Fixing a free Generac pressure washer

Price was right. Pretty simple fixes to be honest.
Contact me…
[e-mail]

[@Vv_Twisted_vV]

Never a good idea to run a pressure washer without water connected to the pump, this is what lubricates it.

[@dreechino3492]

You're wrong oil is what lubricates the engine the water is just an add on piece

[@pilgrimsgarage]

@dreechino3492 I’m well aware of how oil works.

[@adriel9655]

Great video. Just curious what did you spray on the carburetor? Thanks

[@pilgrimsgarage]

I just used a can of carb cleaner. In a pinch you can use brake clean also. Thank you for the compliment. Cheers!

[@adriel9655]

@@pilgrimsgarage right on. Thanks for the response 👍👍👍

[@simplistic2143]

mines cut off in 3-5 seconds when i pull the trigger, how can i fix it ?

[@pilgrimsgarage]

It sounds like you’re losing prime. I would start with checking your pressure hose and make sure it’s tight on the pump and on the gun. If those are not leaking then I’d check your hose from the house. Sometimes the pump is more powerful then your supply from the house. I have a well and it has pretty good pressure but my friend that I got it from also had a well and it couldn’t keep up with the demand the pressure washer needs. The way to remedy that is check your hose to make sure it doesn’t have any kinks and that it’s flowing well. Keep me informed with your results please.

[@adkjenaas1]

What were you spraying throughout the video?

[@pilgrimsgarage]

I’m not sure what you’re asking. Water?

[@StrawberriesChocolate]

What was in the blue can that you were spraying on the machine

[@pilgrimsgarage]

@@StrawberriesChocolate uh, I think you’re referring to the starting fluid. Generacs always have a shut off for the fuel. I had the fuel off but I still wanted it to fire. My bad…I misunderstood you. Sorry 😣

[@StrawberriesChocolate]

No worries! I didn't ask the original question but had the same one so I figured I'd clarify! Thanks for the response

[@josephkaple8923]

Next video how to replace the water seals on the pump I destroyed running it without the water supply hooked up.

[@thegermany30]

Hello i have one of this same model.. but its leaking gas from the cap... I check the gasket and is good... any advice?

[@pilgrimsgarage]

@@thegermany30 that sounds like it would need a new cap? I’m not sure without looking at it. It could have a small crack in it. Fuel is very thin and can find even the smallest hole to come through. That’s is about the best I can say to try.

[@matthewlortz5811]

Great video only thing that killed me was the sandals while using it XD

[@muckville9195]

LOL... that's how I always pressure wash. Have for many years

[@danielboggs503]

"DUMBASS" LOL

[@bernardmacarius2635]

No water running to pump while starting is huge no no I was told, instructed and just common sense. Ah well, mine still is not running...

[@acypooder1]

OMG ARE YOU STARTING IT WITHOUT WATER , SMH after you figure out the initial problem your gonna need a new pump

[@pilgrimsgarage]

Haven’t needed a new pump and I use it pretty consistently. You can run them without water for a little while… no harm will happen.

[@fiftyoon]

Great video. I have a 2500 psi Generac pressure washer and the spring on mine also came detached from both ends. Any chance you could show or explain where the spring ends should be attached? I'll also email you. Thanks!

[@pilgrimsgarage]

Got your email, I responded the best way I could.

[@midwestrebel655]

I have the same power washer, last year I had to tear it CD apart clean everything before it would run. Now again after following all the recommendations in storage, once again it’s nit starting. Of course once I use it, it’s out away for 11 months 😂. Hate that machine, I want to get an electric one. I just don’t use it, my wife likes a clean house.

[@pilgrimsgarage]

I totally get it. I like the gas powered ones because they’re more powerful but the electric ones are so much more reliable.

[@zoghunter82318]

So basically some idiot put to much oil in it and hydro locked it then gave up on it and junked it? lol

[@pilgrimsgarage]

Not really, he forgot to turn the fuel off and over the winter it leaked all the fuel into the crankcase and hydro locked it. It didn’t bend anything so it is good. I literally used it this last weekend and it’s awesome

[@kevinstewart1898]

I've got the same pressure sprayer...cost was over $ 400 dollars...I would give him some money too

[@pilgrimsgarage]

We squared up with a much better trade. I’m glad someone else feels the way I do too😊

[@christianmelchor6953]

Yeah sure diy and first thing is let get my micro camera

[@pilgrimsgarage]

Well, he told me it was locked up when he tried to start it. It turned over for me so I thought I’d see if there was any damage done to the engine if it had truly hydro locked. As you can see it was not by the camera. That little thing is super handy to look before you leap. I do appreciate the input though, truly I do.

[@JPW98cleans]

Thank you so much had problems with my ridgid and you got it running thanks man

[@pilgrimsgarage]

You’re welcome. I’m glad I was able to help. Thank you again for the compliment.

[@kyleortman6689]

Rips the paint right off! 😂

[@pilgrimsgarage]

Yeah, that was a bit unexpected. Can’t argue with that 😉

[@arturoochoa4388]

Ho there, nice video, have a question, on that Generac Washer, my water inlet nut is loose, lost the thread, how can I change it..?

[@pilgrimsgarage]

That I’m not sure of. Let me take a look at mine. Did you say it’s the water inlet? Is that where you hook up your hose correct?

[@arturoochoa4388]

@@pilgrimsgarage correct

[@jasonbrindamour903]

Buy a different brand... these generacs are full of cheap die cast aluminum threads... connected to disimular metals...an over 80 year known way to create corrosion.

[@pilgrimsgarage]

@@jasonbrindamour903 well this one was free so there’s that 😉. You are correct though, they’re not quality made.

[@kriscullen3378]

Great video!

[@pilgrimsgarage]

Thank you. Minus getting stung by a wasp it was a great day😉

[@Bear_83]

Someone in my area. Has same one for free said it need. A. New pump. Dunno the cost deciding to take on this project. Is it worth it for price of new pump. If it is only the case?

[@pilgrimsgarage]

I’m not sure of the price but they are between $250-$500 new. It might be worth it. They’re super simple to replace.