Fix Your Pit Boss Temperature Swings/ Heat Deflector Mod Installation Video

**Buy your Heat Deflector Mod here ($39.99): smokeslikeaboss.com/products/...
Includes 1 patented stainless steel modification and 2 self tapping screws.
Once the mod is installed:
Your controller/temperature probe will read actual barrel temperatures instead of reading the air directly from the fire pot. This means less temperature swings. Improved grate temperatures from left to right. Less fly ash/ pellet dust.
Fits:
Pro 600
Austin XL (Except the New Onyx Austin XL - this mod is not needed)
Pro 1100
Pro 1150 (all models)
Pro 1600 + Elite
Laredo 1000
Rancher XL
PB 1000 T2
PB 1000 T3
1000 SC
1000 D3
Pro Series Combo
Charleston
Navigator 1100/1150, 1230g, 550g
Sportsman 1100 (Will NOT fit 820)
KC Combo
Cabella's Pro Series CB23ETC1
smokeslikeaboss.com/
Facebook Group (200k+ Followers): bit.ly/PitBossPelletGrillPell...
Instagram: / smokeslikeaboss
**Join the largest Pit Boss Facebook group: / 153627291981641
We are a group full of awesome members that love to share our recipes, smoking techniques, pictures and ideas, not to mention helping each other with issues with on the Boss. We have a wide range of knowledge about these awesome grills/smokers. We welcome all new members whether you have experience or you are new to the Pit Boss.
Pit Boss Heat Deflector Mod, Air Gap Mod, Pit Boss Grills, Heat Deflector, Heat Deflector Plate, Temperature Probe Shield, Temp Probe Shield, Temp Swings

[@user-dl8ur6ry8m]

Just purchased. Highly recommend. Much more stable temperatures.

[@thomasrider5852]

Just got mine installed doing my first cook. My controller always was 30-60 degrees higher than temp I set it to. Today first smoke with head deflector its dead nuts at the temp I set it at and has been for 4 hours now. Amazing purchase and worth every penny

[@marineinneed]

Man I ordered it today right now I can’t wait wow

[@smokeslikeaboss]

Thank you for your order! It should ship out tomorrow morning! SMOKE ON

[@r.serrano9377]

Yup! Installed the heat deflector and the open side flame tamer. Smoked 16 burger Pattie’s in various locations on the smoker at 250. All Pattie’s cooked evenly and temps stayed within 10-15 degrees max, but was more like 5 overall. Before it was everywhere and my ribs would burn on the ends if it was not covered by a water tin underneath. Good job man, problem solver extraordinaire!!! Thanks!

[@smokeslikeaboss]

Thank you for your comment. We really appreciate the support! SMOKE ON

[@keithcoleman1729]

Thanks for the clarification .

[@falconsinput2226]

Thanks for that Tom, I’ll be definitely making one👍🍺🍖

[@janaya6469]

ordered one on 06/23/21 for my Platinum Laredo 1000, anxiously waiting!

[@smokeslikeaboss]

Your order is shipping out today. Thank you for the support and SMOKE ON!

[@flgators197]

For the price and quality you get with the excellent customer service, you can’t beat the Austin XL by Pit Boss

[@Ebaybow]

Pitt Boss should have addressed this already. I have installed your mod quickly and easily. Thanks for your upgrade. Pitt Boss Pro Series 1100

[@smokeslikeaboss]

Thank you for your support! We appreciate it. SMOKE ON!

[@mafiasauce6255]

Mine just arrived! Also ordered a new temp probe from the mfr’r free of charge. Hoping this fixes my temp swing problems. Will keep you posted!

[@smokeslikeaboss]

Awesome to hear. Thank you for your support!

[@mafiasauce6255]

@@smokeslikeaboss tested it yesterday with probes on both sides. The ecu and both probes were within 2 degrees of each other at 300 degrees. Works like a boss!

[@smokeslikeaboss]

@@mafiasauce6255 Awesome. Get er done!

[@donnyzarra]

I should be ready to rock in the next 7 to 10 business days. I just sent my Controller in today and I just ordered my new Smoke Like A Boss Heat Deflector Mod. I have the 1150 Pro and it was acting goofy. I’m confident that these two fixes will work like a charm. Can’t wait to get everything back and put together.

[@smokeslikeaboss]

Those two things will definitely make a huge difference! Let us know how it goes once you get everything set up!

[@Serr28]

I have the 1150 as well are you still having temp swing issues?

[@donnyzarra]

@@Serr28 no real swings. I just ordered the Heat Deflector to cover the fire box. I plan on trying it soon. The only problem I have is that the grill doesn’t get up to high temp on the control board. I am going to test it with some bread and an IR Gun.

[@emmyjosumpter9897]

Well watching this makes me feel a little better.i got my husband the austin xl he used it once then started cutting stuff and adding stuff he said just to many little things need fixed.but dont take this as he dosnt like it he does he just feels the need to fix everything

[@smokeslikeaboss]

Lol well sometimes modifying can be fun and helpful! Thank you for your comment!

[@michaelhartzell9758]

Me being such a cheap ass have sheet metal in my garage. I will lay the cover plate on a flat piece of steel and mark out the shape. Simple easy. I already put a pull rod on flame cover as noted on another video to allow simple movement of the flame guard. Thanks for this simple fix. It's great there's just regular people who have a determination to fix a problem instead of sitting in a rock just complaining about something. I give you a high five and thumbs up.

