[@jeffbrummette6357]

That plug was a stroke of genius! Great job!

[@irtyersenu1709]

cant wait for the field report with this light sir ^^

[@roymichael851]

Wow!!!! Super cool idea, love the heat shrink and the plug idea. You da man, again....

[@victoraguilar159]

Love it and stuff 👍👍

[@adamc1515]

Awesome video! Thanks for making everything easy to understand and sharing your great ideas!

[@FishinNStuff]

Thank you Sir for watching

[@Battlenut1]

I love the music on this video. also Thanks for the DIY, this one was really interesting. Subbed and awaiting new videos.

[@FishinNStuff]

Thank you Sir

[@rider660r]

I bought cig lighter plug&socket from Amazon and used on the ends and added to the boat and just plug them in when I use the lights,fish finder,etc. I have also made a white light just like this to use while bank fishing.I took a lil plastic "ammo can" style box from Amazon and wired in a 9Ah 12v with a cig lighter socket.I also added a eye screw to the top of the light and use a 100' piece of para cord with a 6oz. bank sinker on one end to toss it up over any limbs,tele/TV cable lines to pull the light up to what ever height I want it at...up to 20-25' (length of wire to my battery). A SAE plug will work too.

[@chadpope5320]

Heat shrink tube idea sounds great 👍

[@jmac6242]

Now That's Awesome... Really like that light!

[@dman8853]

i'm so glad i ran across this. i was thinking about making a light because its so much cheaper, and you did all the leg work for me. thanks

[@jimmeyers6070]

Love your videos you have some amazing useful tips that I have used several of and plan on using more. Keep up the good content.

[@FishinNStuff]

Thank you Sir

[@dankrueger6550]

Very good video. We've been doing this for the last 5 years works great!

[@goyaklarh]

That light is freaking awesome ! Great job Keith !

[@FishinNStuff]

Thank you sir

[@dalehayslip5008]

Now that's a awesome freaking light

[@wc164]

Nice like that heat shrink

[@davidstradtman8232]

I always look forward to what I'm building next. Great video as usual.

[@FishinNStuff]

Lol

[@danielholland4385]

Made my own… this thing rocks

[@jamesfisher7410]

I love your builds

[@FishinNStuff]

Thank you Sir

[@PalmettoCats]

Sweet deal! I love the plug idea!

[@FishinNStuff]

Thank you Kevin

[@aaroncurry279]

Man, I don’t even fish and somehow ran across your channel. I love your refreshing, entertaining teaching style. I’m sure I can use some of your hacks and know-how somewhere around the house. You, Sir, have earned another subscriber! Awesome job!! Thanks!!

[@FishinNStuff]

Thank you . I agree some of the techniques are what interests me because you could use them in different ways . Kinda like the epoxy tumblers people make now , well that's the way they have been making wooden lures for years . They dip em in epoxy and rotate em till dry . The ideas are what's important

[@aaroncurry279]

@@FishinNStuff well, just sayin, you certainly have earned my respect. Thanks again. I’ve enjoyed many of your vids the last couple of days. I will certainly share your channel with my work buddies that happen to be into fishing.

[@genesloan3175]

Now I like that. I recently discovered my retail float light had the plastic case broken... So I'll be doing a light line like this. The heat shrink tube is great idea.

[@mattsearcy2194]

I'll use that here in Florida. Works great for shrimping

[@Jfishandlawncare]

I enjoy all the videos

[@general8109]

Extremely practical video..easy to understand

[@timnaessens4316]

Yes Sir 👍 Why buy it when you can get the satisfaction of building it yourself 🇺🇸 Turned out AWESOME as usual 🎣🎣✌️

[@wesvalentine5774]

Man that's slick as eel snot! Cool build!

[@FishinNStuff]

Lol

[@ScottBurnette]

Well...This is my next project ! Good Job!

[@dahutful]

Thanks buddy!

[@johnschickedanz7168]

Awesome, now all I need is a boat and time to use it. Thanks for all you do!

[@FishinNStuff]

Hey they work off docks and off the bank too lol

[@jorgedelvalle5569]

I built your second version of the kayak nav light, and had to repair the strip due to corrosion from saltwater. I checked on Amazon not expecting to actually find a large and clear shrink wrap, but ended up finding marine grade with a heat activated glue that seals everyting underneath. The shrink wrap is also thick enough to protect the led strip from getting beat up. It's been perfect for two years so far. Thank you for the awesome videos.

[@FishinNStuff]

Thank you Sir for watching

[@transmission612]

Do you happen to have link or part# for the marine grade heat shrink in big enough size for this project?

[@alexbruhn3699]

Frickin awesome. DIY Master!!!

[@FishinNStuff]

Ol thank you Sir

[@RonGyver]

Love your build! My last one I bought is tiny and was expensive. Going to build a big one like yours now!!! Thank You VM!!

[@FishinNStuff]

Thank you for watching

[@DeltaRogueFishing]

Fishin N Stuff, great DIY! I need to make one of these so I can do a night fishing video on my channel! Keep doin what you do!

[@FishinNStuff]

Thank you Sir

[@peterschultz8936]

Man you are FREEEEKKKKKKEN AWESOME!!!! Bucket list fishing trip with you is a definite WANT TOO!!!

[@spencer6764]

Awesome video. Thanks for the videos.

[@steveng.c.8524]

Great job dude

[@theeabster1983]

It'd be nice to be able to put the LED controller in there. So that way you can change the light to white green red whatever you would like. Thanks for your time. Excellent video

[@rodneyhardee2527]

Nice job brother

[@donaldmcclain1240]

I have to make one, LED is the best lights ever!

