Fix scanner error 100016 Epson xp-4100

[@richardbergson1047]

Spent some time with Epson support who concluded I would have to send the printer away but as out of warranty a local technician would be the answer. Wouldn't tell me what he thought the problem was. It is beyond belief that they would go through the process of sending a machine back and forth for a loose cable. Thank you for helping out. Took me 2 minutes to fix.

[@ericksaint3837]

Second time I've used this printer out of the box and I got this error. Exactly the issue, bottom ribbon was completely out. This fixed it in no time. Thanks!

[@randyhoseajr.8935]

same here thanks!!

[@ZoltanOcskay-ht5qf]

Hálásan köszönöm Magyarorszagól. Sikerült megoldani. Valóban ki volt csúszva a vezeték. Azóta működik szépen. Köszönettel Zoli

[@markholbrook8270]

Thank you thank you. I have been trying to fix my Epson XP 4100 for three days. Now it works.

[@sambo0047]

Oh this is awesome. Both cables on the XP-4105 were out. Easy to put back in with a pair of needle nose pliers. Thanks so much for the video.

[@777DEN7771]

I found an Epson XP-4100 printer at a junkyard, I wanted to take it back, but your advice helped me save time

[@thekeslercats]

I have a 4205 and was getting this error. It was a brand new printer also. Your video saved me a lot of time and frustration!! Thank you!! That one wire was the problem and now it’s fixed and working great! Thank you so much!!!

[@chriscn6717]

That's amazing!! Worked a treat .. (second attempt, when I pushed the bottom cable back in - only harder - with a pair of pliers). Great video. Best wishes ~ from Chris in the UK.

[@bwe1223]

Thanks for the video. Well done - this is the second printer I've fixed by watching KZbin videos. Mine had this error right out of the box. I opened it up and the cables looked fine but they weren't. I pulled the blue tab on the cord and the cord slid out from the clip (i'm used to having to pull out by the clip but that wasn't the case here). I slide both cords out, secured them back in, powered on the printer and the scanner "bar" immediately popped back into place. I got the error one last time, powered on/off again and now it's working as it should. Definitely some type of manufacturer defect here.

[@solosymphony]

I dislodged my cable when doing a manual nozzle head cleaning, so this worked great, thanks for the quick and clear video.

[@alanpayne1442]

Brilliant, this was the exact problem and easily fixed...thanks a million. Other, so called, online expert solutions about reinstalling software etc was misleading and incorrect.

[@annechevriot6425]

Un grand merci de la part des Français qui n'avaient aucune réponse. Nice job!

[@josandford910]

Amazing - this worked and so easy to fix. Thanks 😊

[@dimwits4663]

Very clear and concise video. Sadly, neither cable on my XP-4105 looks like it's disconnected and pushing them more tightly onto the terminals hasn't solved the issue for me. Having read some of the other satisfied customer comments, I'll go in for a third try and disconnect and reconnect them both... thanks nonetheless for an excellent tutorial.

[@jessbrown1719]

did you ever fix yours? I am having the same problem but both of my cables are still attached.

[@dimwits4663]

@@jessbrown1719 Nope, it's sitting in a corner thinking about its bad attitude. I pursued it via the Epson "helpline" who recommended an authorised repair at twice the price of the printer. I bought a Canon. 🤫

[@mindyourownbiz316]

Cheers for this - I was in a mad rush and as usual when you want something to work in the nick of time certain laws present themselves. Copied your instructions and all is well in the world again.

[@anasoler508]

THANK YOU VERY MUCH FROM SPAIN! Very, very usefull! I fixed the error by myself just watching your explanation.

[@jen_gem]

It works! My cables didn’t even look loose but it worked nonetheless. Thank you. Edit: I ended up returning the printer to Best Buy bc the issue came up again and the fix didn’t work the second time

[@onem4040]

Thank you so much I combined this tutorial with another one for my scanner problem and it worked I'm surprised!! My first time fixing a printer

[@inoub1564]

Thank you so much, I managed to fix the issue following your instructions ! The instructions work as well on printer xp-3100 😃

[@manojpatel5915]

Simply amazing. Life saver and such easy instructions to follow. Thank you. Please keep up the good work and content.

