fix or repair low pressure washer clogged nozzle

Video about fixing, or repairing a pressure washer with low pressure from a clogged or blocked adjustable nozzle. Briggs and Stratton Brute model number F020290.

[@collincastaneda5701]

Your video was the only only I found online which matched my nozzle perfectly. Easy to follow steps and it worked like a charm! Of course now I have more work to do around the house.

[@nestorph21]

This youtube was a godsend. Saved me $80 as I was about to buy a new pump based on another youtube tutorial. Thanks!!

[@shamalprahith3731]

Thanks alot... I saved $80 as I was about to call a technician.❤

[@timthetoolman4575]

Thanks for the great video. I had an extra wand that had sat for 5+ years and the high pressure jet was plugged TIGHT. I soaked it in my ultrasonic cleaner and still plugged. Took it apart as you did and then able to clean the jet manually. It was plugged so tight I could not get the supplied cleaner wire through it. I ended up using a set of micro drill bits I had on hand that I use to drill out brass gas and air jets in small engines. Pushed a big chunk out of the jet and it works great now! I was about to toss it in the trash. THANKS!

[@davidvelazquez9132]

Went out this morning to wash our fascia before hanging Christmas lights and was only getting water on "low pressure." A quick google search lead me to this video and I was able to disassemble, clean, and reassemble. Saved me a lot of time, frustration, and if I just gave up, money at the local hardware store to replace the nozzle/wand. Many thanks for well made video.

[@cdparisi]

This was exactly what I needed to unclog the nozzle of an Excell powerwasher that I found on the curb. Now that I did this and cleaned the carb and replaced the carb needle (which only cost a few dollars) I should be good to go. THANK YOU!

[@jimrogers4655]

Thank you for posting this! Spent hours trying to fix what I suspected was a clogged nozzle but couldn’t figure out how to get the nozzle out. Even though your nozzle assembly is not the same as mine, the nozzle itself came out exactly how you demonstrated. Very helpful video.

[@katzkatcher]

I agree with Seaside garden . You saved me a bunch of $ . I took the whole yellow sprayer end off and its been soaking in vinegar for 24 hrs now. Now i can take it apart and lube all the parts that need it & i can get busy cleaning this porch that my wife wanted done yesterday .Thanks for the video !

[@gerardi2000]

I really like your video. This should be helpful in fixing my wand. Your presentation was entertaining as well. I am now a subscriber.

[@elainebalogh2447]

I found this very helpful...I actually used this to repair the nozzle on my Devilbis model EXVR4B2321...

[@tedtolentino4955]

Thank you, that was very clear how to service these older wands, which is what my problem is. Knowing how to disassemble the wand was my biggest challenge since there are no readily available instructions. So, thank you for taking the time to share your video. keep up the good work!

[@jimleary1275]

Perfect, clear explanation of exactly how to solve the problem I was experiencing. Leave the power washer in the shed, unloved for a few years and this is what you’ll have to contend with.

[@MisterInjector]

Thankyou! This is what I have been looking for.

[@skijwr]

You sir are a genius. My nozzle was completely blocked. You saved me some headache time. You made it very easy for me to fix mine. I'm back to like new machine with full wand pressure. Thank you.

[@williamgentile997]

Great video, "simple" repair if you know what to do!!! Thx much!!!

[@charleskeoleian9598]

Fantastic DIY video. Disassembled, cleaned out impacted sand in tiny nozzle, and reassembled. Your video saved me time and money. Much appreciated.

[@gman8260]

Awesome. I had no idea how to get this nozzle apart, but you video showed how to do it step by step. I couldn't find a "pokey bit" in my tool box, so I used a screwdriver!!!

[@brianhudson818]

Thank you! This really helped me out.

[@acleon2004]

Thank you for this video, your pace and explanation was dead on. You saved me the hassel of heading to the shop! I liked and subscribed

[@JohnDuran-bo6lx]

Thanks man you saved my day

[@carls8286]

I think you just saved my pressure washer, many thanks! :)

[@hughesurdaddy1968]

This was a very informative video. A+ The best tip was the last 20seconds for me.. how to test!

[@martinhall6189]

Very complete video. I have this same nozzle and needed the complete tear down.

[@Potatoroomr]

THANK YOU!!!!!!! THIS IS ALL I WANTED SEARCHED FOR HOURS

[@eliashernandez9120]

Thank you! Sport on. Exactly what i needed!

[@prabathkumar7831]

Great video .It helped to clean the nozzle. Thank you

[@spicky2966]

well done chief tks -not getting a proper fan stream of water probably nozzle needs cleaning..

[@markli6835]

Exactly what I need! Thanks!

[@thedude5295]

I'm going to try this on a pressure washer somebody gave me a few years back that looks nothing at all like the B&S Brute. Hope it works, because this thing is such a beast it should everything down to the bone if you accidentally pointed it at somebody and I'd hate to have to buy a Sun Joe if I can't get it working.

[@howardlovecraft750]

Once you own a pressure washer you quickly realize just how handy they really are.

[@liquidsnake8101]

Worked! thanks

[@JHOOPBASKETBALLJophCleopas]

I fixed mine using a home needle. No need to disassemble

[@johnpier3026]

Thank you!!! Great help!

[@juanayala3767]

Thanks so much mind was stuck this helped me so!!!!

[@macg5607]

great video man thank you!

[@dn41287]

Thanks I didnt realize that set screw was a noozle the hole is plugged up easy fix

[@Riksession]

Thank you! Much helpful