Fix Baby Brezza Advanced Pro E3 error code

[@imattypattyi]

Brother you are an absolute national treasure. You just saved us hundreds of dollars because we were 6 months out of warranty.

[@PatrickHaley18]

I wasn't about to throw this thing away over some error code. It's been working perfect ever since I made this video.

[@huachunliu8510]

Thank yout! It's very useful. For people viewing this video, if sucking didn't solve your problem, blowing air may solve it!

[@PatrickHaley18]

Ha I probably should have started with that

[@andreww3296]

Sorry silly question. But how do i get the black plastic off? Which screws?

[@PatrickHaley18]

@@andreww3296 There are a bunch of screws on the bottom of the Brezza you have to unscrew first. Then you can gently pop apart the black sides from the main frame.

[@dwaynegrear8311]

You don’t have to do all that . Just fine something to dispense the water with. Once the water empties it should be fix. No reset need

[@bofadelalbloshi2941]

I do same what u do but still not pumping water

[@cheshire1515]

Mine is showing error E3, it’s dispensing water but not formula. Iv cleaned it out and always put a new funnel in every 4 uses. The formula part is not turning.

[@Petigapolisen]

Question, if a still got E3. What can I do? I try to blow and suck. But still doesn’t work… 🤷

[@MrBa143]

Found a used brezza for 30$ (albeit pretty and seemed to be in well condition) and i figured something was probably wrong with it (even though i dont support people selling 'broken' stuff without clarifying it) - And yeah, it was the E3 error and this fixed it.

[@jadeellingson4392]

Thank you for this tutorial!!

[@matthewhohmann2913]

Saved my bacon. Had a hand me down that I couldn't get to work. Thank you!

[@marianujic3495]

Thank you so much,we just fixed ours

[@rahimaferhat9333]

Please help me to solve error 1

[@gerald100112]

Me too

[@heatherhaley3901]

Great camera work

[@samuelgomez4673]

Hola, tengo un codigo de error E4 tienes la solucion, gracias

[@PatrickHaley18]

knowledge.babybrezza.com/s/article/FPA-E4

[@andreww3296]

Sorry silly question. But how do i get the black plastic off? I have this very error code.

[@PatrickHaley18]

There are a bunch of screws on the bottom of the Brezza you have to unscrew first. Then you can gently pop apart the black sides from the main frame.

[@andreww3296]

That’s great info. Thank you!

[@valentina-qi4zx]

Do you know how to fix Error code 4?

[@PatrickHaley18]

knowledge.babybrezza.com/s/article/FPA-E4

[@jusgrim]

Great video but mine still gets E3 error code.

[@15mh]

Same here

[@PatrickHaley18]

@@15mh @jusgrim someone else also suggested blowing to clear the line.