[@smokeslikeaboss]

Get er done. Glad to help. SMOKE ON

[@chrisbouler5631]

Ok...I've had my 1100 pro for two years now and its been good but not great. I ve experience huge temp swings from one side of the barrel to the next. So set controller to 225 and you'll get 225 on the right, 255 in the middle and 275 on the left! I just installed the heat deflector mod and the flame tamer...wow, what a difference. I set the controller to 225 and I got 225 across the barrel. Im so excited. For 75 bucks, its given my smoker a new life. Thank you soo much.

[@smokeslikeaboss]

Love to hear it! Thanks for the review and SMOKE ON

[@CarlosRodriguez-vg2ob]

this is probably the easiest install in my whole life lol . thank you very much

[@smokeslikeaboss]

Glad to hear it. Enjoy, SMOKE ON

[@PeachCoastLowrider]

did it work

[@bigvic7824]

Just installed this on my 1150 pro, haven't cooked anything with it just but Im excited to fire it up and test it 👍

[@smokeslikeaboss]

Awesome, thank you for your support! SMOKE ON

[@catchk9]

I just got mine in the mail today. About to install it. I had no idea the company was only about 35 minutes from my house.

[@smokeslikeaboss]

Love it. Thank you for supporting our small business! SMOKE ON

[@anthonym2504]

I ordered the heat deflector mod and it worked great! Did some centralized temperature tests with good results. Tests on order edges showed hotter zones with back left and center with roughly + 20-30 degree hot spot. Due to my results with pretty even zones across the center, I ordered 4 window Flame Tamer. Did a lot of testing with flame tamer with and without the bottom pitboss factory heat diffuser. Ended up pulling the bottom diffuser and ran windows front to back. Extremely happy with my results. I tested a grid roughly 2" in from outsides of grill grates. I made sure to note high/low temp swings to get my average. I am within 20 degrees all around with the exception of the left front/back. Where the heat rises due to the half round plate. I try to use the grill on slightly uneven surface to prevent so much heat rise to the left. The top rack is within 10 degrees all across! I am now beginning tests with food covering entire surface...

[@smokeslikeaboss]

Awesome Anthony! Happy smokin🔥💨

[@guysifferath5412]

Just got my mod in the mail easy install on my Navagator 1150 can’t wait to see how it works tonight on my smoked crispy chicken wings Thanks👍

[@smokeslikeaboss]

Get er done! SMOKE ON!

[@AndresCortinaRD]

Working?

[@guysifferath5412]

@@AndresCortinaRD yes they are not as bad

[@ksmiles5333]

I just ordered this and your firepot defuser for my Pitboss Sportsman 1100 . Washington State .

[@smokeslikeaboss]

Thank you for the support! It will ship out tomorrow morning.

[@ptown77]

Just installed, quick and easy. I have yet to really test my new 1150 out on a brisket or something like that, but between this mod and the fixed controller firmware, I expect great things.

[@smokeslikeaboss]

Awesome! Let us know what you think when you do a big smoke. You should be good to go!

[@andrewp7023]

How did the mod along with the firmware update do? I've got the firmware but no heat deflector/ air gap mod and am getting actual temps at grill of 50-90 degrees lower than my set/"actual" PID temp.

[@1JohnDoe]

Savannah compatible! Smoke Like A Boss has Savannah air blocker. Can’t find it anywhere else. Also ordered 4 window diffuser and heat baffles. My cooks gonna come out perfect!!!

[@bryandamkaer3646]

on my list of things to get ...

[@mikewilsonmLs]

Just got mine in the mail. Can't wait to get it on my 1100 pro series. If this evens out the temps, I'm going to be so stoked! I'll let you know how it goes!

[@smokeslikeaboss]

Awesome, you will love it. Thank you for your support! SMOKE ON

[@zamora3D]

How is it?

[@sj-xb4yz]

well?????????????????? thoughts

[@tlwayman]

Update?

[@BigWhiskey09]

Any update?

[@jaredhiggins2638]

Ordered mine yesterday and said it arrived today, I checked my mail and I wasn’t there, let’s cross our fingers it will be here tomorrow!

[@smokeslikeaboss]

Hey Jared, we checked on your order and it looks like it was the shipping notification you got. Your order is still waiting to be scanned in at USPS and tracking should update soon! Usually takes 3 business days to arrive. Let us know if you have any other questions!

[@monsterbbqindiana6579]

After 20 + years of using stick burners I now love my pellet smokers best guess I am getting lazy lol sad to say both of my Austin xl smokers were destroyed in the Dec tornado in IN and KY NOW TRYING TO REBUILD great video

[@smokeslikeaboss]

Glad to hear you're enjoying your smokers! Sorry to hear about needing to rebuild, we wish the best for ya

[@monsterbbqindiana6579]

@@smokeslikeaboss have to buy new smokers the smokers i had were destroyed also in the storm but thanks

[@djdeks21]

Just orderd one for my PB 1100. Hope this fixes my temp swings. Always burned the bottom of my ribs. Cheers!

[@smokeslikeaboss]

This will definitely help! You can also install our Flame Tamer, it will even out temps even more so across the grates, especially in the center! smokeslikeaboss.com/products/flame-diffuser-flame-tamer?variant=39542475161799

[@supertruckerrolling]

And you can make one under $10

[@ericrussell864]

Thank you I have a Laredo 1000 and did a couple cooks and put this bad boy on much better. Pretty easy to make just set the barrel on the end of a piece of cheap steel and draw with marker measured down 2 inches from top then bend 90 and I made it press fit. My pit boss rocks now thank you again.

[@smokeslikeaboss]

Awesome to hear! Thank you for the support!

[@johnabel6792]

Few questions about the Laredo if your willing to answer How do you like the Laredo? How's the smoke profile your getting? How long does it take to reach 250? How many pellets is it using per hr at 250? Sorry for so many questions I'm just thinking about picking one up

[@smokeslikeaboss]

@@johnabel6792 Hey John the Laredo is one of the Pit Bosses I don't have. Maybe soon. I wouldn't worry about the pellet consumption because it's really not that bad. It's way cheaper than propane.

