Fitting The Smallest Gear On Any Bike!

In today's Tech Thursday Phu Vu from Epic BMX (@_epicbmx) walks us through on the only options for getting the smallest gear on any bike. Whether you're on a BMX, road bike, fixed gear, mountain bike, cruiser, or unicycle this video will walk you through the bicycle gear ratios!
Join this channel to get access to perks:
/ @alfredomancuso
Thanks for taking the time to watch my content! If there's anything you'd like to see, please let me know in the comments, and if you can, don't forget to drop a like!
If you'd like to support me:
For merch visit: www.AlfredoMancuso.com
onlyfans.com/a...
/ alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredo.mancuso
Snapchat: AlfredoMancuso

[@keam210tx]

Damn, Phu got so hyped talking about cogs he showed his “oh” face 😂

[@revvolutionz]

Master Phu is spittin 🕺🏼

[@isaiahcabreros9900]

Cattset

[@jimbo80982]

Fr

[@trinitydoe3243]

I have 12 tooth freewheels that fit the bigger side.. also, Mongoose makes wheels that have only 1 set of threads that are the smaller threads

[@AmazingChinaToday]

We need a 16 tooth freecoaster ⚙️

[@MikhailSkulls]

I have that SE wheel set on my Cru Jones tribute bike.

[@rcoreyw91]

How about a frame walkthrough? Explaining the pros and cons of different sizes and angles of bike frames that make them more suitable for street/park/dirt. I've seen quite a few frames with similar specs even both full chromoly but one could be 4.5lbs and the other 5.5lbs both within +/- .25" TT . where does that weight sneak in? Should you start worrying about frame lifetime/durability if a bike frame is too light?

[@francismanuel5485]

There's a 12t and 14t freewheel named "YU QIU" it's a chinese company

[@SheepeyRace]

Might have some gears for you to look at over here 🙎🏻‍♂️

[@DirtDigglerDetecting]

Hahaha i used to take the old kids rims with coaster breaks and remove the pads inside and make it a freewheel. HAhaha i miss the 80's.

[@oscargahnstrom7686]

On my ns bike i've got a octane one hub and it only has the small side so i have a 13t freewheel on it.

[@Ktmsxcap]

Phu is it possible to put on a bmx bike 28 teeth and the rear 16 teeth

[@احمدبايك]

I'm from Iraq, I always follow you

[@dirt7258]

Help!!! I bought skyway with 9t cassette from a jackass on ebay.he had grinded the 14mm axle to fit his 3/8 dropout.do you have a 14mm axle to fit new skyway 9tooth cassette in your shop?????

[@429supercj]

My 2021 OM flyer has a flip flop on it, I was really surprised.

[@mikehagen3785]

Haven't seen a Phlip Phlop hub in a couple decades..... .damn. wish I could still do a Decade

[@johnclaudundag4132]

How much the profile elite racing hub cassette and how much the eclat crank 3pc and how much the eclat sprocket and how much the frame we the people

[@nategar5058]

Video suggestion; i have an issue that im sure many others have or have. I thought i bent my pedals replaced them and I can still feel the wobble. I'm sure its the cranks they have a lifetime warranty but i cannot pinpoint the bend or twist. What do i do?

[@dennieferguson4701]

Is it 48 spline? Or 8

[@nategar5058]

@@dennieferguson4701 48spline 22mm Merritt Battle Cranks. Update i took my cranks apart and when i put them back together they felt fine again. I think i slipped a spline but there is no visable mark so idk.

[@bjimbosld]

I have a modern day skyway that with the 9 tooth cassette. Do they make a driver that has a larger tooth count than 9 ? Like a 12 or thirteen?? I don’t mind buying the whole assembly but I don’t like being stuck with only a nine because I want to run a slightly larger sprocket for what its on. Thanks for any help

[@eyeseayew189]

You still can, but it depends on the ratio you're trying to achieve.

[@bjimbosld]

@@eyeseayew189 Lets say a 3.5 I have larger old-school sprockets/chain ring for the front. Where do I buy such a thing for the skyway?

[@eyeseayew189]

@@bjimbosld for modern day cassettes, I think it can only go up to 11T. Stolen makes 10T and 11T drivers. After that, it's all freewheel. They go from 12T and up.

[@verdden3474]

Master shi PHU

[@trinitydoe3243]

The 12t for the bigger side are hard to get, as there's only the one company that makes them, but normally that big side goes down lower than 16, I think it's 14. I know 15 for the bigger side is common

[@andreuasencios3620]

freewheel YU QIU

[@justinscott1256]

Don't forget you'll also want to get a new sprocket or chainring if you change your rear hubs number of teeth!