[@carlyg8051]

WOW!! This worked!!!! Thank you SO much. I shouldn't have had to do all of this though on a brand new printer smh, but yay I'm happy I found your video. :)

[@linapatte6114]

merci :) c'est top j ai reussi a reparer mon imprante grace a vous

[@Pantotsm]

Fantastic! All fixed & it's a brand new XP4105 printer. Error message has gone ... phew! Big thanks.

[@patrickanel6303]

merci de cette vidéo elle m'a permis de réparer une erreur de manipulation l'ors du nettoyage des buses . j'avais un peut trop tiré sur les fils nappes en ouvrant le capot plus que ne le permet la tige de maintien bleu merci encore

[@angiefro8710]

Thanks for the great tip. This is how I was able to repair the printer.😊

[@simonstacey9876]

Thanks for this video both cables were out of the connectors so an easy fix when you know how. You are a top man thanks

[@kroakish]

holy shit was this helpful, i was looking around my printer trying to figure out the issue and i was relieved to see it was a fixable problem, thanks for the help!!

[@ChristianEwertsenUK]

Thank you for this! Same problem here with a brand new XP-3105 model - cable was just hanging there, not even close to the port. Not very cool on a brand new product - but fixed now, thanks to you! 😊👍

[@mauriziomerli2505]

Thank you so much!! I was about to take apart the whole printer... You saved me a lot of time!! :-) Fantastic!

[@tim250exc]

Many thanks. This helped me fix my printer/ scanner (XP3100) 👍👍😊

[@ArthurAllen0915]

Thank You @All In One Devices For Making This Video My Cable Had Pulled Lose From The Connector Completly Cheaply Made

[@toetstreet]

I have the XP 3105 and for sure thought I was going to have to replace it, but this video helped me fix it in less than 5 minutes! Thank you so much!!!

[@YagoRosado]

Thanks a lot. As easy and quick as you show. God bless you!👏

[@liebberg65]

The problem was solved by the video. Thanks! 👏🏻

[@shri2995]

Thank you for this! Fixed this error on WF-2810.

[@ffm2101]

awesome - thanks so much! you fixed the printer and saved unnecessary waste

[@leontienbosch6045]

omg thank you! I was about to throw this thing out... printed about 4 things since owning it and this always gave issues!

[@roxannesymington119]

Thank you soooo much!! It was driving me crazy trying to figure this out!! You’re a life saver!!

[@jozefbak6033]

You are great. Exactly the same issue and I was able to fix it by myself.

[@CatherineLeggerini]

Bravo ...sono riuscita a sistemare la mia stampante...

[@otakingincognito9967]

Yeah thanx for your mini guide, it helps me already in 2nd time!

[@jamieparishooper]

brilliant quick fix id looked everywhere thank you sir for this video

[@marziazoli2315]

Grazie! Mi ha risolto il problema!

[@michaelanderson6484]

This was exactly what I needed! Thank you so much for this video!

[@solsticesings]

Oh my gosh, thank you so much! That's exactly what was wrong.

[@guitariste3076]

thank you very much your video solved my problem on my epson xp 3100 printer

[@roadrunner2630]

Thank you for uploading this. Fixed in 5 minutes

[@PeterMorgan-rl9sx]

Thank you so much! It worked first time!

[@cathyjoharahsa6308]

Thank you so much!!! 5 minutes to save dollars on a new printer 🤩👍🏼

[@romainvallee]

Merci pour ta vidéo !!!! 👍👍👍

[@billrees4638]

Thank you. This saved me a big hassle.

[@RitaMiles]

Thank you, I really appreciate your video You have been a big help, thank you again.

[@knightraven4943]

Works on 31XX series too. Thanks a lot 😊

[@adinaelmasry217]

Very helpful, I was able to fix my printer. Thanks for such a useful video.