[@poormanprinting7837]

Just got my grill today and find out I have to send the controller off for the new firmware 😡 but what you have here makes perfect sense also so I Just made the order ..ship baby ship lol

[@smokeslikeaboss]

Thank you for your order. It will ship out by tomorrow!

[@markkelley5649]

Mine is on its way

[@smokeslikeaboss]

Thank you for the support! SMOKE ON

[@codydonovan7356]

I've been looking at the new Pro Series 850 or 1150 from Lowes. I'm leaning towards the 1150... I've seen a lot of negative reviews about the temp control, but also heard the upgraded firmware "fixes the issue". I think most of the guys with these temp issues have been grilling in extremely cold temperatures, especially because there has been an Artic cold front in the U.S. this winter (All the reviews are from Dec- Feb). This thing looks pretty cool though! Once I get my new grill and make sure the firmware is updated, I'll test the temp control. If issues arise I think I'll give this a try! Thanks for sharing!

[@smokeslikeaboss]

Nice bud, yep once you get the update with the controller the 1150 is good to go. The heat deflector will still help control fly ash, even out your temperatures on your grill from left to right and will help you dial in on temp with less swings. SMOKE ON!

[@ksmiles5333]

Hey there, So I was about to purchase your mod for my sportsman 1100 but there's a disclaimer saying not responsible for fires or excessive ash. I'm a little bit confused does this mod cause extra stuff I routinely clean my grill after every 2 cooks. Thanks 🤙

[@jrcouch4828]

Laredo 1000 platinum series. I sure hope this works. My temp swings are real nasty. Gonna order one now.

[@jrcouch4828]

Ordered it. I am hoping it will come soon, I am very anxious to see if this helps me from burning all my meat, like I did before. Oh and that nasty pellet ash all over my grills, am hoping it stops that. I could have made my own version of this, but for 36 bucks.. why bother. Will let you know how things turn out when I get it .

[@smokeslikeaboss]

@@jrcouch4828 Let us know! It will definitely help. We've sold a serious amount of these, no complaints. Not only does it help your Boss read actual barrel temps, but it will cut down on fly ash and pellet dust on food and help even out the temperature on the grate temps from right to left. The mod will actually allow your controller temp probe to read actual barrel temps instead of heat blowing directly on it from the fire pot. Let us know how you like it when you get it!

[@jrcouch4828]

The Heat Deflector Mod came in a few days after ordering it. I have been testing it out for 2 weeks now and simply love the results. This is money well spent. I haven't burned up any of my meat since.

[@smokeslikeaboss]

We love to hear it! We're glad you are loving your results. SMOKE ON

[@gotcheese9163]

Damn you love pellet grills. Have any other grills. Can’t beat the flavor of charcoal but pellet grills are so easy to use.

[@smokeslikeaboss]

Yes I have a high dollar Weber gas grill and a Weber kettle

[@startrekrancher01]

Mine was just delivered today going to install on my rancher 1000xl tomorrow

[@smokeslikeaboss]

Awesome! Let us know how you like it once you install and smoke on it.

[@poormanprinting7837]

How dose it work?

[@startrekrancher01]

@@poormanprinting7837 great well worth the investment.

[@poormanprinting7837]

@@startrekrancher01 ty brother

[@smokeslikeaboss]

@@poormanprinting7837 It blocks hot air from the fire pot from blowing directly on the temperature probe so your temperature gage gets an actual temp reading!

[@jimswanny1193]

I have the original 820 deluxe that has the curved plate and have drastic temperature swings, after hours of videos and articles it’s the control panel that creates the swing, the way it’s set to smoke and heat causes the temporary heat rise, unless you buy a new one with the PID controller or able to upgrade as the 820 D isn’t you have to learn how to work with it.

[@doddgarger6806]

Got an austin xl 1000 397 at wm carefully rolled up some foil under left end of the deflector and it seems to hold pretty solid now not much fluctuation at all

[@smokeslikeaboss]

Foil will do the trick. Our mods are just gonna last longer without having to replace them. Thanks for the comment!

[@racer-zw8it]

Love the video!! Definitely consider!!! Ok my problem I bought the 1150g navigator one problem is big and big temp swing on the pit boss digital gauge! so the fix your talking about should fix that! My second biggest problem or my main biggest problem is that left cooks at lower temp then right side!! “On center” And I mine 100 degrees difference right side can be at 250 left side 150!! People were saying remove the heat diffuser and it fixes that!People have said it fixes it to were your temp is even all across the grill!How I don’t understand but I will give it a shot! But what I was gonna do was order smoke daddy’s diffuser that will cover the fire pot to even distribute the heat! Please help lol lost here ??

[@smokeslikeaboss]

Looks like our Group owner got in touch with you! The heat deflector will fix the temp across your grill as well! Thank you for your order. SMOKE ON

[@Glampinlife]

Just purchased for the 820 Pro - looking forward to controlling the high heat on the left side of the grill!

[@brentvandekamp3378]

Did the mod fit your 820 pro?

[@Glampinlife]

@@brentvandekamp3378 it’s actually not needed for the 820 Pro. The 820 already has this stock.

[@brentvandekamp3378]

I called to a Scheels in Mankato Minnesota and they said the support bracket on the left side was not curved like the heat shield and he could get his hands in between so that tells me that it doesn’t have the modification. I would drive there but it’s an hour and a half one-way for me

[@Glampinlife]

Once I got this to add to the grill, it lined up with what is already there. I thought this was going to add additional shielding to fix my MUCH higher heat temps on the left side of the grill compared to the right side (75+ degree difference).

