Fitting Portal axles to your crawler Tips and review of chinese axle for SCX10 II

Video about the caviats (and how-to) of fitting portal axles to your RC Crawler and review of a chinese portal axle.
I'm using an SCX10 II based vehicle but this applies also to redcat gen 8 or Traxxas TRX4 or any other Crawler / trail truck / rock racer
Axles:
alitems.site/g/1e8d114494539e...
BODY
alitems.site/g/1e8d114494539e...

[@bjoka77]

Hi. You did very nice work. I am thankful for your informations. I have got the same problem with the higher position of the weight. Greetz✌️

[@cliffcampbell8827]

You could also take a different set of shock towers, clip off all unnecessary parts and bolt the modified towers to the towers that are bolted to the chassis. You won't gain any additional room under the battery tray but it is a lot easier than making a new chassis.

[@RC-jr3th]

ferm bak, word mijn volgende ride!

[@bratcafe5632]

My Portal axles are manufactured by Shimonda, and include bearings on the steering....$117 US(!)

[@Webb4RC]

Nice

[@Webb4RC]

I bought a set of portals on AliExpress from BDXRC they are pretty nice hope they hold up. Question, the set I bought has spiral ring and pinion. Is there a set of non spiral ring and pinion gears that is compatible? I don’t like the spiral gears so i will be hopefully replacing the front and rear. If I can’t replace them I guess I’ll underdrive the front and rear to 24t front and rear. I don’t know why but the ones I have in a set I have has 33-8 front and rear but the front is giving me issues it hangs up rear is fine no issues.

[@stephenr6427]

Sell the chassis you designed to people great informative video thanks for sharing

[@johnnyslns9938]

How did you like this portal axle? Can I change the angle of the caster?

[@polishguywithhardtospellna8227]

Great, competent review Sir. I'd add, with Chinese parts, it's probably worth just tightening bolts and dry run the car for a bit before starting to replace bolts to stainless. Some parts can be utter garbage, snap right away, and it might not be worth all that work. Better make sure they hold up first.

[@MyChannel-qc6cl]

My rig lost 50% the speed after im using this axel..what can i do to make it faster..

[@rchobbies4479]

beautiful, you had to modify the chassis?

[@zatanaxkill]

nice tip 6:20

[@lopiklemoustique5513]

Hello great speaking, i think i can see a cran on the right side of your axle Can you send me the link of the replacing joints for this crawler ? Thanks for responding me

[@jellevandeplas]

Hello, here you go: € 7,31 30%OFF | Heavy Duty Universal Front Rear Joint Axle CVD Drive Shaft Dogbone Portal Output Gear For 1/10 Axial SCX10 Metal Portal Axles a.aliexpress.com/_mqpEL75

[@lopiklemoustique5513]

@@jellevandeplas thanks a lot m'en

[@SlavaRC]

🥰🤩💥💯👍👏

[@jeeper0186]

What body is that?

[@user-mj6ls1kd3j]

Injora hard body

[@charlesdipanni3725]

Brass bushing

[@DrBwacko]

Just seeing this. You should had titled it SCx10 CLONE. There is nothing on it that is from Axial