[@Husky511]

Thankyou. The printer decided to suck back in a printed page and completely chew it up rendering it useless, in the effort to retrieve it I pulled both those cables out of their tabs.

[@tattedsosa]

Bruh! This had me stressed out! Thank you so much you genius !!

[@darrensharpston6215]

Thanks so much you absolute legend

[@RalphAich]

Thank you for this Video! it made my day

[@mariaturkiewicz2712]

❤ dziękuję za pomoc

[@markgb]

Thanks, (XP-4105) both cables were out and after putting both back in the menu is now completely different, also the firmware immediately updated afterwards, I suspect that one cable has been out since purchase and it thought it was a different model.

[@ritaret7045]

Thank you so much, I thought my printer was ready for the graveyard 😅

[@lawrenceswoope7915]

Thanks! This worked on my first attempt. 👍🏽

[@jcblachford]

This was so so helpful and really worked !!. Thank you so much, very clear and concise.

[@Kio109]

problem fixed, thank you!

[@hugomathieu7884]

thx for the video, my issue is solved !!!

[@momochelly]

Thank you very much. Exactly my problem.

[@ChristopherBarton-t4t]

Appreciate this dude!

[@dreyes5173]

Gracias me salvastes de botarla❤

[@sylvainbgo9880]

Thank you so much mate! ❤❤❤

[@dmitry_1890]

It works! Thank you so much

[@josuecampuzano408]

THANKS YOU ARE THE BEST ONE

[@Taopiemonte]

Many thanks, really helpful video!

[@michaelrhineland4419]

Thank you very much, you saved my day!👍🏼😊

[@przemek7315]

Thanks you Man !! It's works !

[@ernestogrueso]

It works, mate!!!! Thank you

[@naimah873]

Thank you most informative

[@sweetpraises1604]

Omg. Thank you Master. You are a godsend.

[@RacoonCH]

Thanks! Got GF back!

[@imanehoucher3580]

Thank you so muuuuuuuuuuch !!!! i love you !!!!

[@taylor188]

thank you your video helped me

[@robertoxani8342]

It worked! Thank you.

[@melissapotenza2582]

grazie, problema risolto anche su modello wf 2810

[@wayneasher2431]

Exactly right. Great advice.

[@Nothing_Israel]

So I received this same error on my Epson 7820, which is a much bigger printer but I hoped the repair would be similar as I could find no repairs online for this error. I popped off the left side of the machine, that part seemed to have the large gears so I hoped that the other part locations would correspond. The interior looks very different than in your video so I am having trouble identifying which cable might be connected to the scanner (if any of them - I may be looking at the wrong side). Is there anyone I can send a photo to who might be able to identify what I am looking at?

[@ColeccionarJuegos]

Great video thx!

[@kanintekommapaett]

Thank you! Much obliged!

[@maxrandom569]

Thanks, it worked!

[@karlathorpe1983]

Thank you so much ❤

[@MrZakaFaka]

Respect 👍

[@thomasmajq2525]

wow thanks so much mate

[@jjsmc1930]

U are a smart guy

[@chrisjones6320]

Needing additional help.. I have followed your instructions and still got the error... Error occurred after I freed a paper jam

[@didierg.1581]

Thx so much !!! 😉

[@moazeem6555]

Smashing thanks for sharing

[@romanzaitsev173]

Thank u so much !

[@paulkendrick174]

Awesome… Works and is really simple to fix.

[@celinelopes6037]

merci infiniment !!!!!!!! thank you so much !!!!!

[@dominiquedelaire2110]

super il detecte le problème les rubans de commande étaient débranchés suite à la manipulation du couvercle .

[@JohnsonLaraxD]

Thank you so much

[@marcio3857]

It's ALIVE !!!!

[@kathleenmarinaccio1119]

I just tried this, and still getting error message! Any other suggestions?

[@andymarshall2634]

Still getting the same results. Anything else