[@smokeslikeaboss]

The heat deflector mod isn't needed for the 820. It fits all 1000 inch barrels and above!

[@matdowdall]

I think the new onyx edition ones have addressed many of these issues based in how the internals were putting mine together the other day .

[@smokeslikeaboss]

Yes you are right, your new onyx does not need the heat deflector! You can use one of our flame tamers to even out temps across the grates, this will get rid of your hotspot over the flame. smokeslikeaboss.com/products/new-flame-tamer-flame-diffuser-2

[@Sebas041589]

Does this work on the newer PB 1600 Pro Series 3?

[@Richard-vd2cy]

When using the fire box deflector, Can we keep the deflector plate sheet that came with the pit boss on as well?

[@daddyflip8584]

My review of left deflector and center heat shield for Sportsman 1000 (warning: long). First, know my combustion fan went out within two weeks of buying the grill, so PB sent me a new fan and complete control panel because I was getting big temperature swings and left to right temperature differences. That didn't change a whole lot with the replacement parts, but at least the grill works again. I've already tossed the thin aluminum deflector; didn't notice much difference but left it out anyway. I run three Thermoworks Signals probes in the grill to compare actual temps to the grill's probe and generally, the grill probe runs 30-50 degrees BELOW the actual temps, so my grill is always running hotter than I want it to. I have to cheat and run the setpoint lower than I really want. Review of center heat shield is easy: The center was running 50-100 degrees hotter than the sides when I'm smoking; that's been cut to 10-12 degrees on Smoke and 20-25 degrees at 225-300 actual grate temperature, so YAY for that! Just remember to REMOVE the deflector if you are going to cook or grill over 400F and/or use the open flame. Not 100% sold on the left deflector for me, but the logic makes sense (I have it permanently mounted with the screws). Based on a previous test I did, the #1 factor in temperature regulation is keeping that grill probe clean after every use; it is sensitive to smoke/soot buildup on the surface. Yes, heat rising from center to left SHOULD have an impact based on how the probe is mounted, but again, my probe always ran (and still runs) LOWER than what I call "actual" at the grates using my Thermoworks. The left side of my grill runs cooler than the center and right, so something doesn't make sense there. Last cook (June 4 2021, ambient 80F) with 8# bone-in pork butt on left side, set on P4 Smoke for four hours; grill generally ran 170-190 left and 180-200 center (butt in between these probes), which I would say is about perfect performance. Increased to 200 and cooked for seven more hours; grill ran 215-260 left and 240-280 center (remember, I have to cheat to get 225-250F). This is similar performance to electric oven cooking I have tested in the past. The grill is always going to over- and undershoot. If I could get the grill probe to better match the higher temps I'm seeing in the cooking chamber, I would be happier. The left deflector didn't do much to help this; by design, it should have HURT performance even more, but the good news is I didn't see any bad spikes and the butt turned out great with no input from me during the cook. I'll have to do some more cooks and compare to my older ones to see if the overshoot is less with the deflector. The center heat shield is the bigger bang for buck in my opinion, but I'm happy with both products and can recommend. The quality and fit is perfect, so SLaB gets a 10/10 for that. And I've gotten several positive comments on the t-shirt. Thanks!

[@smokeslikeaboss]

Love it. SMOKE ON

[@rawknee04]

I am having this same issue on my austin XL. I fabricated my own center deflector over the fire box and the curved deflector. I’ve got a more even temp (within 20-30 degrees difference from left to right) but now my problem is getting it to the temp I want overall. My control panel is reading about 20-30 degrees LOWER than the actual temps in the grill. But I can’t for the life of me get it close to 225. If I set it to 200, it runs about 240-280 and if I try the P settings, 4 is about that same 240-300, but 5 or 6 bring it down to around 200 🤦🏻‍♂️. Wondering if maybe I have a bad control board or something? I bought my xl second had but it had only been used twice with a pan and no meat had even touched the grill lol.

[@daddyflip8584]

@@rawknee04 if your deflector is a C or [ shape (you know what I mean), position it so the openings are front to back instead of left to right. That blocks the air heat from going to the ends. That gave me a more even heat. It's been awhile since I tested mine, I've just been living with it and cooking by feel- trusting the number even if it isn't right. I pulled my probe and cleaned it once but don't remember what it did. Your P temps sound a little high, but I'll do a test tomorrow and reply back with what I see. Maybe we think of an idea for you. Pit boss sent me a replacement fan and board no questions asked. I'll

[@rawknee04]

@@daddyflip8584 you’re the man! Thank you

[@daddyflip8584]

@@rawknee04 Here's my vid testing my grill for you. It's an hour long without sound so just watch the numbers (might be better at 2x speed) but read the description. kzbin.info/www/bejne/o6iydmaOopaGqM0 And here's the setup vid kzbin.info/www/bejne/iZaqZIelj6l9Zsk

[@michaelstorm5475]

Good afternoon. On my Austin XL if I set it to 225 it starts feeding pellets and heats until 275 and then stops until it goes back down to 225 continuously. Is that what you are referring when talking about temperature swings? What does a normal cycle look like with your mod installed? Thanks!

[@smokeslikeaboss]

Yes that's what I am talking about. Fold up a piece of tin foil 5x over and block the gap on your smoker and you will see what the heat deflector does... then you can buy the deflector mod for a permanent fix once you try it out!

[@chadashton7029]

Does the Platinum Laredo 1000 suffer from the temp swings and would there be any benefit to this mod on that particular grill? I was thinking about getting one and seems that a common issue is center hot spot so I was looking to get at least a new heavy-duty heat diffuser. Thoughts?

