Excellent video and was always wondering why there was so much play in the steering wheel. When we purchased our Cub Cadet XT1 42" at The Home Depot, the steering wheel had a little play in it, which I thought was strange. The failed part is called a "hex bushing". Relaced mine and works great! So, Cab Cadet has a premature failure occurring on a part before units ever get to the retailer or into the field?? Maybe a brand for me to avoid in the future! Thank you for sharing your excellent video!
@CarsonSzprejda10 ай бұрын
U fixed my mud mower thanks man
@mikedriver2423 Жыл бұрын
Great video,good camera &lighting
@justinbelshe2 жыл бұрын
You notice that the replacement part is about half the thickness of the original?
@TomSmith-sr2br Жыл бұрын
Yup, it's the wrong part.
@strokedsrt22905 ай бұрын
I found a easier way to do it..take out the fuel tank by the engine snd you have tons of space..appreciate your video
@philliphall5198 Жыл бұрын
They make two different thickness of that bushings
@dapetik2 жыл бұрын
What's the easiest way to find the part numbers?
@Maleekus2 жыл бұрын
I had this problem with my Murray, the hole in the deck was wallowed out. Crappy steering design imo.
@TomSmith-sr2br Жыл бұрын
Most of them are...sad really. 3,000 bucks for a crappy system...smh.
@markallen61193 ай бұрын
Just the steering wheel itself on my LT1046 is loose, not sloppy steering. Is this the solution? Thanks.
@JohnJones-mw1yd Жыл бұрын
You can remove fender on starter side and put piece in .
@Thomas-uw1gq Жыл бұрын
Great , thank you for the video.
@johndallis99012 жыл бұрын
What if they put a bearing there
@klindquist44 Жыл бұрын
I'm changing this part again at 678 hours.second time.ltx 1050
@STOPTHEHATE70 Жыл бұрын
OMG THANKKKKS!!!
@gordbaker8965 ай бұрын
Steering Sector bolts or part are also worn and should be replaced
@kennethhudson80132 жыл бұрын
What size is that nut on end of the shaft?
@jerrymccurry9372 Жыл бұрын
11/16th
@philliphall5198 Жыл бұрын
I AllWAYS drop deck😊
@jamesferron443 жыл бұрын
just ordered parts for the same job...
@J0hnnyDee5 ай бұрын
Thank you
@daley19853 жыл бұрын
why do u need a washer on the bottom part if u have replace the broken steering shaft washer?
@DustanD3 жыл бұрын
Seems it keeps the sprocket thing from rubbing on the frame and possibly catching. Just know it was there when I took it off so should put it back.