[@randycollins2607]

🔥🔥🔥🔥

[@aurteekay6339]

“Here’s the good thing about a cassette” It’s sounds like a money counter while you roll down the street 😂

[@colechandler1483]

Did Ryan not want to do a vid?

[@ericbeenemy9530]

I Love this channel it's like Family Guy and Reading Rainbow mixed together meaning it's funny but so informative

[@cfmechanic]

It won't fit its too small!!🤣😂 that's what she said... I love flip flop hubs that's how I put disc brakes on my 20in then later my 24. Old school

[@shaunbullard8772]

My 29” Sunday high c has a 13t freewheel but isn’t a flip flop, is that a uncommon size?

[@BerserkerNick]

There's hubs that are made specifically for 12-14t freewheels

[@TuesdaysTurn]

Yes, it's uncommon. Fairdale uses them too on the Taj bike. Your hub is M30 threading only, which is uncommon, and in this video he says they don't make them, but they sure do!

[@outtadate]

Also free hack for fixed gear riders, if you have a geared hub with a disc brake, you can remove the disc brake and cassette & screw in a cog where the disc brake would be to make a fixed gear hub!

[@ManuelDiaz-dm5kf]

Skyway does make a mag with 9t cassete

[@BerserkerNick]

I'm running a set on my Hoffman 😁

[@andrewsiasparks]

Track ring locks.. wtf? Foo?

[@hectorn.6137]

If you buy a complete nowadays, is the cassette hub equipped on them the same as he's describing here? Or is this like an upgraded version of a cassette? Asking for a friend.

[@TuesdaysTurn]

Most modern complete 20" bmx bikes come with a cassette with a small tooth cog like 9t. Some of the more expensive ones have drivers you can buy as replacements, and you could get a 10t or 11t, but some of the cheap ones are hard to find (or impossible) if you need a new driver.

[@hectorn.6137]

@@TuesdaysTurn thanks.

[@BerserkerNick]

There's a couple companies that make a 12t freewheel

[@ethixhiggins5059]

Who

[@BerserkerNick]

@@ethixhiggins5059 dicta, senqui, metal bikes

[@judelagcao2090]

That cog in the Gold hub is very similar to the Fixed gear bike because Fixed gear bike has similar cog to this one But this cog was a BMX version just saying guys.

[@edyfromthe3]

Phu still high from the cookie…

[@andrewway3404]

Can I put a 16teeth casket on my 24" Stolen Rampage wheel that came with a 10teeth?

[@50WTLYD]

Thank you Sensei Phu 🙏for the enlightening lesson

[@youngsterstattoos3600]

Is it possible to put a 9 tooth hub on fixie skinny back rim if I take the spokes out??

[@fallenhobbit6554]

Most fixies use a flip flop hub of some sort

[@tugboat8475]

Makes no sense, you been drinking again.

[@dennieferguson4701]

Great video ❤

[@fahadwalalstar861]

Bro can we fix a broken rear hub

[@owen687]

I’m back

[@MiguelAguilar-ce1tf]

Yoo

[@Lilperez661]

My bmx ratio is 20t sprocket with a 8 driver

[@WORTHYJ]

Damn that’s hella small I don’t think I’ve seen that before on a bmx I have 25t sprocket and 9t driver

[@frankgarcia3487]

Will a 15t fir or is it to small

[@eyeseayew189]

Did you watch the video? It was explained.

[@karl11]

I used to have a mirraco flip flop and both sides have the same size. The difference is the threads. One side is for rhd freewheel and the other is for the lhd freewheel. I was using a 13t odyssey lhd.

[@dropzilla8398]

You should do one on wide hubs and wide bottom brackets on like beach cruiser out there

[@potaylor9992]

Awesome communication Great job, simple working conditions

[@JohnReynolds123]

Need a video on proper mounting and adjustment of u brakes. Front and back!

[@baphometazrael1892]

Misleading title man I thought you were gonna put a 16/7 on a bike. That’s the smallest I know of but that’s all flatland stuff

[@AlfredoMancuso]

Little accusatory to call such a blanket title as misleading

[@baphometazrael1892]

@@AlfredoMancuso fair it does say “any bike.” Lowkey wish street companies would offer 23s or smaller just to get it out of the way more IF you end up missing the ledge. So far it’s only Profile and who tf runs a 19mm spindle anymore

[@AlfredoMancuso]

@@baphometazrael1892 hahaha that would be wild

[@chrismartin4925]

@@baphometazrael1892 BSD superlight comes in a 23T

[@nomdeguerre13]

straight and to the point, no sugar coating here!

[@Jordan-yf1nx]

Foo dropping that experience!

[@Rick_Todd]

Awesome. Thank You.

[@santiagoortiz3643]

I see👍