fix fish seeker prt 1 full faults ,& fix prt1

common faults repair for fish seeker so you can get back to catching a feed.
watch prt 2 also

[@andrewchild5222]

Have you ever had a hatch that won't open on one of these things? If so, I'm interested to know how you fixed it. Cheers.

[@andrewchild5222]

Thanks for the vid. Out of interest, how long did it take for the motors to corrode like that? I'm looking at buying one, so interested to get an idea on what I'm up against.

[@howtodoityourselfwithstevo]

10 months done up stored in garage,store apart otherwise creates moisture inside it give motors a coat of water dispersing spray or wd40

[@willyryland3563]

Thanks for this information, what I'm going to do is spray my motors with silicone spray. I'll probably do this every time Ive finished using it and it goes into storage till next time I use it.

[@howtodoityourselfwithstevo]

good idea on the silicon spray ,water dispersing spray helps too

[@reagantimothy7872]

Hi there. How do I take the motor out please.

[@reagantimothy7872]

Hi mate, need some help plz.

[@howtodoityourselfwithstevo]

just undo middle allen key bolt pull off the plastic mount motors held by take off wires off course and pull motor out it comes.easy as

[@reagantimothy7872]

@@howtodoityourselfwithstevo Thank you but Im unable to take /undo the middle allen key. it keeps turning and turning... not coming out.

[@reagantimothy7872]

@@howtodoityourselfwithstevo do you know what sort of motor ? do you have a link where to buy the motor ? Please thanks.

[@douglaschell1132]

THANK you ,

[@howtodoityourselfwithstevo]

happy to help many more tips and hints on my channel