[@smokeslikeaboss]

Hello! Yes the heat deflector mod will fit this model. It will help with temperature swing issues and even out temps across your grates. The flame tamer mod we also have on our website will help with the hot spot in the center of your grill. www.smokeslikeaboss.com

[@jekinneys]

It's a weird omission as the other models had it. I own them for the value and love it but still makes me wonder how it got past testing and QA before being shipped.

[@JunCna]

Wouldn't you want quicker and accurate reading on the RTD probe? The whole reason it swings is when the RTD probe detects temperatures lower than the set temperature it feeds it pellets. When the RTD probe doesnt heat up fast enough the pellet grill feeds pellets longer to the hopper (another factor temperature loss through smoke stack or just environmental factors) which then when all lit up causes the temperature to swing much higher than the set temperature on the controller. Good mod though to reduce the ashes though.

[@smokeslikeaboss]

If you want an accurate reading on the RTD probe, wouldn't you want to block the direct heat from the fire pot blowing directly on it? If you want to stop by and see the smokers in action with and without the mod so you can see for yourself, let me know! [e-mail]

[@TimberRidgePro]

Purchasing the Pit Boss pro series 1150 today and doing some more research. Does this mod come with one deflector for each side or do you need to buy two (one for L and one for R)? Website shows only one in the purchase with two self tapping screws, but just curious if this needs to be done on both sides.

[@smokeslikeaboss]

Hello! You will just need to purchase one. It goes on the left side where the flame is blowing directly onto your temperature probe. It will even out temps on both sides once installed.

[@sj-xb4yz]

I figured this same thing the other day....my temps are crap on the sprts 820. I was thinking of making two vent holes on the opposite side of the thermometer, on the broiler plate to allow more heat on the "cold"side? I'll give your idea a shot before I start really modify'n. damn pit boss should take care of this along with missing the 275' temp...grrrrrrrrrrr

[@smokeslikeaboss]

The heat deflector won't work on this model. It already basically has one built in. You can try one of our flame tamers to help evenly distribute heat across your grates. Let us know if you're still struggling and we can help you out.

[@GUNZ25625able]

I just put an order in for the air gap mod, and the fire pot flame tamer

[@smokeslikeaboss]

Thanks for your support, we hope you are enjoying the mods :)

[@CDW188]

Having the same issue on the Laredo 1000 and Pro Series 1150. Taking the heat deflector out helped even temps across the grates, but the PID temp probe still gets blasted. This makes the PID stop 25-40 degrees short. Any luck using it on a Laredo?

[@smokeslikeaboss]

Yes, this works on all 1000" barrels! The heat deflector will help with the temperature swings and the heat side to side across the grates.

[@redbone7040]

👍💯

[@smokeslikeaboss]

SMOKE ON 💯

[@andonakisg1499]

Hello. Will this fit the 1150 pro series? On your web it does not have 1150. Thanks. Plus will removing heat shield have the same effect?

[@smokeslikeaboss]

Yes this will work for your 1150 Pro. Removing the heat shield will help a little bit but the Heat Deflector Mod will fix the temp swings.

[@manuelz32u60]

Will this fit on the pro series 850?

[@jbram08]

I just got the 1150 pro series and have read several people who have controller issues. I've smoked 4-5 times and haven't seemed to run into any issues? Is this an issue on older 1150's or have I just yet to experience this issue? Just curious if there's something I need to pay attention to.

[@smokeslikeaboss]

Pit Boss has been working to update their controllers so you probably just have a newer controller and are good to go!

[@itsschiegg]

Do you notice and difference with the very bottom (thin) heat deflector removed? I've heard it helps with the uneven temps across the grill, but curious with your experience

[@smokeslikeaboss]

The small thin piece is what Pit Boss was recommending everybody to remove when they were first trying to solve the temp issues but it does not resolve the problem entirely. The parts that we sell will actually solve the problem. Let us know if you have any questions! www.smokeslikeaboss.com

[@donnyzarra]

Well, I just ordered one. It looks like if you are mounting it you put it on the outside of the existing “shelf” and if you are setting it down, the you lay it on the inside of the shelf. Is that correct?

[@smokeslikeaboss]

Either way will work. You can just set it there but your order will come with two self tapping screws that will enable you to screw it into place. It should be pretty obvious but if you're still confused send us an email at [e-mail] and we can send you some installation pics. Or this video will show you also! SMOKE ON

[@mikelococo3254]

This video is older but thanks for coming up with this mod…. My main question and concern is the rear of your grill. Is it disintegrating? It appears to to riddled with holes?

[@smokeslikeaboss]

None of my videos are older than 7 months old, I use my bosses all the time for the last 7 years and you're welcome for the mod. My mods work on the newer grills also, all my Pit Bosses are in 100% working order and no they have absolutely no rust or holes,, Have a great day

[@rorysuire6177]

@@smokeslikeaboss did you also make the diffuser plate? I've been looking for one. None.

[@smokeslikeaboss]

@@rorysuire6177 Yes we do, it's available at www.smokeslikeaboss.com

[@Rbouch]

Tom, will this work on the pro series elite or is it not needed?

[@smokeslikeaboss]

Yes it will!

[@supertruckerrolling]

I have the 1000XL and noticed that the traeger had a heat shield over the burn pot so I'm gonna make my own to put over it. Anything on the bottom cooks too fast in the center so it should help

[@smokeslikeaboss]

We also have a flame tamer mod if you don't want to take the route of making your own: smokeslikeaboss.com/products/flame-diffuser-flame-tamer

[@supertruckerrolling]

@@smokeslikeaboss lol yeah appreciate it but I can make the same thing under $10

[@smokeslikeaboss]

@@supertruckerrolling more power to you, not everyone can bend steel to the exact specifications needed for their model. And ya we could sell it for $10 and lose money after shipping and website costs. The thing about running a business is you gotta make $$. Have a good day!