[@elchiludo4004]

Another great video

[@waltertx.6020]

If you haven't seen this channel before, stop right here and watch it. 🛑 This is an Awesome Channel 👍

[@FishinNStuff]

Thank you Sir

[@josephlassiter1412]

The plug is a great idea

[@GabzFamTv]

You really are a genius man!!! Kudos!!!

[@FishinNStuff]

Thank you Sir

[@coder010]

You are the bomb! Thanks for sharing.

[@michaelyost1490]

That was very good‼️‼️‼️‼️‼️‼️‼️‼️

[@robertlenear3918]

Very nice, this might be a build in my future, keep up the hacks.

[@kenbobca]

I'd enjoy going fishing with you. Great videos. Keep up the Good Work.

[@kenbobca]

Don't worry, I have my own boat and besides, I live on the West Coast, too far away.

[@robmclaughlin420]

Awesome light

[@w.w.oklahoma6010]

Keith, once again you knocked it out of the park Brother!!! Worth $50 in the first night's catch!!! It's time to clean, cook and chow down, Amen!!! w.w./ Oklahoma

[@FishinNStuff]

Thank you Sir

[@faronmastin8683]

What an awesoe build the heat shrink was a genius idea. Good job.

[@FishinNStuff]

Thank you Sir

[@allenandmain]

Awesome thanks

[@mikeensor9012]

My bass boat has black light jacks (3) front rear and center in the top cap. I put guitar plugs on all my lights(2 black , one green flood) going to build one of yours for anchoring down for crappie at night. Gonna go a guitar plug on it after seeing your plug idea!

[@blaircox1589]

Cool idea and work great...when not illegal in your area 😜

[@williamsdesigning1949]

Thank you man!

[@txtiger6927]

I saw that little battery and I thought you were building a self contained floater you could put out and move back to fish it. but this is cool I did one of the no cover versions last year, but I got to copy this.

[@nathanmorkovsky2855]

Awesome 🎣

[@johnsimons9039]

This little light of mine. I'm gonna let it shine. Great job. Awesome 👍

[@FishinNStuff]

Haha i remember singing that lol

[@jerrylittle8922]

Good job. Thank you for sharing.

[@FishinNStuff]

Thank you for watching

[@keithwalker9096]

I work at Cabela's and so many times I get people that are brand new to fishing and they want to ask me every question under the sun. I recommend every last one of them to your channel. I love fishing and I could talk about it all day long, but I can't get productive stuff done talking to people for 2 hours, so I send em to you! I hope they enjoy their stay.

[@FishinNStuff]

I really do appreciate you doing that brother. I like helping ppl , and thank you for your help brother

[@bram5232]

Thanks for sharing Sangat berguna senternya

[@thehauntedkobra8261]

Love your passion for your projects. Just found the channel and having a blast watching. Kinda like the idea of one of these lights, just for the garage. But, I might suggest when covering with heat shrink, maybe cut the ends, more like a battery wrap? Where it slightly overlaps the end. Still awesome!

[@FishinNStuff]

That's a good idea . I was just trying to clean it up . It's water proof with or without the wrap . I appreciate you watching

[@thehauntedkobra8261]

@@FishinNStuff Oh it looks amazing and a lot tidier with the wrap. Just kinda my thoughts with wrapping a lot of batteries 🙂

[@SluSharkND]

You are right, Buddy. They DO make everything, but I seem to see it here first. Shrink tubing is the new duct tape, that stuff is awesome. Keep up the great work! Love this channel.

[@FishinNStuff]

Thank you Sir

[@rickgarcia5201]

Love it.

[@KyLakerat78]

For a neat clean install, you can run your trolling motor wires thru the deck near the trolling motor. Then put ring terminals on the wire and put them on the BACK side of the boat plug. No more wires across the bow...unless you plug in your green light to the now-empty trolling motor socket!

[@Tacklefinlures]

Great video brother! Can you make a rod bender for small projects? I’m looking to make a rc roll cage and gonna need to bend a few aluminum rods. Thank you sir for sharing your love!

[@peoriaos6627]

Another great video!

[@stonewallpi1]

Great video friend! I'm about to build a green LED light for squid fishing this winter! I'm going to use some of your expertise to tighten it up!

[@FishinNStuff]

Thank you Sir

[@oklahomaoutlawfishin9026]

I like that light

[@Inpreesme]

Thank you

[@LBZOverlander]

Thank you for this video. I bought a green blob from amazon back in 2020 for $300 and it lasted less than a year. I'm going to try and refurbish it using your techniques. Thank you!

[@FishinNStuff]

I will say , the better LED Light you buy the longer they last generally . But honestly I buy cheap lights and tend to get a couple years out of they most the time . Just make sure it's water proof

[@LBZOverlander]

Yea, I thought it was water proof but it’s not. It has that shrink wrap. I think adding a ring of silicone around the top and bottom before heating could help water proof it. Where do yours fail?

[@FishinNStuff]

@@LBZOverlander i normally end up giving em away before they fail . The last 2 videos I made of them are still working .

[@LBZOverlander]

@@FishinNStuff Rub it in... haha. Soooo I took apart the green blob and it's essentially what you built (damn near exactly). Only you did a waaaay better job and probably spent a lot less. I've spent my fair share on "stupid tax", go ahead and add this to it. I'm rebuilding it using your video.