Fitting Thetford cassette toilet in a Peugeot Boxer

[@chrismorgan9110]

Hi, was just wondering is it easy to remove the toilet from the wall and what holds it on? I need to investigate a leak and would be easier if I could remove the toilet first.

[@calzydownunder3497]

Fitting the external door is something you should have shown, like many videos they dont show important parts

[@mangozz7397]

Brilliant, just what I was looking for. Where did you get the template for the cassette door hole?

[@paulgarner3981]

Hi the template came with the Wc

[@ahthud1]

Hi, I know this is an old video, but just starting on my conversion journey. What is the depth of your subfloor? Im worried about having to cut the lower van rib to get the external access lined up on the bottom.

[@leeblackbourn3062]

How did you fix the toilet to the floor and wall buddy?

[@bellrobert1978]

I'm fitting this unit in the same spot and the same van. I'm stuck on the water inlet to the toilet tank. How did you do this? Their is too much space between the two. Is there an extension kit?

[@GerryScanlan-k6s]

Hi Paul I have a Thetford C223CS. It fitted but I am struggling with the wiring. There is a plug with 4 wires however I only first fixed a positive and neutral to the toilet position. I have wired the black and red wires together but its not working. Any advice would be greatly appreciated. Thanks Gerry

[@paulgarner3981]

Not sure, I wired black to black and red to red and it worked 🤔 have you checked your live and neutral are live, and connected at your fuse board ?

[@GerryScanlan-k6s]

@@paulgarner3981 Thanks for responding Paul Yes the the live and neutral are live and the fuse is good. Everything else is working correctly on the van. Any idea what the blue and grey wires are for?

[@quadrigacars2776]

@@GerryScanlan-k6shey Did you find out ? I’ve got the same - 4 wires

[@GerryScanlan-k6s]

@@quadrigacars2776 Hi I just wired the black and red, cut and taped the other 2 up and it worked

[@GerryScanlan-k6s]

The fuse had tripped which is why it didn’t work for me initially

[@verbal169]

Couldn't you raise toilet floor to avoid cutting black plastic outside trim?

[@paulgarner3981]

I could have but I wanted to maximise ceiling height, I would have needed to raise floor by 60mm +

[@AusJD]

Where did you get the shower surround. I have this toilet but need a surround not shower

[@paulgarner3981]

I used plastic shower panels, they tongue and groove together, I used the same panels on the ceilings too, they worked really well

[@AusJD]

@@paulgarner3981 Thanks Paul

[@gbwildlifeuk8269]

Pointless! You left too much out!