[@supertruckerrolling]

@@smokeslikeaboss oh exactly lol you can't sell it that cheap you'd loose your butt. I haul metal and steel and if a guy had a sheet and cut it up bent it I'm a brake maybe $5 but you have labor, overhead, shipping etc

[@DrLumpy]

I used a different solution that I think is simpler, and costs less. Buy a replacement temp sensor probe, just like the vertical one in the PitBoss. Unplug the stock sensor electrical connector, plug in the replacement sensor, then route the thing so that the actual probe is right next to your pan, roast, chicken, whatever. Then the PitBoss brain is sensing the temp right at the food's location. Costs about ten bucks. Requires removing those screws on the bottom of the pellet hopper to access the probe connectors. Takes about 30 minutes if you're a geriatric guy with arthritis and have a cordless screwdriver.

[@goocherrific]

I first thought you said Tom Bodett and your voice made me think it was then I went back and I was wrong...... Would you give me a "we'll leave the lights on for you" for me anyway?

[@jaycharles9548]

Also , before buying a new Pit Boss 1600 how can I find out if it has the latest new and improved temperature control ?

[@smokeslikeaboss]

Hey Jay, that would be a question for Pit Boss. Most people aren't having issues with the controller on this model, I'm gonna get one!

[@eddiec3880]

Does this also fit the Charleston? Looks like it but not listed on their website of fitment.

[@smokeslikeaboss]

Thanks for reaching out! Yes it does, we actually just added it to the list. Let us know if you have any other questions. www.smokeslikeaboss.com

[@davehorlacher]

I wonder if Pit Boss fixed this issue with the new firmware upgrade. Without seeing the code I cannot see if they are adjusting swinging temps settings of what the internal probe is reading. This would be the cheapest and easiest way to fix the issue. My updated firmware controller (3/2021) showed no difference between using the heatshield or not. I would like to see the code. But using the heatshield it took a lot longer to get to temp. More testing is required. I will say under a thermal cam the Heatshield helps with even temps.

[@smokeslikeaboss]

Well we hope you get it figured out. Hopefully it works for you as it has for thousands of others with literally only one or two complaints...My heat shield sells itself, if you have any other questions or concerns you can email me at [e-mail]

[@Kusv583]

A few months back I purchased the KC Combo and have had nothing but problems with it. The fluctuation is so dramatic that I have my doubts if this fix will help. Today I attempted to smoke a Christmas ham for the family but failed. I set temp at 250 but rarely would it reach that. It mostly stayed in the 125- 225 range. I understand a 10 degree difference, but 100?? 🤬

[@smokeslikeaboss]

We've sold nearly 10,000 units with little to no complaints. This will definitely help with those temp swings! smokeslikeaboss.com/products/heat-deflector-mod

[@shawn7913]

Does your ribs burn on the bottom if you place them over the sear cutout? Even with them closed my ribs burn on the bone side at 225. I've got to place the somewhere else in the grill or some kind of mod. I have the pro series 1100 xl

[@smokeslikeaboss]

You just need the heat deflector mod, this will even out your temperature fluctuations and help even out temps across the grates. The flame tamer gets rid of the hot spot in the middle. SMOKE ON www.smokeslikeaboss.com

[@shawn7913]

@@smokeslikeaboss you should make a video on this mod too!

[@martincanella3738]

Have you made the correction to new models or do we need to spend the extra $$

[@smokeslikeaboss]

We have been selling this mod for over about two years and even the newer models will see a benefit with the mods!

[@jaycharles9548]

Do these work on the new Pit Boss 1600 ? Is , how do we get one ?

[@smokeslikeaboss]

Hi Jay! Yes they do. Here is the link to purchase: smokeslikeaboss.com/

[@emmyjosumpter9897]

He dosnt want me telling people but i showed my husband a vid of people cutting there grill to make emptying the ash easier.he laughed said he could make it easier so i challenged him .now he can empty the ash with his thumb in 2 seconds.he made the slide for the sear plate fron the tool for cleaning a shot gun

[@smokeslikeaboss]

That's awesome!!

[@kwhicksjr]

mount the deflector INSIDE or OUTSIDE the existing "shelf"?

[@smokeslikeaboss]

I mount mine on the outside but either way will do the trick!

[@jackmehoffer1037]

I have the tailgater and since new that thing goes from 300 down to 120 then back up to 325 and so on. Can’t get it to stay at 225 to save my life. You would think pit boss would figure this out and fix their issue

[@smokeslikeaboss]

Join my Facebook group 120k members, we answer tons of questions in there and could hopefully help you figure the issue out! facebook.com/groups/153627291981641/?multi_permalinks=812438079433889

[@jeffwagoner1890]

Lockhart has the same issue, air gap between the plate and bracket.

[@smokeslikeaboss]

I don't have a Lockhart. I have about every other model. If you want to try one out, we'll send you one for free. Send us an email at [e-mail] with your address

[@jeffwagoner1890]

I love the lockhart, damn good grill thus far since I've only had it since march. I do have another pitboss it's a copperhead series 5 which I've had for over 2 yrs. The copperhead was my first pitboss other than an old stick burner that I've used for about 14-15 yrs. Mt email is [e-mail]

[@PRINCEAND0104]

I have an 820 can I install one on the other side to leave it out

[@smokeslikeaboss]

Hey! The heat deflector mod isn't needed for the 820. SMOKE ON

[@rodneywinders3596]

I just got mine. Does the flange go below or on top of the existing bracket?

[@smokeslikeaboss]

Hi Rodney. The lip of the heat deflector sits on top of the bracket already there. There will be two small holes and that's where you screw in your self tapping screws. For more info, watch this video. Thanks for your support!

[@dfrmotorsports4591]

Why isnt the base plate in the grill? The big sheet aluminum panel

[@smokeslikeaboss]

I've removed that in all my Pit Bosses... It doesn't really do anything. Pit Boss customer service was actually having everyone remove that piece if they experienced temp issues but then I figured out the mods 😎

[@andrewwaller55]

Yo! I’ve sent you guys an Email regarding the deflector plate. Would love to purchase one but not sure if it will fit my Navigator 550g?!. Thanks

[@smokeslikeaboss]

Hey Andrew, I believe we got back to you via email but just to answer this here, yes it will work on that model! Thank you and SMOKE ON :)

[@danieljames3223]

Would this mod be needed/recommended for the Savannah?

[@smokeslikeaboss]

We just came out with a mini version that will fit your Savannah. I'll link it for you! smokeslikeaboss.com/products/mini-heat-deflector-air-gap-mod

[@AndresCortinaRD]

Is this needed on the 1150? Heat Deflector and Flame Diffusser ? both ?

[@smokeslikeaboss]

The heat deflector mod will help with temperature fluctuations by preventing heat from blowing directly on your temp probe. It will help stabilize the temps across your grates and help with fly ash. The flame tamer will get rid of the hot spot directly in the middle of your grates. So both together would improve your Boss!

[@rfo23]

Great idea. Do you ship to Canada?

[@smokeslikeaboss]

Yes we do! smokeslikeaboss.com

[@rfo23]

@@smokeslikeaboss thank you. Once I get my Pit Boss 850, And it doesn’t have that curve, I’ll be sure to order. Thanks.

[@smokeslikeaboss]

@@rfo23 Your 850 will already come manufactured with this in place. The mod is for all 1000" barrels and above that have this gap. So you are good to go with your 850!

[@jlittleton4241]

Does the New 1150 Pro Series 3 work with this?

[@smokeslikeaboss]

Hi, yes it does! Our flame tamers will work as well.

[@Apaolino21]

Anyone know if the Pit Boss Pro 850 needs/benefits from this?

[@smokeslikeaboss]

Hello! The 850 doesn't need this mod. It already has it built in. You can go for our flame tamer... it will help get rid of the hot spot over your flame and help to even out temps across your grates: smokeslikeaboss.com/products/new-flame-tamer-flame-diffuser-2

[@Apaolino21]

@@smokeslikeaboss Awesome! I will do that. Thank you so much!

[@reynaldowalker2859]

Do this work on the pit boss 1000d3

[@smokeslikeaboss]

Yes sir

[@brentvandekamp3378]

Does this work for the sportsman 500 or 820. Looking at buy either one. no one close to me has either of them so I can't inspect them.

[@smokeslikeaboss]

Hey Brent, the modification will not work for these models. These are already built with this type of heat deflector modification. Let us know if you have any other questions. SMOKE ON

[@brentvandekamp3378]

@@smokeslikeaboss I called Scheels in Mankato MN and they looked at the sportsman 820 on the floor and the support bracket is flat and not curved like the heat shield is. The guy said his fingers fit in between the bracket and shield.

[@smokeslikeaboss]

@@brentvandekamp3378 If it is flat and not curved then yes you can install the heat deflector however we are confident that all models of the 500 and 820 have this curved piece. Maybe check it out for yourself before you buy it... we have a Facebook group of 100k+ members and the people with these models do not need it. Hope that helps.

[@alexandrzejczak6848]

How can i get one for my xl.

[@smokeslikeaboss]

www.smokeslikeaboss.com

[@curtiswarnar4322]

Do you make these for the 440D?

[@smokeslikeaboss]

No this modification will not work for the 440D, that model already comes with the correct bracket! Let us know if you have any additional questions!

[@ryanragan8899]

Has anyone installed this mod on the inside of the ledge? This video shows it mounted to the outside of the ledge and im worried the weight of the deflector will eventually rip the screws out of the holes. Is eveyone mounting these to the outside or the ledge? Has anyone tried mounting to the insdie?

[@smokeslikeaboss]

I have had one installed for years and no issues with it coming off. The stainless steel is not so heavy it will do that but still heavy enough to deflect heat. You can definitely mount it on the inside if you prefer, it works just as good that way!

[@mikehensley3486]

will this work on the pro series 1600?

[@smokeslikeaboss]

Yes it will!

[@John-lc7fq]

Does the 1600 need one of these? I'm getting ready to go buy one.

[@smokeslikeaboss]

Yes, the heat deflector will allow your temp probe to read actual barrel temperatures, reduce fly and pellet ash, and even out temps across the grates. It's just a little mod that will improve your smoking experience!

[@John-lc7fq]

@@smokeslikeaboss Do you have the deflectors for the 1600?

[@smokeslikeaboss]

@@John-lc7fq The heat deflector is standard and will fit all 1000 inch barrels and above. You can order one here: smokeslikeaboss.com

[@nathanloughner7883]

I've got a Laredo 1000 Platinum series, do you think this would work on it?

[@smokeslikeaboss]

Hey Nathan, yes this will work on your Loredo 1000. Let us know if you have any other questions!

[@nathanloughner7883]

@@smokeslikeaboss great! I just ordered one from you, thanks 👍🏻

[@smokeslikeaboss]

@@nathanloughner7883 Thank you for your order! Let us know how you like it.

[@nathanloughner7883]

@@smokeslikeaboss I got the mod and installed it. Works GREAT! Very smart and simple, easy to install and best of all it WORKS! Thank you.

[@smokeslikeaboss]

@@nathanloughner7883 that's how we do it over here. SMOKE ON

[@bvleyva7425]

I just got my controller back from pit boss (firmware update) they say to put everything back to stock. I’m due to receive my plate tomorrow, does anyone have knowledge on this?

[@smokeslikeaboss]

Hey! Run it stock for a while, if you wish. If it was me, I'd install the deflector mod when you receive it. Not only does it help your Boss read actual barrel temps, but it will cut down on fly ash and pellet dust on food and help even out the temperature on the grate temps from right to left. The mod will actually allow your controller temp probe to read actual barrel temps instead of heat blowing directly on it from the fire pot. Let us know if you have any other questions!

[@bvleyva7425]

@@smokeslikeaboss thank you!

[@Hi-TechHillbilly]

Do you know if the plate will fit on Lexington model? Same problem but I'm unsure if the dimensions are the same

[@smokeslikeaboss]

Hello- The lexington has this built in already. So no, you do not need this mod!

[@smokeslikeaboss]

Join our Facebook group, over 170k members. It's a helpful way to get tips on smoking with your specific model: facebook.com/groups/153627291981641

[@Hi-TechHillbilly]

Maybe some do but I have a smaller Lexington and it doesn't. It looks exactly like the ones in the video

[@smokeslikeaboss]

@@Hi-TechHillbilly If you want to give it a shot, you can order. If it's flat there on the side, instead of curved, you're welcome to try it out... we have a Facebook group of 170k members and from what we've experienced, it won't fit.

[@O.G.Alphaborn]

I thought the gap was for smoke release?? I bought one about 2 years ago. Everything seemed to be working great. Now all of a sudden I cant get my grill to heat above 300. With the deflector off, I can heat to about 325 barely. 1600 pro PB

[@smokeslikeaboss]

Issues with controllers on those, you have to have a properly working controller to reap the benefits of the mods. You are under warranty I would hit up Pit Boss for new controller

[@O.G.Alphaborn]

@Smokes Like A Boss I did waiting on shipment

[@bowallace7093]

Does this work on the PBR-X3800 mega grill? 😂

[@supertruckerrolling]

You can make one for under $10. I bought a piece of metal at menards making the same thing

[@smokeslikeaboss]

Our mods are patented.Just a heads up!

[@danielploy9143]

That temp probe is in a thoughtless spot... close as possible to center and protected from fan flames would be ideal. I hate my 820D massive temp swings without smoke flavor. I consider this model a crappy easy bake oven...

[@danielploy9143]

@Brennan Titan your too many funnies.

[@smokeslikeaboss]

Sorry for your experience, if you wanna message me or join the Facebook group, maybe I can help you along. 820's rock. Link in the video description if you need some help

[@eddiegoodman8411]

Will this fit the pro series 600?

[@smokeslikeaboss]

Hello! Unfortunately no it will not work on that model. It is for all 1000" barrels and above. Let us know if you have any other questions!

[@tomrum42]

@@smokeslikeaboss According to your website the 600 is listed as being compatible! I have a Pro Series 600 from Lowes and based on the fact that your website shows the Heat Sheild as being compatible with the 600 I ordered one. After installing it on the Pro Series 600 my grate temps were 60-70 degrees over the controller set temp. I have removed the Heat Shield from my 600 and am now out the amount that I paid for it. I strongly suggest that you update your website and remove the 600 as being compatible. I basically wasted my money due to the mis-information shown on your website for the Heat Shield and of course you have a "no return" policy.

[@smokeslikeaboss]

@@tomrum42 That seems odd. We've literally sold thousands of our heat deflectors to customers with the 600 with no complaints until now. We will be happy to work with you regarding your order. Please reach out to me at [e-mail] and we can figure something out.

[@johnmoffatt8209]

will this fit a pro series 820?

[@smokeslikeaboss]

Hi John, no this will not. It's created for all 1000" barrels and above. SMOKE ON!

[@johnmoffatt8209]

@@smokeslikeaboss Bummer, thanks for replying though, I dig your work.

[@smokeslikeaboss]

@@johnmoffatt8209 thank you for subscribing!

[@chriskelley2436]

I just bought one and instead of the temp being 50 degrees to lower now is 50 degree higher

[@smokeslikeaboss]

Hey Chris, this should not happen. Shoot us an email at [e-mail] and we will get you dialed in.

[@charlesthomas2586]

How much is that piece

[@smokeslikeaboss]

Hello! The heat deflector mod is $36. You can purchase at smokeslikeaboss.com

[@MrC9Oh3]

Could this be why mine doesn't reach temp? If i want to hit 225 i have to set it for like 250 let it hit 225 then back it down..

[@smokeslikeaboss]

I'm guessing you have an 1150, but what model do you have?

[@MrC9Oh3]

@@smokeslikeaboss PB1100PSC2, it has propane and pellet.

[@smokeslikeaboss]

@@MrC9Oh3 are you dialing in your P setting before turning up to temp? P Setting carries over to dial temp and helps calibrate your auger motor to your current weather conditions so that your Boss runs at optimal performance

[@MrC9Oh3]

@@smokeslikeaboss no, how do i do that?

[@smokeslikeaboss]

@@MrC9Oh3 Here is a link to a detailed description on adjusting your P-Setting: smokeslikeaboss.com/pages/pit-boss-p-setting-explanation

[@MrTerryTurtle]

Do u ship to Australia

[@smokeslikeaboss]

At this time due to shipping costs we can't ship to Australia. Sorry about that!

[@MrTerryTurtle]

@@smokeslikeaboss no problem thank you for the info